42e03b0d37
Add support to specify the VCC supply which is required to power the device. According the datasheet 7.3.1 Power Up, the device needs 1.5ms after the supply voltage reaches the operating range before the communcation can begin. Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20240219131114.134607-2-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
231 lines
5.5 KiB
C
231 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Digital temperature sensor with integrated Non-volatile memory
|
|
* Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com>
|
|
*
|
|
* Driver for the Texas Instruments TMP117 Temperature Sensor
|
|
* (7-bit I2C slave address (0x48 - 0x4B), changeable via ADD pins)
|
|
*
|
|
* Note: This driver assumes that the sensor has been calibrated beforehand.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#define TMP117_REG_TEMP 0x0
|
|
#define TMP117_REG_CFGR 0x1
|
|
#define TMP117_REG_HIGH_LIM 0x2
|
|
#define TMP117_REG_LOW_LIM 0x3
|
|
#define TMP117_REG_EEPROM_UL 0x4
|
|
#define TMP117_REG_EEPROM1 0x5
|
|
#define TMP117_REG_EEPROM2 0x6
|
|
#define TMP117_REG_TEMP_OFFSET 0x7
|
|
#define TMP117_REG_EEPROM3 0x8
|
|
#define TMP117_REG_DEVICE_ID 0xF
|
|
|
|
#define TMP117_RESOLUTION_10UC 78125
|
|
#define MICRODEGREE_PER_10MILLIDEGREE 10000
|
|
|
|
#define TMP116_DEVICE_ID 0x1116
|
|
#define TMP117_DEVICE_ID 0x0117
|
|
|
|
struct tmp117_data {
|
|
struct i2c_client *client;
|
|
s16 calibbias;
|
|
};
|
|
|
|
struct tmp11x_info {
|
|
const char *name;
|
|
struct iio_chan_spec const *channels;
|
|
int num_channels;
|
|
};
|
|
|
|
static int tmp117_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct tmp117_data *data = iio_priv(indio_dev);
|
|
s32 ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = i2c_smbus_read_word_swapped(data->client,
|
|
TMP117_REG_TEMP);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = sign_extend32(ret, 15);
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
ret = i2c_smbus_read_word_swapped(data->client,
|
|
TMP117_REG_TEMP_OFFSET);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = sign_extend32(ret, 15);
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/*
|
|
* Conversion from 10s of uC to mC
|
|
* as IIO reports temperature in mC
|
|
*/
|
|
*val = TMP117_RESOLUTION_10UC / MICRODEGREE_PER_10MILLIDEGREE;
|
|
*val2 = (TMP117_RESOLUTION_10UC %
|
|
MICRODEGREE_PER_10MILLIDEGREE) * 100;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int tmp117_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec
|
|
const *channel, int val, int val2, long mask)
|
|
{
|
|
struct tmp117_data *data = iio_priv(indio_dev);
|
|
s16 off;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
off = clamp_t(int, val, S16_MIN, S16_MAX);
|
|
if (off == data->calibbias)
|
|
return 0;
|
|
data->calibbias = off;
|
|
return i2c_smbus_write_word_swapped(data->client,
|
|
TMP117_REG_TEMP_OFFSET, off);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_chan_spec tmp117_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec tmp116_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
},
|
|
};
|
|
|
|
static const struct tmp11x_info tmp116_channels_info = {
|
|
.name = "tmp116",
|
|
.channels = tmp116_channels,
|
|
.num_channels = ARRAY_SIZE(tmp116_channels)
|
|
};
|
|
|
|
static const struct tmp11x_info tmp117_channels_info = {
|
|
.name = "tmp117",
|
|
.channels = tmp117_channels,
|
|
.num_channels = ARRAY_SIZE(tmp117_channels)
|
|
};
|
|
|
|
static const struct iio_info tmp117_info = {
|
|
.read_raw = tmp117_read_raw,
|
|
.write_raw = tmp117_write_raw,
|
|
};
|
|
|
|
static int tmp117_probe(struct i2c_client *client)
|
|
{
|
|
const struct tmp11x_info *match_data;
|
|
struct tmp117_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int dev_id;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = devm_regulator_get_enable(&client->dev, "vcc");
|
|
if (ret)
|
|
return ret;
|
|
|
|
fsleep(1500);
|
|
|
|
dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID);
|
|
if (dev_id < 0)
|
|
return dev_id;
|
|
|
|
switch (dev_id) {
|
|
case TMP116_DEVICE_ID:
|
|
match_data = &tmp116_channels_info;
|
|
break;
|
|
case TMP117_DEVICE_ID:
|
|
match_data = &tmp117_channels_info;
|
|
break;
|
|
default:
|
|
dev_info(&client->dev,
|
|
"Unknown device id (0x%x), use fallback compatible\n",
|
|
dev_id);
|
|
match_data = i2c_get_match_data(client);
|
|
}
|
|
|
|
if (!match_data)
|
|
return dev_err_probe(&client->dev, -ENODEV,
|
|
"Failed to identify unsupported device\n");
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
data->calibbias = 0;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &tmp117_info;
|
|
indio_dev->channels = match_data->channels;
|
|
indio_dev->num_channels = match_data->num_channels;
|
|
indio_dev->name = match_data->name;
|
|
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id tmp117_of_match[] = {
|
|
{ .compatible = "ti,tmp116", .data = &tmp116_channels_info },
|
|
{ .compatible = "ti,tmp117", .data = &tmp117_channels_info },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tmp117_of_match);
|
|
|
|
static const struct i2c_device_id tmp117_id[] = {
|
|
{ "tmp116", (kernel_ulong_t)&tmp116_channels_info },
|
|
{ "tmp117", (kernel_ulong_t)&tmp117_channels_info },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tmp117_id);
|
|
|
|
static struct i2c_driver tmp117_driver = {
|
|
.driver = {
|
|
.name = "tmp117",
|
|
.of_match_table = tmp117_of_match,
|
|
},
|
|
.probe = tmp117_probe,
|
|
.id_table = tmp117_id,
|
|
};
|
|
module_i2c_driver(tmp117_driver);
|
|
|
|
MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>");
|
|
MODULE_DESCRIPTION("TI TMP117 Temperature sensor driver");
|
|
MODULE_LICENSE("GPL");
|