Seungwon Jeon 1f44a2a557 mmc: dw_mmc: set the supported max/min frequency
Both f_max and f_min will be informed for core layer to request
valid clock rate. But current setting from 'host->bus_hz' may
not represent the max/min frequency properly. Even if host can
actually support high speed than bus_hz, core layer will not
request clock rate over bus_hz. Basically, f_max/f_min can be set
with the values according to spec. And then host will make its best
effort to meet the rate.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:34:12 -04:00
..
2013-09-06 13:30:06 -07:00
2013-09-25 15:50:53 -07:00
2013-09-13 15:09:52 +02:00
2013-09-03 11:37:15 -07:00
2013-09-13 15:09:52 +02:00
2013-09-24 09:41:18 -07:00
2013-09-13 15:09:52 +02:00
2013-09-12 11:29:26 -07:00
2013-09-09 16:35:29 -07:00
2013-09-25 15:12:46 -07:00
2013-09-06 13:30:06 -07:00
2013-09-13 15:09:52 +02:00
2013-09-13 15:09:52 +02:00
2013-09-13 15:09:52 +02:00
2013-09-06 13:21:16 -07:00
2013-09-11 15:59:15 -07:00
2013-09-13 15:09:52 +02:00
2013-09-03 11:37:15 -07:00
2013-09-17 13:00:43 -07:00
2013-08-19 17:08:16 -07:00
2013-09-04 11:28:04 -06:00
2013-09-17 22:56:09 +03:00
2013-09-11 19:55:12 -07:00
2013-09-13 15:09:52 +02:00
2013-09-25 15:50:53 -07:00