Zhangfei Gao 6e14a5eeb1 net: phy: resume phydev when going to RESUMING ...

With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going
to HALTED"), an unused PHY device will be put in a low-power mode
using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start()
and phy_stop() from ndo_open and ndo_close() respectively, while
calling phy_connect() and phy_disconnect() from probe and remove.
In such a case, the PHY will be powered down during the phy_stop()
call, but will fail to be powered up in phy_start().
This patch fixes this scenario.

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2014-05-16 15:17:58 -04:00

..

amd.c

phylib: Support registering a bunch of drivers

2012-07-09 00:10:56 -07:00

at803x.c

phy/at8031: enable at8031 to work on interrupt mode

2014-03-29 18:20:30 -04:00

bcm7xxx.c

net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER

2014-03-26 16:19:24 -04:00

bcm63xx.c

phy: bcm63xx: report Broadcom BCM63xx PHYs as internal

2013-05-27 22:42:50 -07:00

bcm87xx.c

net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver

2012-09-22 15:33:46 -04:00

broadcom.c

net: phy: broadcom: extract register definitions

2014-02-14 00:27:58 -05:00

cicada.c

net: phy: cicada: fix checkpath errors

2013-12-18 00:49:01 -05:00

davicom.c

net: phy: davicom: fix checkpath errors

2013-12-18 00:49:01 -05:00

dp83640_reg.h

ptp: Added a clock driver for the National Semiconductor PHYTER.

2011-05-23 13:10:23 -07:00

dp83640.c

net: ptp: move PTP classifier in its own file

2014-04-01 16:43:18 -04:00

et1011c.c

…

fixed.c

phy: Use pr_<level>

2012-06-11 16:58:24 -07:00

icplus.c

net: phy: icplus: fix checkpath error

2013-12-18 00:49:02 -05:00

Kconfig

net: phy: add Broadcom BCM7xxx internal PHY driver

2014-02-14 00:27:58 -05:00

lxt.c

net: phy: lxt: fix checkpath errors

2013-12-18 00:49:02 -05:00

Makefile

net: phy: add Broadcom BCM7xxx internal PHY driver

2014-02-14 00:27:58 -05:00

marvell.c

net: phy: marvell: provide genphy suspend/resume

2013-12-17 14:42:44 -05:00

mdio_bus.c

net: phy: expose phydev->has_fixups to sysfs

2014-02-12 19:08:49 -05:00

mdio-bitbang.c

Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"

2012-11-14 22:32:15 -05:00

mdio-gpio.c

net: mdio-gpio: warn about missing bus alias id

2014-05-09 15:51:19 -04:00

mdio-moxart.c

drivers/net: delete non-required instances of include <linux/init.h>

2014-01-16 11:53:26 -08:00

mdio-mux-gpio.c

drivers/net: delete non-required instances of include <linux/init.h>

2014-01-16 11:53:26 -08:00

mdio-mux-mmioreg.c

drivers/net: delete non-required instances of include <linux/init.h>

2014-01-16 11:53:26 -08:00

mdio-mux.c

netdev/phy: skip disabled mdio-mux nodes

2012-08-20 02:16:00 -07:00

mdio-octeon.c

drivers/net: delete non-required instances of include <linux/init.h>

2014-01-16 11:53:26 -08:00

mdio-sun4i.c

net: sun4i: remove empty MDIO bus reset function

2014-03-28 01:38:02 -04:00

micrel.c

net/phy: micrel: fix bugged test on device tree loading for ksz9021

2014-04-23 14:58:58 -04:00

national.c

phy: Use pr_<level>

2012-06-11 16:58:24 -07:00

phy_device.c

net: phy: Don't call phy_resume if phy_init_hw failed

2014-05-15 22:56:43 -04:00

phy.c

net: phy: resume phydev when going to RESUMING

2014-05-16 15:17:58 -04:00

qsemi.c

…

realtek.c

PHY: Add RTL8201CP phy_driver to realtek

2013-11-11 14:05:03 -05:00

smsc.c

net: phy: smsc: Fix config_init typo

2012-12-07 14:26:15 -05:00

spi_ks8995.c

net: Micrel KSZ8864RMN 4-port managed switch support

2014-04-03 16:15:29 -04:00

ste10Xp.c

phylib: Support registering a bunch of drivers

2012-07-09 00:10:56 -07:00

vitesse.c

phy: Add Vitesse 8514 phy ID

2013-11-28 18:30:54 -05:00