Joel Stanley 4b70c62b9e net: ftgmac100: Request clock and set speed
According to the ASPEED datasheet, gigabit speeds require a clock of
100MHz or higher. Other speeds require 25MHz or higher. This patch
configures a 100MHz clock if the system has a direct-attached
PHY, or 25MHz if the system is running NC-SI which is limited to 100MHz.

There appear to be no other upstream users of the FTGMAC100 driver it is
hard to know the clocking requirements of other platforms. Therefore a
conservative approach was taken with enabling clocks. If the platform is
not ASPEED, both requesting the clock and configuring the speed is
skipped.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18 12:09:06 +01:00
..
2017-10-04 17:34:41 +01:00
2017-10-03 08:57:07 -07:00
2017-09-10 20:40:00 -07:00
2017-09-07 14:03:05 -07:00
2017-09-07 13:51:13 -07:00
2017-09-05 11:08:17 -07:00
2017-10-04 17:11:53 -07:00
2017-09-10 20:40:00 -07:00
2017-09-29 14:19:44 +10:00
2017-08-29 13:46:35 +02:00
2017-09-12 13:30:06 -07:00
2017-09-05 11:08:17 -07:00
2017-08-22 11:04:51 -07:00
2017-09-11 13:04:32 -07:00
2017-09-07 13:51:13 -07:00
2017-09-09 14:34:38 -07:00
2017-09-13 10:56:00 -07:00
2017-10-07 12:34:16 -07:00
2017-09-05 12:45:03 -07:00
2017-08-30 14:03:42 -06:00
2017-09-14 13:33:33 -07:00
2017-09-07 21:11:05 -07:00
2017-09-29 12:24:28 -07:00
2017-08-24 09:57:28 +02:00