e238b68e6d
Move the base_cfg to struct sof_ipc4_gain_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
482 lines
15 KiB
C
482 lines
15 KiB
C
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
|
|
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* Copyright(c) 2022 Intel Corporation. All rights reserved.
|
|
*/
|
|
|
|
#ifndef __INCLUDE_SOUND_SOF_IPC4_TOPOLOGY_H__
|
|
#define __INCLUDE_SOUND_SOF_IPC4_TOPOLOGY_H__
|
|
|
|
#include <sound/sof/ipc4/header.h>
|
|
|
|
#define SOF_IPC4_FW_PAGE_SIZE BIT(12)
|
|
#define SOF_IPC4_FW_PAGE(x) ((((x) + BIT(12) - 1) & ~(BIT(12) - 1)) >> 12)
|
|
#define SOF_IPC4_FW_ROUNDUP(x) (((x) + BIT(6) - 1) & (~(BIT(6) - 1)))
|
|
|
|
#define SOF_IPC4_MODULE_LOAD_TYPE GENMASK(3, 0)
|
|
#define SOF_IPC4_MODULE_AUTO_START BIT(4)
|
|
/*
|
|
* Two module schedule domains in fw :
|
|
* LL domain - Low latency domain
|
|
* DP domain - Data processing domain
|
|
* The LL setting should be equal to !DP setting
|
|
*/
|
|
#define SOF_IPC4_MODULE_LL BIT(5)
|
|
#define SOF_IPC4_MODULE_DP BIT(6)
|
|
#define SOF_IPC4_MODULE_LIB_CODE BIT(7)
|
|
#define SOF_IPC4_MODULE_INIT_CONFIG_MASK GENMASK(11, 8)
|
|
|
|
#define SOF_IPC4_MODULE_INIT_CONFIG_TYPE_BASE_CFG 0
|
|
#define SOF_IPC4_MODULE_INIT_CONFIG_TYPE_BASE_CFG_WITH_EXT 1
|
|
|
|
#define SOF_IPC4_MODULE_INSTANCE_LIST_ITEM_SIZE 12
|
|
#define SOF_IPC4_PIPELINE_OBJECT_SIZE 448
|
|
#define SOF_IPC4_DATA_QUEUE_OBJECT_SIZE 128
|
|
#define SOF_IPC4_LL_TASK_OBJECT_SIZE 72
|
|
#define SOF_IPC4_DP_TASK_OBJECT_SIZE 104
|
|
#define SOF_IPC4_DP_TASK_LIST_SIZE (12 + 8)
|
|
#define SOF_IPC4_LL_TASK_LIST_ITEM_SIZE 12
|
|
#define SOF_IPC4_FW_MAX_PAGE_COUNT 20
|
|
#define SOF_IPC4_FW_MAX_QUEUE_COUNT 8
|
|
|
|
/* Node index and mask applicable for host copier and ALH/HDA type DAI copiers */
|
|
#define SOF_IPC4_NODE_INDEX_MASK 0xFF
|
|
#define SOF_IPC4_NODE_INDEX(x) ((x) & SOF_IPC4_NODE_INDEX_MASK)
|
|
#define SOF_IPC4_NODE_TYPE(x) ((x) << 8)
|
|
|
|
/* Node ID for SSP type DAI copiers */
|
|
#define SOF_IPC4_NODE_INDEX_INTEL_SSP(x) (((x) & 0xf) << 4)
|
|
|
|
/* Node ID for DMIC type DAI copiers */
|
|
#define SOF_IPC4_NODE_INDEX_INTEL_DMIC(x) ((x) & 0x7)
|
|
|
|
#define SOF_IPC4_GAIN_ALL_CHANNELS_MASK 0xffffffff
|
|
#define SOF_IPC4_VOL_ZERO_DB 0x7fffffff
|
|
|
|
#define SOF_IPC4_DMA_DEVICE_MAX_COUNT 16
|
|
|
|
#define SOF_IPC4_INVALID_NODE_ID 0xffffffff
|
|
|
|
/* FW requires minimum 2ms DMA buffer size */
|
|
#define SOF_IPC4_MIN_DMA_BUFFER_SIZE 2
|
|
|
|
/*
|
|
* The base of multi-gateways. Multi-gateways addressing starts from
|
|
* ALH_MULTI_GTW_BASE and there are ALH_MULTI_GTW_COUNT multi-sources
|
|
* and ALH_MULTI_GTW_COUNT multi-sinks available.
|
|
* Addressing is continuous from ALH_MULTI_GTW_BASE to
|
|
* ALH_MULTI_GTW_BASE + ALH_MULTI_GTW_COUNT - 1.
|
|
*/
|
|
#define ALH_MULTI_GTW_BASE 0x50
|
|
/* A magic number from FW */
|
|
#define ALH_MULTI_GTW_COUNT 8
|
|
|
|
enum sof_ipc4_copier_module_config_params {
|
|
/*
|
|
* Use LARGE_CONFIG_SET to initialize timestamp event. Ipc mailbox must
|
|
* contain properly built CopierConfigTimestampInitData struct.
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_PARAM_TIMESTAMP_INIT = 1,
|
|
/*
|
|
* Use LARGE_CONFIG_SET to initialize copier sink. Ipc mailbox must contain
|
|
* properly built CopierConfigSetSinkFormat struct.
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_PARAM_SET_SINK_FORMAT,
|
|
/*
|
|
* Use LARGE_CONFIG_SET to initialize and enable on Copier data segment
|
|
* event. Ipc mailbox must contain properly built DataSegmentEnabled struct.
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_PARAM_DATA_SEGMENT_ENABLED,
|
|
/*
|
|
* Use LARGE_CONFIG_GET to retrieve Linear Link Position (LLP) value for non
|
|
* HD-A gateways.
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_PARAM_LLP_READING,
|
|
/*
|
|
* Use LARGE_CONFIG_GET to retrieve Linear Link Position (LLP) value for non
|
|
* HD-A gateways and corresponding total processed data
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_PARAM_LLP_READING_EXTENDED,
|
|
/*
|
|
* Use LARGE_CONFIG_SET to setup attenuation on output pins. Data is just uint32_t.
|
|
* note Config is only allowed when output pin is set up for 32bit and source
|
|
* is connected to Gateway
|
|
*/
|
|
SOF_IPC4_COPIER_MODULE_CFG_ATTENUATION,
|
|
};
|
|
|
|
struct sof_ipc4_copier_config_set_sink_format {
|
|
/* Id of sink */
|
|
u32 sink_id;
|
|
/*
|
|
* Input format used by the source
|
|
* attention must be the same as present if already initialized.
|
|
*/
|
|
struct sof_ipc4_audio_format source_fmt;
|
|
/* Output format used by the sink */
|
|
struct sof_ipc4_audio_format sink_fmt;
|
|
} __packed __aligned(4);
|
|
|
|
/**
|
|
* struct sof_ipc4_pipeline - pipeline config data
|
|
* @priority: Priority of this pipeline
|
|
* @lp_mode: Low power mode
|
|
* @mem_usage: Memory usage
|
|
* @core_id: Target core for the pipeline
|
|
* @state: Pipeline state
|
|
* @use_chain_dma: flag to indicate if the firmware shall use chained DMA
|
|
* @msg: message structure for pipeline
|
|
* @skip_during_fe_trigger: skip triggering this pipeline during the FE DAI trigger
|
|
*/
|
|
struct sof_ipc4_pipeline {
|
|
uint32_t priority;
|
|
uint32_t lp_mode;
|
|
uint32_t mem_usage;
|
|
uint32_t core_id;
|
|
int state;
|
|
bool use_chain_dma;
|
|
struct sof_ipc4_msg msg;
|
|
bool skip_during_fe_trigger;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_multi_pipeline_data - multi pipeline trigger IPC data
|
|
* @count: Number of pipelines to be triggered
|
|
* @pipeline_instance_ids: Flexible array of IDs of the pipelines to be triggered
|
|
*/
|
|
struct ipc4_pipeline_set_state_data {
|
|
u32 count;
|
|
DECLARE_FLEX_ARRAY(u32, pipeline_instance_ids);
|
|
} __packed;
|
|
|
|
/**
|
|
* struct sof_ipc4_pin_format - Module pin format
|
|
* @pin_index: pin index
|
|
* @buffer_size: buffer size in bytes
|
|
* @audio_fmt: audio format for the pin
|
|
*
|
|
* This structure can be used for both output or input pins and the pin_index is relative to the
|
|
* pin type i.e output/input pin
|
|
*/
|
|
struct sof_ipc4_pin_format {
|
|
u32 pin_index;
|
|
u32 buffer_size;
|
|
struct sof_ipc4_audio_format audio_fmt;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_available_audio_format - Available audio formats
|
|
* @output_pin_fmts: Available output pin formats
|
|
* @input_pin_fmts: Available input pin formats
|
|
* @num_input_formats: Number of input pin formats
|
|
* @num_output_formats: Number of output pin formats
|
|
*/
|
|
struct sof_ipc4_available_audio_format {
|
|
struct sof_ipc4_pin_format *output_pin_fmts;
|
|
struct sof_ipc4_pin_format *input_pin_fmts;
|
|
u32 num_input_formats;
|
|
u32 num_output_formats;
|
|
};
|
|
|
|
/**
|
|
* struct sof_copier_gateway_cfg - IPC gateway configuration
|
|
* @node_id: ID of Gateway Node
|
|
* @dma_buffer_size: Preferred Gateway DMA buffer size (in bytes)
|
|
* @config_length: Length of gateway node configuration blob specified in #config_data
|
|
* config_data: Gateway node configuration blob
|
|
*/
|
|
struct sof_copier_gateway_cfg {
|
|
uint32_t node_id;
|
|
uint32_t dma_buffer_size;
|
|
uint32_t config_length;
|
|
uint32_t config_data[];
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_copier_data - IPC data for copier
|
|
* @base_config: Base configuration including input audio format
|
|
* @out_format: Output audio format
|
|
* @copier_feature_mask: Copier feature mask
|
|
* @gtw_cfg: Gateway configuration
|
|
*/
|
|
struct sof_ipc4_copier_data {
|
|
struct sof_ipc4_base_module_cfg base_config;
|
|
struct sof_ipc4_audio_format out_format;
|
|
uint32_t copier_feature_mask;
|
|
struct sof_copier_gateway_cfg gtw_cfg;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_gtw_attributes: Gateway attributes
|
|
* @lp_buffer_alloc: Gateway data requested in low power memory
|
|
* @alloc_from_reg_file: Gateway data requested in register file memory
|
|
* @rsvd: reserved for future use
|
|
*/
|
|
struct sof_ipc4_gtw_attributes {
|
|
uint32_t lp_buffer_alloc : 1;
|
|
uint32_t alloc_from_reg_file : 1;
|
|
uint32_t rsvd : 30;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_dma_device_stream_ch_map: abstract representation of
|
|
* channel mapping to DMAs
|
|
* @device: representation of hardware device address or FIFO
|
|
* @channel_mask: channels handled by @device. Channels are expected to be
|
|
* contiguous
|
|
*/
|
|
struct sof_ipc4_dma_device_stream_ch_map {
|
|
uint32_t device;
|
|
uint32_t channel_mask;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_dma_stream_ch_map: DMA configuration data
|
|
* @device_count: Number valid items in mapping array
|
|
* @mapping: device address and channel mask
|
|
*/
|
|
struct sof_ipc4_dma_stream_ch_map {
|
|
uint32_t device_count;
|
|
struct sof_ipc4_dma_device_stream_ch_map mapping[SOF_IPC4_DMA_DEVICE_MAX_COUNT];
|
|
} __packed;
|
|
|
|
#define SOF_IPC4_DMA_METHOD_HDA 1
|
|
#define SOF_IPC4_DMA_METHOD_GPDMA 2 /* defined for consistency but not used */
|
|
|
|
/**
|
|
* struct sof_ipc4_dma_config: DMA configuration
|
|
* @dma_method: HDAudio or GPDMA
|
|
* @pre_allocated_by_host: 1 if host driver allocates DMA channels, 0 otherwise
|
|
* @dma_channel_id: for HDaudio defined as @stream_id - 1
|
|
* @stream_id: HDaudio stream tag
|
|
* @dma_stream_channel_map: array of device/channel mappings
|
|
* @dma_priv_config_size: currently not used
|
|
* @dma_priv_config: currently not used
|
|
*/
|
|
struct sof_ipc4_dma_config {
|
|
uint8_t dma_method;
|
|
uint8_t pre_allocated_by_host;
|
|
uint16_t rsvd;
|
|
uint32_t dma_channel_id;
|
|
uint32_t stream_id;
|
|
struct sof_ipc4_dma_stream_ch_map dma_stream_channel_map;
|
|
uint32_t dma_priv_config_size;
|
|
uint8_t dma_priv_config[];
|
|
} __packed;
|
|
|
|
#define SOF_IPC4_GTW_DMA_CONFIG_ID 0x1000
|
|
|
|
/**
|
|
* struct sof_ipc4_dma_config: DMA configuration
|
|
* @type: set to SOF_IPC4_GTW_DMA_CONFIG_ID
|
|
* @length: sizeof(struct sof_ipc4_dma_config) + dma_config.dma_priv_config_size
|
|
* @dma_config: actual DMA configuration
|
|
*/
|
|
struct sof_ipc4_dma_config_tlv {
|
|
uint32_t type;
|
|
uint32_t length;
|
|
struct sof_ipc4_dma_config dma_config;
|
|
} __packed;
|
|
|
|
/** struct sof_ipc4_alh_configuration_blob: ALH blob
|
|
* @gw_attr: Gateway attributes
|
|
* @alh_cfg: ALH configuration data
|
|
*/
|
|
struct sof_ipc4_alh_configuration_blob {
|
|
struct sof_ipc4_gtw_attributes gw_attr;
|
|
struct sof_ipc4_dma_stream_ch_map alh_cfg;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_copier - copier config data
|
|
* @data: IPC copier data
|
|
* @copier_config: Copier + blob
|
|
* @ipc_config_size: Size of copier_config
|
|
* @available_fmt: Available audio format
|
|
* @frame_fmt: frame format
|
|
* @msg: message structure for copier
|
|
* @gtw_attr: Gateway attributes for copier blob
|
|
* @dai_type: DAI type
|
|
* @dai_index: DAI index
|
|
* @dma_config_tlv: DMA configuration
|
|
*/
|
|
struct sof_ipc4_copier {
|
|
struct sof_ipc4_copier_data data;
|
|
u32 *copier_config;
|
|
uint32_t ipc_config_size;
|
|
void *ipc_config_data;
|
|
struct sof_ipc4_available_audio_format available_fmt;
|
|
u32 frame_fmt;
|
|
struct sof_ipc4_msg msg;
|
|
struct sof_ipc4_gtw_attributes *gtw_attr;
|
|
u32 dai_type;
|
|
int dai_index;
|
|
struct sof_ipc4_dma_config_tlv dma_config_tlv;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_ctrl_value_chan: generic channel mapped value data
|
|
* @channel: Channel ID
|
|
* @value: Value associated with @channel
|
|
*/
|
|
struct sof_ipc4_ctrl_value_chan {
|
|
u32 channel;
|
|
u32 value;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_control_data - IPC data for kcontrol IO
|
|
* @msg: message structure for kcontrol IO
|
|
* @index: pipeline ID
|
|
* @chanv: channel ID and value array used by volume type controls
|
|
* @data: data for binary kcontrols
|
|
*/
|
|
struct sof_ipc4_control_data {
|
|
struct sof_ipc4_msg msg;
|
|
int index;
|
|
|
|
union {
|
|
DECLARE_FLEX_ARRAY(struct sof_ipc4_ctrl_value_chan, chanv);
|
|
DECLARE_FLEX_ARRAY(struct sof_abi_hdr, data);
|
|
};
|
|
};
|
|
|
|
#define SOF_IPC4_SWITCH_CONTROL_PARAM_ID 200
|
|
#define SOF_IPC4_ENUM_CONTROL_PARAM_ID 201
|
|
|
|
/**
|
|
* struct sof_ipc4_control_msg_payload - IPC payload for kcontrol parameters
|
|
* @id: unique id of the control
|
|
* @num_elems: Number of elements in the chanv array
|
|
* @reserved: reserved for future use, must be set to 0
|
|
* @chanv: channel ID and value array
|
|
*/
|
|
struct sof_ipc4_control_msg_payload {
|
|
uint16_t id;
|
|
uint16_t num_elems;
|
|
uint32_t reserved[4];
|
|
DECLARE_FLEX_ARRAY(struct sof_ipc4_ctrl_value_chan, chanv);
|
|
} __packed;
|
|
|
|
/**
|
|
* struct sof_ipc4_gain_params - IPC gain parameters
|
|
* @channels: Channels
|
|
* @init_val: Initial value
|
|
* @curve_type: Curve type
|
|
* @reserved: reserved for future use
|
|
* @curve_duration_l: Curve duration low part
|
|
* @curve_duration_h: Curve duration high part
|
|
*/
|
|
struct sof_ipc4_gain_params {
|
|
uint32_t channels;
|
|
uint32_t init_val;
|
|
uint32_t curve_type;
|
|
uint32_t reserved;
|
|
uint32_t curve_duration_l;
|
|
uint32_t curve_duration_h;
|
|
} __packed __aligned(4);
|
|
|
|
/**
|
|
* struct sof_ipc4_gain_data - IPC gain init blob
|
|
* @base_config: IPC base config data
|
|
* @params: Initial parameters for the gain module
|
|
*/
|
|
struct sof_ipc4_gain_data {
|
|
struct sof_ipc4_base_module_cfg base_config;
|
|
struct sof_ipc4_gain_params params;
|
|
} __packed __aligned(4);
|
|
|
|
/**
|
|
* struct sof_ipc4_gain - gain config data
|
|
* @data: IPC gain blob
|
|
* @available_fmt: Available audio format
|
|
* @msg: message structure for gain
|
|
*/
|
|
struct sof_ipc4_gain {
|
|
struct sof_ipc4_gain_data data;
|
|
struct sof_ipc4_available_audio_format available_fmt;
|
|
struct sof_ipc4_msg msg;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_mixer - mixer config data
|
|
* @base_config: IPC base config data
|
|
* @available_fmt: Available audio format
|
|
* @msg: IPC4 message struct containing header and data info
|
|
*/
|
|
struct sof_ipc4_mixer {
|
|
struct sof_ipc4_base_module_cfg base_config;
|
|
struct sof_ipc4_available_audio_format available_fmt;
|
|
struct sof_ipc4_msg msg;
|
|
};
|
|
|
|
/*
|
|
* struct sof_ipc4_src_data - IPC data for SRC
|
|
* @base_config: IPC base config data
|
|
* @sink_rate: Output rate for sink module
|
|
*/
|
|
struct sof_ipc4_src_data {
|
|
struct sof_ipc4_base_module_cfg base_config;
|
|
uint32_t sink_rate;
|
|
} __packed __aligned(4);
|
|
|
|
/**
|
|
* struct sof_ipc4_src - SRC config data
|
|
* @data: IPC base config data
|
|
* @available_fmt: Available audio format
|
|
* @msg: IPC4 message struct containing header and data info
|
|
*/
|
|
struct sof_ipc4_src {
|
|
struct sof_ipc4_src_data data;
|
|
struct sof_ipc4_available_audio_format available_fmt;
|
|
struct sof_ipc4_msg msg;
|
|
};
|
|
|
|
/**
|
|
* struct sof_ipc4_base_module_cfg_ext - base module config extension containing the pin format
|
|
* information for the module. Both @num_input_pin_fmts and @num_output_pin_fmts cannot be 0 for a
|
|
* module.
|
|
* @num_input_pin_fmts: number of input pin formats in the @pin_formats array
|
|
* @num_output_pin_fmts: number of output pin formats in the @pin_formats array
|
|
* @reserved: reserved for future use
|
|
* @pin_formats: flexible array consisting of @num_input_pin_fmts input pin format items followed
|
|
* by @num_output_pin_fmts output pin format items
|
|
*/
|
|
struct sof_ipc4_base_module_cfg_ext {
|
|
u16 num_input_pin_fmts;
|
|
u16 num_output_pin_fmts;
|
|
u8 reserved[12];
|
|
DECLARE_FLEX_ARRAY(struct sof_ipc4_pin_format, pin_formats);
|
|
} __packed;
|
|
|
|
/**
|
|
* struct sof_ipc4_process - process config data
|
|
* @base_config: IPC base config data
|
|
* @base_config_ext: Base config extension data for module init
|
|
* @output_format: Output audio format
|
|
* @available_fmt: Available audio format
|
|
* @ipc_config_data: Process module config data
|
|
* @ipc_config_size: Size of process module config data
|
|
* @msg: IPC4 message struct containing header and data info
|
|
* @base_config_ext_size: Size of the base config extension data in bytes
|
|
* @init_config: Module init config type (SOF_IPC4_MODULE_INIT_CONFIG_TYPE_*)
|
|
*/
|
|
struct sof_ipc4_process {
|
|
struct sof_ipc4_base_module_cfg base_config;
|
|
struct sof_ipc4_base_module_cfg_ext *base_config_ext;
|
|
struct sof_ipc4_audio_format output_format;
|
|
struct sof_ipc4_available_audio_format available_fmt;
|
|
void *ipc_config_data;
|
|
uint32_t ipc_config_size;
|
|
struct sof_ipc4_msg msg;
|
|
u32 base_config_ext_size;
|
|
u32 init_config;
|
|
};
|
|
|
|
bool sof_ipc4_copier_is_single_format(struct snd_sof_dev *sdev,
|
|
struct sof_ipc4_pin_format *pin_fmts,
|
|
u32 pin_fmts_size);
|
|
#endif
|