linux/drivers/iio/imu
Greg Kroah-Hartman 75621ae307 2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
 
 Contains a large set of conversions from i2c probe() to probe_new()
 as part of an attempt to finally get rid of the old style probe().
 
 New devices support
 * adi,ad74115
   - New driver for this complex input/output device with 16 bit ADCs,
     14 bit DACs amongst other features.
   - A few tidy ups / removal of unused data patches followed.
 * adi,adf4377
   - New driver for this dual output integer-N phased locked loop and VCO
     chip.
 * maxim,max30208
   - New driver for this high accuracy digital temperature sensor.
 * st,lsm6dsx
   - Support for LSM6DS016IS (chip specific data)
   - Support for ISM330IS (id entry only)
 
 Minor cleanups etc
 * adi,adis
   - Fix a deadlock on device instance specific mutex.
   - Tidy up by calling unlocked form of __adis_initial_startup() in all
     cases and dropping the locked version.
 * adi,ad4130
   - Reference spi-peripehral-props.yaml in the dt-binding.
 * adi,ad74413r
   - Fix a bug brought on by integer promotion of signed value to unsigned type.
   - Add an spi_device_id table to allow module autoloading to work.
   - Add support for reset pin.
 * adi,ad7606_par
   - devm_platform_get_and_ioremap_resource() instead of opencoding.
 * adi,ad7923
   - Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
     for ad7924.
 * adi,ltc2983
   - Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
     unit.
 * maxim,max11410
   - Fix mask due to repeated use of VREFN instead of one of them being VREFP.
 * qcom,spmi-iadc
   - Add fallback compatibles to dt-binding.
 * renesas,rzg2l
   - Document use for RZ/Five SoC.
 * st,stm32-adc
   - Improved calibration support with error logging and a debugfs
     interface to read back the result.
 * ti,adc128s052
   - Fix an issue with missing data members in the adc128_of_match table that
     meant all device were being handled as adc128s052 ADCs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmOCXq8RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiLcBAArDMAWec2CUMnbiRqoXKnjuGy1ruTD2mA
 qQgmnR60koLxQ6Fhl9HDFpfqcQnKszCUGYyrhHhOwFBl1s7MdPrZ5yHWWJw4ie8w
 EyEPoRk9K8Qcc9anrl3IFjhjtrj/cY8FBLKkFDl9x5xaEkTeaNPLkjf8YPez3y0f
 YxdpwKWgxAxsS2xCEd4E4bHye2XLs4B3MXgb6buE2eHvNCrXUMSXuPMw33PbMym/
 sAqlNzr/Q+W28QSkzXjAhK3s8jd5KxavtAUMZROoUhBc0Wvw2Jln+pC2i/APMGTN
 Z6VkRk7wkRViwzcBFjkis+vnK1xFaPWHkjHQrS68IHhSjw6obYeNe2T/upWuJBQ+
 pGfUr2UwOAjLaqXE3vQjCae0AcS8Tf1Oa/ZMKAAyBcVsdZRdgIRx5qtxeHHWHWGJ
 XKZGeZohHPlCZkYqhTEvkJVknKDM1heQNh0e43P3GajprfSqoRvWUL6mbtAjYKNF
 TvHACNQ+ru8NdmC9c1dVEhZOnHZ82mnus5/fEFLsaeu/bxyvhablp3ANp++rqAPx
 UnCM4W3tWHZ/HjdsHN3PjaW0e53LUO8Yy01mktmVO4NsOoGl3X//uoRYPnQchFbs
 AStMr/ojGg2duZgwQm0JBva3wBlATdCEHKGRZ4fYoB7bXsHq6gzJCnBpjyRt1vRG
 kHpSBNiOvVk=
 =AUOr
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

2nd set of IIO new device support, cleanups etc for 6.2

Includes a few late breaking fixes for old issues.

Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().

New devices support
* adi,ad74115
  - New driver for this complex input/output device with 16 bit ADCs,
    14 bit DACs amongst other features.
  - A few tidy ups / removal of unused data patches followed.
* adi,adf4377
  - New driver for this dual output integer-N phased locked loop and VCO
    chip.
* maxim,max30208
  - New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
  - Support for LSM6DS016IS (chip specific data)
  - Support for ISM330IS (id entry only)

Minor cleanups etc
* adi,adis
  - Fix a deadlock on device instance specific mutex.
  - Tidy up by calling unlocked form of __adis_initial_startup() in all
    cases and dropping the locked version.
* adi,ad4130
  - Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
  - Fix a bug brought on by integer promotion of signed value to unsigned type.
  - Add an spi_device_id table to allow module autoloading to work.
  - Add support for reset pin.
* adi,ad7606_par
  - devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
  - Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
    for ad7924.
* adi,ltc2983
  - Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
    unit.
* maxim,max11410
  - Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
  - Add fallback compatibles to dt-binding.
* renesas,rzg2l
  - Document use for RZ/Five SoC.
* st,stm32-adc
  - Improved calibration support with error logging and a debugfs
    interface to read back the result.
* ti,adc128s052
  - Fix an issue with missing data members in the adc128_of_match table that
    meant all device were being handled as adc128s052 ADCs.

* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
  iio: addac: ad74413r: fix blank line after declaration warning
  iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
  dt-bindings: iio: imu: st_lsm6dsx: add ism330is
  iio: imu: st_lsm6dsx: add support to ISM330IS
  iio: frequency: adf4377: add support for ADF4377
  dt-bindings: iio: frequency: add adf4377 doc
  dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
  dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
  dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
  iio: adc128s052: add proper .data members in adc128_of_match table
  iio: adc: stm32-adc: add debugfs to read raw calibration result
  iio: adc: stm32-adc: improve calibration error log
  iio: adc: stm32-adc: smart calibration support
  iio: addac: ad74413r: add support for reset-gpio
  dt-bindings: iio: ad74413r: add optional reset-gpios
  iio: addac: ad74413r: add spi_device_id table
  dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
  iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
  iio: addac: add AD74115 driver
  ...
2022-11-27 14:40:05 +01:00
..
bmi160 iio: imu: bmi160/bmi160_i2c: Convert to i2c's .probe_new() 2022-11-23 20:01:42 +00:00
bno055 iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler() 2022-11-01 08:48:13 +00:00
inv_icm42600 iio: imu: inv_icm42600: Add support for icm42631 2022-11-23 19:58:45 +00:00
inv_mpu6050 iio: imu: inv_mpu6050: Convert to i2c's .probe_new() 2022-11-23 20:20:18 +00:00
st_lsm6dsx iio: imu: st_lsm6dsx: add support to ISM330IS 2022-11-24 19:23:23 +00:00
st_lsm9ds0 iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable() 2022-11-23 19:44:01 +00:00
adis16400.c iio: imu: adis16400: Call '__adis_initial_startup()' in probe 2022-11-23 20:37:51 +00:00
adis16460.c iio:imu:adis: Move exports into IIO_ADISLIB namespace 2022-02-18 11:42:26 +00:00
adis16475.c iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify 2022-08-15 22:30:03 +01:00
adis16480.c iio: imu: adis16480: Improve getting the optional clocks 2022-04-28 19:22:56 +01:00
adis_buffer.c iio:imu:adis: Move exports into IIO_ADISLIB namespace 2022-02-18 11:42:26 +00:00
adis_trigger.c iio:imu:adis: Move exports into IIO_ADISLIB namespace 2022-02-18 11:42:26 +00:00
adis.c iio: adis: add '__adis_enable_irq()' implementation 2022-11-23 20:37:50 +00:00
fxos8700_core.c iio: imu: fxos8700: Fix alignment for DMA safety 2022-06-14 11:53:18 +01:00
fxos8700_i2c.c iio: imu: fxos8700_i2c: Convert to i2c's .probe_new() 2022-11-23 20:01:42 +00:00
fxos8700_spi.c iio: imu: fxos8700: Drop unneeded explicit castings 2021-03-25 19:13:50 +00:00
fxos8700.h
Kconfig iio: imu: add Bosch Sensortec BNO055 core driver 2022-09-21 18:42:56 +01:00
kmx61.c iio: imu: kmx61: Convert to i2c's .probe_new() 2022-11-23 20:20:26 +00:00
Makefile iio: imu: add Bosch Sensortec BNO055 core driver 2022-09-21 18:42:56 +01:00