iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/boot/dts/keystone.dtsi
Serge Semin 091584182b arm: dts: keystone: Harmonize DWC USB3 DT nodes name 
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-24 20:50:48 -08:00

355 lines
9.3 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ti,keystone";
model = "Texas Instruments Keystone 2 SoC";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
spi0 = &spi0;
spi1 = &spi1;
spi2 = &spi2;
};
chosen { };
memory: memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};
gic: interrupt-controller@2561000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
<0x0 0x02564000 0x0 0x2000>,
<0x0 0x02566000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv7-timer";
interrupts =
<GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a15-pmu";
interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
};
psci {
compatible = "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
cpu_on = <0x84000003>;
};
soc0: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,keystone","simple-bus";
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
pllctrl: pll-controller@2310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};
psc: power-sleep-controller@2350000 {
compatible = "syscon", "simple-mfd";
reg = <0x02350000 0x1000>;
};
devctrl: device-state-control@2620000 {
compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
reg = <0x02620000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x02620000 0x1000>;
kirq0: keystone_irq@2a0 {
compatible = "ti,keystone-irq";
reg = <0x2a0 0x4>;
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <1>;
ti,syscon-dev = <&devctrl 0x2a0>;
};
rstctrl: reset-controller@328 {
compatible = "ti,keystone-reset";
reg = <0x328 0x10>;
ti,syscon-pll = <&pllctrl 0xe4>;
ti,syscon-dev = <&devctrl 0x328>;
ti,wdt-list = <0>;
};
};
/include/ "keystone-clocks.dtsi"
uart0: serial@2530c00 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02530c00 0x100>;
clocks = <&clkuart0>;
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
};
uart1: serial@2531000 {
compatible = "ti,da830-uart", "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02531000 0x100>;
clocks = <&clkuart1>;
interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
};
i2c0: i2c@2530000 {
compatible = "ti,davinci-i2c";
reg = <0x02530000 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@2530400 {
compatible = "ti,davinci-i2c";
reg = <0x02530400 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@2530800 {
compatible = "ti,davinci-i2c";
reg = <0x02530800 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@21000400 {
compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000400 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@21000600 {
compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000600 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
spi2: spi@21000800 {
compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000800 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
#address-cells = <1>;
#size-cells = <0>;
};
usb_phy: usb_phy@2620738 {
compatible = "ti,keystone-usbphy";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2620738 24>;
status = "disabled";
};
keystone_usb0: usb@2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2680000 0x10000>;
clocks = <&clkusb>;
clock-names = "usb";
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
ranges;
dma-coherent;
dma-ranges;
status = "disabled";
usb0: usb@2690000 {
compatible = "snps,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
usb-phy = <&usb_phy>, <&usb_phy>;
};
};
wdt: wdt@22f0080 {
compatible = "ti,keystone-wdt","ti,davinci-wdt";
reg = <0x022f0080 0x80>;
clocks = <&clkwdtimer0>;
};
clock_event: timer@22f0000 {
compatible = "ti,keystone-timer";
reg = <0x022f0000 0x80>;
interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
clocks = <&clktimer15>;
};
gpio0: gpio@260bf00 {
compatible = "ti,keystone-gpio";
reg = <0x0260bf00 0x100>;
gpio-controller;
#gpio-cells = <2>;
/* HW Interrupts mapped to GPIO pins */
interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkgpio>;
clock-names = "gpio";
ti,ngpio = <32>;
ti,davinci-gpio-unbanked = <32>;
};
aemif: aemif@21000A00 {
compatible = "ti,keystone-aemif", "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
clocks = <&clkaemif>;
clock-names = "aemif";
clock-ranges;
reg = <0x21000A00 0x00000100>;
ranges = <0 0 0x30000000 0x10000000
1 0 0x21000A00 0x00000100>;
};
pcie0: pcie@21800000 {
compatible = "ti,keystone-pcie", "snps,dw-pcie";
clocks = <&clkpcie>;
clock-names = "pcie";
#address-cells = <3>;
#size-cells = <2>;
reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
ranges = <0x82000000 0 0x50000000 0x50000000
0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;
bus-range = <0x00 0xff>;
/* error interrupt */
interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
<0 0 0 2 &pcie_intc0 1>, /* INT B */
<0 0 0 3 &pcie_intc0 2>, /* INT C */
<0 0 0 4 &pcie_intc0 3>; /* INT D */
pcie_msi_intc0: msi-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
};
pcie_intc0: legacy-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
};
};
emif: emif@21010000 {
compatible = "ti,emif-keystone";
reg = <0x21010000 0x200>;
interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink