4705b2e804
This patch is V2 of the MMCIF romImage boot support for sh7724 and the Ecovec board. With this patch applied and CONFIG_ROMIMAGE_MMCIF selected the romImage kernel image can be written to a MMC card and booted directly by the sh7724 cpu. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
73 lines
2.0 KiB
C
73 lines
2.0 KiB
C
/*
|
|
* sh7724 MMCIF loader
|
|
*
|
|
* Copyright (C) 2010 Magnus Damm
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/mmc/sh_mmcif.h>
|
|
#include <mach/romimage.h>
|
|
|
|
#define MMCIF_BASE (void __iomem *)0xa4ca0000
|
|
|
|
#define MSTPCR2 0xa4150038
|
|
#define PTWCR 0xa4050146
|
|
#define PTXCR 0xa4050148
|
|
#define PSELA 0xa405014e
|
|
#define PSELE 0xa4050156
|
|
#define HIZCRC 0xa405015c
|
|
#define DRVCRA 0xa405018a
|
|
|
|
enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
|
|
MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
|
|
|
|
/* SH7724 specific MMCIF loader
|
|
*
|
|
* loads the romImage from an MMC card starting from block 512
|
|
* use the following line to write the romImage to an MMC card
|
|
* # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
|
|
*/
|
|
asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
|
|
{
|
|
mmcif_update_progress(MMCIF_PROGRESS_ENTER);
|
|
|
|
/* enable clock to the MMCIF hardware block */
|
|
__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
|
|
|
|
/* setup pins D7-D0 */
|
|
__raw_writew(0x0000, PTWCR);
|
|
|
|
/* setup pins MMC_CLK, MMC_CMD */
|
|
__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
|
|
|
|
/* select D3-D0 pin function */
|
|
__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
|
|
|
|
/* select D7-D4 pin function */
|
|
__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
|
|
|
|
/* disable Hi-Z for the MMC pins */
|
|
__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
|
|
|
|
/* high drive capability for MMC pins */
|
|
__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
|
|
|
|
mmcif_update_progress(MMCIF_PROGRESS_INIT);
|
|
|
|
/* setup MMCIF hardware */
|
|
sh_mmcif_boot_init(MMCIF_BASE);
|
|
|
|
mmcif_update_progress(MMCIF_PROGRESS_LOAD);
|
|
|
|
/* load kernel via MMCIF interface */
|
|
sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
|
|
|
|
/* disable clock to the MMCIF hardware block */
|
|
__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
|
|
|
|
mmcif_update_progress(MMCIF_PROGRESS_DONE);
|
|
}
|