Gidon Studinski 7be13fc3e6 wil6210: add support for enhanced DMA RX data flows
Enhanced DMA RX data path is handled using a single
RX descriptor ring for all VIFs.
Multiple RX status rings are supported, to allow RSS
and multi MSI support.
The driver gets the RX completions via the RX status rings.
The RX status message includes the completed RX buffer ID,
which points to the allocated SKB.

The enhanced DMA RX data flow supports RX chaining, where
multiple SKBs are merged into a single packet.

Enhanced DMA HW supports RX HW reorder offload, enabled by
default for Talyn-MB.

amsdu_en debugfs entry was added to allow control MSDU aggregation.
Use the following command to disable AMSDU (enabled by default):
echo 0 > amsdu_en

Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02 17:24:38 +03:00

658 lines
17 KiB
C

/*
* Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <linux/suspend.h>
#include "wil6210.h"
#include <linux/rtnetlink.h>
#include <linux/pm_runtime.h>
static bool use_msi = true;
module_param(use_msi, bool, 0444);
MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");
static bool ftm_mode;
module_param(ftm_mode, bool, 0444);
MODULE_PARM_DESC(ftm_mode, " Set factory test mode, default - false");
static int wil6210_pm_notify(struct notifier_block *notify_block,
unsigned long mode, void *unused);
static
int wil_set_capabilities(struct wil6210_priv *wil)
{
const char *wil_fw_name;
u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
RGF_USER_REVISION_ID_MASK);
int platform_capa;
struct fw_map *iccm_section, *sct;
bitmap_zero(wil->hw_capa, hw_capa_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
bitmap_zero(wil->platform_capa, WIL_PLATFORM_CAPA_MAX);
wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT :
WIL_FW_NAME_DEFAULT;
wil->chip_revision = chip_revision;
switch (jtag_id) {
case JTAG_DEV_ID_SPARROW:
memcpy(fw_mapping, sparrow_fw_mapping,
sizeof(sparrow_fw_mapping));
switch (chip_revision) {
case REVISION_ID_SPARROW_D0:
wil->hw_name = "Sparrow D0";
wil->hw_version = HW_VER_SPARROW_D0;
wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_SPARROW_PLUS :
WIL_FW_NAME_SPARROW_PLUS;
if (wil_fw_verify_file_exists(wil, wil_fw_name))
wil->wil_fw_name = wil_fw_name;
sct = wil_find_fw_mapping("mac_rgf_ext");
if (!sct) {
wil_err(wil, "mac_rgf_ext section not found in fw_mapping\n");
return -EINVAL;
}
memcpy(sct, &sparrow_d0_mac_rgf_ext, sizeof(*sct));
break;
case REVISION_ID_SPARROW_B0:
wil->hw_name = "Sparrow B0";
wil->hw_version = HW_VER_SPARROW_B0;
break;
default:
wil->hw_name = "Unknown";
wil->hw_version = HW_VER_UNKNOWN;
break;
}
wil->rgf_fw_assert_code_addr = SPARROW_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
break;
case JTAG_DEV_ID_TALYN:
wil->hw_name = "Talyn-MA";
wil->hw_version = HW_VER_TALYN;
memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
if (wil_r(wil, RGF_USER_OTP_HW_RD_MACHINE_1) &
BIT_NO_FLASH_INDICATION)
set_bit(hw_capa_no_flash, wil->hw_capa);
break;
case JTAG_DEV_ID_TALYN_MB:
wil->hw_name = "Talyn-MB";
wil->hw_version = HW_VER_TALYN_MB;
memcpy(fw_mapping, talyn_mb_fw_mapping,
sizeof(talyn_mb_fw_mapping));
wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
set_bit(hw_capa_no_flash, wil->hw_capa);
wil->use_enhanced_dma_hw = true;
wil->use_rx_hw_reordering = true;
break;
default:
wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
jtag_id, chip_revision);
wil->hw_name = "Unknown";
wil->hw_version = HW_VER_UNKNOWN;
return -EINVAL;
}
wil_init_txrx_ops(wil);
iccm_section = wil_find_fw_mapping("fw_code");
if (!iccm_section) {
wil_err(wil, "fw_code section not found in fw_mapping\n");
return -EINVAL;
}
wil->iccm_base = iccm_section->host;
wil_info(wil, "Board hardware is %s, flash %sexist\n", wil->hw_name,
test_bit(hw_capa_no_flash, wil->hw_capa) ? "doesn't " : "");
/* Get platform capabilities */
if (wil->platform_ops.get_capa) {
platform_capa =
wil->platform_ops.get_capa(wil->platform_handle);
memcpy(wil->platform_capa, &platform_capa,
min(sizeof(wil->platform_capa), sizeof(platform_capa)));
}
/* extract FW capabilities from file without loading the FW */
wil_request_firmware(wil, wil->wil_fw_name, false);
wil_refresh_fw_capabilities(wil);
return 0;
}
void wil_disable_irq(struct wil6210_priv *wil)
{
disable_irq(wil->pdev->irq);
}
void wil_enable_irq(struct wil6210_priv *wil)
{
enable_irq(wil->pdev->irq);
}
static void wil_remove_all_additional_vifs(struct wil6210_priv *wil)
{
struct wil6210_vif *vif;
int i;
for (i = 1; i < wil->max_vifs; i++) {
vif = wil->vifs[i];
if (vif) {
wil_vif_prepare_stop(vif);
wil_vif_remove(wil, vif->mid);
}
}
}
/* Bus ops */
static int wil_if_pcie_enable(struct wil6210_priv *wil)
{
struct pci_dev *pdev = wil->pdev;
int rc;
/* on platforms with buggy ACPI, pdev->msi_enabled may be set to
* allow pci_enable_device to work. This indicates INTx was not routed
* and only MSI should be used
*/
int msi_only = pdev->msi_enabled;
bool _use_msi = use_msi;
wil_dbg_misc(wil, "if_pcie_enable\n");
pci_set_master(pdev);
wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");
if (use_msi && pci_enable_msi(pdev)) {
wil_err(wil, "pci_enable_msi failed, use INTx\n");
_use_msi = false;
}
if (!_use_msi && msi_only) {
wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
rc = -ENODEV;
goto stop_master;
}
rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
if (rc)
goto stop_master;
/* need reset here to obtain MAC */
mutex_lock(&wil->mutex);
rc = wil_reset(wil, false);
mutex_unlock(&wil->mutex);
if (rc)
goto release_irq;
return 0;
release_irq:
wil6210_fini_irq(wil, pdev->irq);
/* safe to call if no MSI */
pci_disable_msi(pdev);
stop_master:
pci_clear_master(pdev);
return rc;
}
static int wil_if_pcie_disable(struct wil6210_priv *wil)
{
struct pci_dev *pdev = wil->pdev;
wil_dbg_misc(wil, "if_pcie_disable\n");
pci_clear_master(pdev);
/* disable and release IRQ */
wil6210_fini_irq(wil, pdev->irq);
/* safe to call if no MSI */
pci_disable_msi(pdev);
/* TODO: disable HW */
return 0;
}
static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size)
{
struct wil6210_priv *wil = wil_handle;
if (!wil)
return -EINVAL;
return wil_fw_copy_crash_dump(wil, buf, size);
}
static int wil_platform_rop_fw_recovery(void *wil_handle)
{
struct wil6210_priv *wil = wil_handle;
if (!wil)
return -EINVAL;
wil_fw_error_recovery(wil);
return 0;
}
static void wil_platform_ops_uninit(struct wil6210_priv *wil)
{
if (wil->platform_ops.uninit)
wil->platform_ops.uninit(wil->platform_handle);
memset(&wil->platform_ops, 0, sizeof(wil->platform_ops));
}
static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct wil6210_priv *wil;
struct device *dev = &pdev->dev;
int rc;
const struct wil_platform_rops rops = {
.ramdump = wil_platform_rop_ramdump,
.fw_recovery = wil_platform_rop_fw_recovery,
};
u32 bar_size = pci_resource_len(pdev, 0);
int dma_addr_size[] = {64, 48, 40, 32}; /* keep descending order */
int i, start_idx;
/* check HW */
dev_info(&pdev->dev, WIL_NAME
" device found [%04x:%04x] (rev %x) bar size 0x%x\n",
(int)pdev->vendor, (int)pdev->device, (int)pdev->revision,
bar_size);
if ((bar_size < WIL6210_MIN_MEM_SIZE) ||
(bar_size > WIL6210_MAX_MEM_SIZE)) {
dev_err(&pdev->dev, "Unexpected BAR0 size 0x%x\n",
bar_size);
return -ENODEV;
}
wil = wil_if_alloc(dev);
if (IS_ERR(wil)) {
rc = (int)PTR_ERR(wil);
dev_err(dev, "wil_if_alloc failed: %d\n", rc);
return rc;
}
wil->pdev = pdev;
pci_set_drvdata(pdev, wil);
wil->bar_size = bar_size;
/* rollback to if_free */
wil->platform_handle =
wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
if (!wil->platform_handle) {
rc = -ENODEV;
wil_err(wil, "wil_platform_init failed\n");
goto if_free;
}
/* rollback to err_plat */
rc = pci_enable_device(pdev);
if (rc && pdev->msi_enabled == 0) {
wil_err(wil,
"pci_enable_device failed, retry with MSI only\n");
/* Work around for platforms that can't allocate IRQ:
* retry with MSI only
*/
pdev->msi_enabled = 1;
rc = pci_enable_device(pdev);
}
if (rc) {
wil_err(wil,
"pci_enable_device failed, even with MSI only\n");
goto err_plat;
}
/* rollback to err_disable_pdev */
pci_set_power_state(pdev, PCI_D0);
rc = pci_request_region(pdev, 0, WIL_NAME);
if (rc) {
wil_err(wil, "pci_request_region failed\n");
goto err_disable_pdev;
}
/* rollback to err_release_reg */
wil->csr = pci_ioremap_bar(pdev, 0);
if (!wil->csr) {
wil_err(wil, "pci_ioremap_bar failed\n");
rc = -ENODEV;
goto err_release_reg;
}
/* rollback to err_iounmap */
wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
rc = wil_set_capabilities(wil);
if (rc) {
wil_err(wil, "wil_set_capabilities failed, rc %d\n", rc);
goto err_iounmap;
}
/* device supports >32bit addresses.
* for legacy DMA start from 48 bit.
*/
start_idx = wil->use_enhanced_dma_hw ? 0 : 1;
for (i = start_idx; i < ARRAY_SIZE(dma_addr_size); i++) {
rc = dma_set_mask_and_coherent(dev,
DMA_BIT_MASK(dma_addr_size[i]));
if (rc) {
dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n",
dma_addr_size[i], rc);
continue;
}
dev_info(dev, "using dma mask %d", dma_addr_size[i]);
wil->dma_addr_size = dma_addr_size[i];
break;
}
if (wil->dma_addr_size == 0)
goto err_iounmap;
wil6210_clear_irq(wil);
/* FW should raise IRQ when ready */
rc = wil_if_pcie_enable(wil);
if (rc) {
wil_err(wil, "Enable device failed\n");
goto err_iounmap;
}
/* rollback to bus_disable */
rc = wil_if_add(wil);
if (rc) {
wil_err(wil, "wil_if_add failed: %d\n", rc);
goto bus_disable;
}
/* in case of WMI-only FW, perform full reset and FW loading */
if (test_bit(WMI_FW_CAPABILITY_WMI_ONLY, wil->fw_capabilities)) {
wil_dbg_misc(wil, "Loading WMI only FW\n");
mutex_lock(&wil->mutex);
rc = wil_reset(wil, true);
mutex_unlock(&wil->mutex);
if (rc) {
wil_err(wil, "failed to load WMI only FW\n");
goto if_remove;
}
}
if (IS_ENABLED(CONFIG_PM))
wil->pm_notify.notifier_call = wil6210_pm_notify;
rc = register_pm_notifier(&wil->pm_notify);
if (rc)
/* Do not fail the driver initialization, as suspend can
* be prevented in a later phase if needed
*/
wil_err(wil, "register_pm_notifier failed: %d\n", rc);
wil6210_debugfs_init(wil);
wil_pm_runtime_allow(wil);
return 0;
if_remove:
wil_if_remove(wil);
bus_disable:
wil_if_pcie_disable(wil);
err_iounmap:
pci_iounmap(pdev, wil->csr);
err_release_reg:
pci_release_region(pdev, 0);
err_disable_pdev:
pci_disable_device(pdev);
err_plat:
wil_platform_ops_uninit(wil);
if_free:
wil_if_free(wil);
return rc;
}
static void wil_pcie_remove(struct pci_dev *pdev)
{
struct wil6210_priv *wil = pci_get_drvdata(pdev);
void __iomem *csr = wil->csr;
wil_dbg_misc(wil, "pcie_remove\n");
unregister_pm_notifier(&wil->pm_notify);
wil_pm_runtime_forbid(wil);
wil6210_debugfs_remove(wil);
rtnl_lock();
wil_p2p_wdev_free(wil);
wil_remove_all_additional_vifs(wil);
rtnl_unlock();
wil_if_remove(wil);
wil_if_pcie_disable(wil);
pci_iounmap(pdev, csr);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
wil_platform_ops_uninit(wil);
wil_if_free(wil);
}
static const struct pci_device_id wil6210_pcie_ids[] = {
{ PCI_DEVICE(0x1ae9, 0x0310) },
{ PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
{ PCI_DEVICE(0x17cb, 0x1201) }, /* Talyn */
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
static int wil6210_suspend(struct device *dev, bool is_runtime)
{
int rc = 0;
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
bool keep_radio_on, active_ifaces;
wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system");
mutex_lock(&wil->vif_mutex);
active_ifaces = wil_has_active_ifaces(wil, true, false);
mutex_unlock(&wil->vif_mutex);
keep_radio_on = active_ifaces && wil->keep_radio_on_during_sleep;
rc = wil_can_suspend(wil, is_runtime);
if (rc)
goto out;
rc = wil_suspend(wil, is_runtime, keep_radio_on);
if (!rc) {
/* In case radio stays on, platform device will control
* PCIe master
*/
if (!keep_radio_on) {
/* disable bus mastering */
pci_clear_master(pdev);
wil->suspend_stats.r_off.successful_suspends++;
} else {
wil->suspend_stats.r_on.successful_suspends++;
}
}
out:
return rc;
}
static int wil6210_resume(struct device *dev, bool is_runtime)
{
int rc = 0;
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
bool keep_radio_on, active_ifaces;
wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system");
mutex_lock(&wil->vif_mutex);
active_ifaces = wil_has_active_ifaces(wil, true, false);
mutex_unlock(&wil->vif_mutex);
keep_radio_on = active_ifaces && wil->keep_radio_on_during_sleep;
/* In case radio stays on, platform device will control
* PCIe master
*/
if (!keep_radio_on)
/* allow master */
pci_set_master(pdev);
rc = wil_resume(wil, is_runtime, keep_radio_on);
if (rc) {
wil_err(wil, "device failed to resume (%d)\n", rc);
if (!keep_radio_on) {
pci_clear_master(pdev);
wil->suspend_stats.r_off.failed_resumes++;
} else {
wil->suspend_stats.r_on.failed_resumes++;
}
} else {
if (keep_radio_on)
wil->suspend_stats.r_on.successful_resumes++;
else
wil->suspend_stats.r_off.successful_resumes++;
}
return rc;
}
static int wil6210_pm_notify(struct notifier_block *notify_block,
unsigned long mode, void *unused)
{
struct wil6210_priv *wil = container_of(
notify_block, struct wil6210_priv, pm_notify);
int rc = 0;
enum wil_platform_event evt;
wil_dbg_pm(wil, "pm_notify: mode (%ld)\n", mode);
switch (mode) {
case PM_HIBERNATION_PREPARE:
case PM_SUSPEND_PREPARE:
case PM_RESTORE_PREPARE:
rc = wil_can_suspend(wil, false);
if (rc)
break;
evt = WIL_PLATFORM_EVT_PRE_SUSPEND;
if (wil->platform_ops.notify)
rc = wil->platform_ops.notify(wil->platform_handle,
evt);
break;
case PM_POST_SUSPEND:
case PM_POST_HIBERNATION:
case PM_POST_RESTORE:
evt = WIL_PLATFORM_EVT_POST_SUSPEND;
if (wil->platform_ops.notify)
rc = wil->platform_ops.notify(wil->platform_handle,
evt);
break;
default:
wil_dbg_pm(wil, "unhandled notify mode %ld\n", mode);
break;
}
wil_dbg_pm(wil, "notification mode %ld: rc (%d)\n", mode, rc);
return rc;
}
static int __maybe_unused wil6210_pm_suspend(struct device *dev)
{
return wil6210_suspend(dev, false);
}
static int __maybe_unused wil6210_pm_resume(struct device *dev)
{
return wil6210_resume(dev, false);
}
static int __maybe_unused wil6210_pm_runtime_idle(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
wil_dbg_pm(wil, "Runtime idle\n");
return wil_can_suspend(wil, true);
}
static int __maybe_unused wil6210_pm_runtime_resume(struct device *dev)
{
return wil6210_resume(dev, true);
}
static int __maybe_unused wil6210_pm_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
if (test_bit(wil_status_suspended, wil->status)) {
wil_dbg_pm(wil, "trying to suspend while suspended\n");
return 1;
}
return wil6210_suspend(dev, true);
}
static const struct dev_pm_ops wil6210_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
SET_RUNTIME_PM_OPS(wil6210_pm_runtime_suspend,
wil6210_pm_runtime_resume,
wil6210_pm_runtime_idle)
};
static struct pci_driver wil6210_driver = {
.probe = wil_pcie_probe,
.remove = wil_pcie_remove,
.id_table = wil6210_pcie_ids,
.name = WIL_NAME,
.driver = {
.pm = &wil6210_pm_ops,
},
};
static int __init wil6210_driver_init(void)
{
int rc;
rc = wil_platform_modinit();
if (rc)
return rc;
rc = pci_register_driver(&wil6210_driver);
if (rc)
wil_platform_modexit();
return rc;
}
module_init(wil6210_driver_init);
static void __exit wil6210_driver_exit(void)
{
pci_unregister_driver(&wil6210_driver);
wil_platform_modexit();
}
module_exit(wil6210_driver_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");