iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/tty/serial
History
Ian Abbott 1c9c858e2f serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards 
The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta
Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports,
respectively.  The first 4 ports are implemented by an OX16PCI954 chip,
and the second 4 ports are implemented by an OX16C954 chip on a local
bus, bridged by the second PCI function of the OX16PCI954.  The ports
are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a
non-standard oscillator frequency of 20 MHz (base_baud = 1250000).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06 09:47:52 +01:00
..
8250
serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
2017-02-06 09:47:52 +01:00
cpm_uart
tty: serial: cpm_uart: make use of for_each_node_by_type()
2017-02-03 10:12:16 +01:00
jsm
tty: serial: jsm_tty: constify uart_ops structures
2016-09-02 15:01:16 +02:00
21285.c
…
altera_jtaguart.c
serial: altera: constify uart_ops structures
2016-09-02 15:01:16 +02:00
altera_uart.c
serial: altera: constify uart_ops structures
2016-09-02 15:01:16 +02:00
amba-pl010.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
amba-pl011.c
tty: serial: pl011: add ttyAMA for matching pl011 console
2017-02-03 10:12:16 +01:00
amba-pl011.h
tty: amba-pl011: clean up LCR register offsets
2015-12-13 19:59:48 -08:00
apbuart.c
…
apbuart.h
…
ar933x_uart.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
arc_uart.c
serial/arc: constify uart_ops structures
2016-09-01 21:05:41 +02:00
atmel_serial.c
tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
2017-01-11 08:18:45 +01:00
bcm63xx_uart.c
serial/bcm63xx_uart: constify uart_ops structures
2016-09-02 15:01:16 +02:00
bfin_sport_uart.c
tty: serial: constify dev_pm_ops structures
2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
…
bfin_uart.c
serial:bfin-uart:Remove 'struct timeval'
2015-12-13 19:59:48 -08:00
clps711x.c
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
2016-07-06 17:38:16 +02:00
crisv10.c
serial: crisv10: fix invalid user-pointer check
2016-11-10 14:41:25 +01:00
crisv10.h
…
digicolor-usart.c
tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE
2016-02-14 17:39:36 -08:00
dz.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
dz.h
…
earlycon-arm-semihost.c
tty/serial: mark __init early_smh_setup() static
2016-09-02 15:03:35 +02:00
earlycon.c
ACPI: parse SPCR and enable matching console
2016-09-28 17:46:46 +02:00
efm32-uart.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
etraxfs-uart.c
serial: etraxfs-uart: Fix crash
2015-11-20 16:19:54 -08:00
fsl_lpuart.c
tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
2017-01-12 11:51:24 +01:00
icom.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
icom.h
…
ifx6x60.c
serial: ifx6x60: Free memory when probe fails
2016-11-10 14:50:46 +01:00
ifx6x60.h
…
imx.c
serial: imx: Fix the CTS_B polarity in RS485 mode
2017-01-31 10:54:58 +01:00
ioc3_serial.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
ioc4_serial.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
ip22zilog.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
ip22zilog.h
…
Kconfig
tty: serial: lantiq: implement earlycon support
2017-01-12 11:51:24 +01:00
kgdb_nmi.c
…
kgdboc.c
…
lantiq.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
lpc32xx_hs.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
…
m32r_sio.c
serial: m32r_sio: make it explicitly non-modular
2016-06-25 14:00:06 -07:00
Makefile
tty: serial: Makefile: move kgdb to be initialized last
2016-10-27 16:27:24 +02:00
max310x.c
serial: max310x: Add support for newer silicon revisions
2017-01-12 11:51:24 +01:00
max3100.c
tty: serial: constify uart_ops structures
2016-09-02 15:01:16 +02:00
mcf.c
…
men_z135_uart.c
tty: serial: constify uart_ops structures
2016-09-02 15:01:16 +02:00
meson_uart.c
tty: serial: meson: allow baud-rates higher than 115200
2017-01-19 14:38:57 +01:00
mpc52xx_uart.c
tty: serial: constify psc_ops structs
2016-02-06 22:31:47 -08:00
mps2-uart.c
serial: mps2-uart: make driver explicitly non-modular
2016-06-25 14:01:57 -07:00
mpsc.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
msm_serial.c
tty: serial: msm: Fix module autoload
2017-01-12 11:51:25 +01:00
mux.c
…
mvebu-uart.c
serial: mvebu-uart: free the IRQ in ->shutdown()
2016-06-25 14:00:06 -07:00
mxs-auart.c
serial: mxs-auart: support CMSPAR termios cflag
2017-01-12 11:51:24 +01:00
netx-serial.c
…
omap-serial.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
pch_uart.c
serial: pch_uart: add terminate entry for dmi_system_id tables
2016-10-27 16:01:31 +02:00
pic32_uart.c
serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy
2017-01-12 11:51:24 +01:00
pic32_uart.h
serial: pic32_uart: Add PIC32 UART driver
2016-05-13 14:01:56 +02:00
pmac_zilog.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
pmac_zilog.h
…
pnx8xxx_uart.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
pxa.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
rp2.c
…
sa1100.c
…
samsung.c
serial: samsung: enable clock before accessing interrupt mask resister
2017-02-03 10:12:16 +01:00
samsung.h
serial: samsung: Simplify DMA engine initialization code
2017-01-12 11:51:24 +01:00
sb1250-duart.c
…
sc16is7xx.c
Merge 4.9-rc3 into tty-next
2016-10-30 06:42:10 -04:00
sccnxp.c
…
serial_core.c
Replace <asm/uaccess.h> with <linux/uaccess.h> globally
2016-12-24 11:46:01 -08:00
serial_ks8695.c
serial: Fix ASYNC_* => UPF_* flags misuse
2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c
serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h
serial: mctrl_gpio: add modem control read routine
2016-06-25 14:30:42 -07:00
serial_txx9.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
serial-tegra.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
sh-sci.c
serial: sh-sci: make RX FIFO parameters tunable via sysfs
2017-02-06 09:47:52 +01:00
sh-sci.h
serial: sh-sci: consider DR (data ready) bit adequately
2017-02-03 10:14:10 +01:00
sirfsoc_uart.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
sirfsoc_uart.h
serial: sirf: make fifo functions static
2016-06-25 14:01:57 -07:00
sn_console.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
sprd_serial.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
st-asc.c
serial: st-asc: constify uart_ops structures
2016-09-02 15:01:16 +02:00
stm32-usart.c
serial: stm32: mark symbols static where possible
2016-09-27 12:55:27 +02:00
stm32-usart.h
serial: stm32: Fix comparisons with undefined register
2016-10-27 16:00:31 +02:00
suncore.c
…
sunhv.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
sunsab.c
…
sunsab.h
…
sunsu.c
serial: sunsu: Free memory when probe fails
2016-11-16 10:57:26 +01:00
sunzilog.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
sunzilog.h
…
tilegx.c
…
timbuart.c
tty: serial: constify uart_ops structures
2016-09-02 15:01:16 +02:00
timbuart.h
…
uartlite.c
serial-uartlite: constify uart_ops structures
2016-09-02 15:01:16 +02:00
ucc_uart.c
QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
2016-05-01 13:55:12 -07:00
vr41xx_siu.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
vt8500_serial.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
xilinx_uartps.c
serial: xuartps: Enable uart loopback mode
2017-01-25 11:08:30 +01:00
zs.c
tty: serial: constify uart_ops structures
2017-01-27 09:23:36 +01:00
zs.h
…