Don Skidmore 1f86c983be ixgbe: fix to use correct timeout interval for memory read completion ...

Currently we were just always polling for a hard coded 80 ms and not
respecting the system-wide timeout interval.  Since up until now all
devices have been tested with this 80ms value we continue to use this
value as a hard minimum.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2014-02-28 12:40:56 -05:00

..

ixgbe_82598.c

ixgbe: add support for quad-port x520 adapter

2013-07-31 02:26:15 -07:00

ixgbe_82599.c

ixgbe: Fix incorrect logic for fixed fiber eeprom write

2014-01-16 15:34:25 -08:00

ixgbe_common.c

ixgbe: fix to use correct timeout interval for memory read completion

2014-02-28 12:40:56 -05:00

ixgbe_common.h

ixgbe: Check for adapter removal on register writes

2014-01-14 18:59:17 -08:00

ixgbe_dcb_82598.c

ixgbe: Fix Tx Hang issue with lldpad on 82598EB

2013-07-28 13:17:17 -07:00

ixgbe_dcb_82598.h

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00

ixgbe_dcb_82599.c

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00

ixgbe_dcb_82599.h

IXGBE: Set the SW prio_tc values at initialization to the HW setting.

2013-05-21 03:14:21 -07:00

ixgbe_dcb_nl.c

IXGBE: Set the SW prio_tc values at initialization to the HW setting.

2013-05-21 03:14:21 -07:00

ixgbe_dcb.c

IXGBE: Set the SW prio_tc values at initialization to the HW setting.

2013-05-21 03:14:21 -07:00

ixgbe_dcb.h

IXGBE: Set the SW prio_tc values at initialization to the HW setting.

2013-05-21 03:14:21 -07:00

ixgbe_debugfs.c

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00

ixgbe_ethtool.c

ixgbe: Additional adapter removal checks

2014-01-14 18:59:17 -08:00

ixgbe_fcoe.c

drivers: net: Remove remaining alloc/OOM messages

2013-02-08 17:44:39 -05:00

ixgbe_fcoe.h

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00

ixgbe_lib.c

ixgbe: Use pci_enable_msix_range() instead of pci_enable_msix()

2014-02-18 15:33:31 -05:00

ixgbe_main.c

ixgbe: Add WoL support for a new device

2014-02-26 15:54:52 -05:00

ixgbe_mbx.c

ixgbe: Check for adapter removal on register writes

2014-01-14 18:59:17 -08:00

ixgbe_mbx.h

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00

ixgbe_phy.c

ixgbe: Check for adapter removal on register writes

2014-01-14 18:59:17 -08:00

ixgbe_phy.h

ixgbe: Make ixgbe_identify_qsfp_module_generic static

2013-11-30 00:21:47 -08:00

ixgbe_ptp.c

ixgbe: don't use magic size number to assign ptp_caps.name

2014-02-26 15:54:51 -05:00

ixgbe_sriov.c

ixgbe: define IXGBE_MAX_VFS_DRV_LIMIT macro and cleanup const 63

2014-01-17 18:37:31 -08:00

ixgbe_sriov.h

ixgbe: define IXGBE_MAX_VFS_DRV_LIMIT macro and cleanup const 63

2014-01-17 18:37:31 -08:00

ixgbe_sysfs.c

ixgbe: Start temperature sensor attribute index with 1

2013-12-17 22:43:07 -08:00

ixgbe_type.h

ixgbe: fix to use correct timeout interval for memory read completion

2014-02-28 12:40:56 -05:00

ixgbe_x540.c

ixgbe: Cleanup the use of tabs and spaces

2013-10-01 12:49:49 -04:00

ixgbe.h

ixgbe: add braces around else condition in ixgbe_qv_lock_* calls

2014-01-17 18:56:59 -08:00

Makefile

ixgbe: update date to 2013

2013-02-05 01:44:13 -08:00