Abhishek Ambure 6ddc3860a5 ath10k: add support for ack rssi value of data tx packets
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that
the firmware has the capability to send the RSSI value of the ACK for all
data and management packets transmitted.

If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware
sends RSSI value in "data" tx completion event. Host extracts ack rssi
values of data packets from their tx completion event.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26 14:58:06 +02:00

1160 lines
32 KiB
C

// SPDX-License-Identifier: ISC
/*
* Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
*/
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/bitfield.h>
#include "core.h"
#include "hw.h"
#include "hif.h"
#include "wmi-ops.h"
#include "bmi.h"
const struct ath10k_hw_regs qca988x_regs = {
.rtc_soc_base_address = 0x00004000,
.rtc_wmac_base_address = 0x00005000,
.soc_core_base_address = 0x00009000,
.wlan_mac_base_address = 0x00020000,
.ce_wrapper_base_address = 0x00057000,
.ce0_base_address = 0x00057400,
.ce1_base_address = 0x00057800,
.ce2_base_address = 0x00057c00,
.ce3_base_address = 0x00058000,
.ce4_base_address = 0x00058400,
.ce5_base_address = 0x00058800,
.ce6_base_address = 0x00058c00,
.ce7_base_address = 0x00059000,
.soc_reset_control_si0_rst_mask = 0x00000001,
.soc_reset_control_ce_rst_mask = 0x00040000,
.soc_chip_id_address = 0x000000ec,
.scratch_3_address = 0x00000030,
.fw_indicator_address = 0x00009030,
.pcie_local_base_address = 0x00080000,
.ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
.ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
.pcie_intr_fw_mask = 0x00000400,
.pcie_intr_ce_mask_all = 0x0007f800,
.pcie_intr_clr_address = 0x00000014,
};
const struct ath10k_hw_regs qca6174_regs = {
.rtc_soc_base_address = 0x00000800,
.rtc_wmac_base_address = 0x00001000,
.soc_core_base_address = 0x0003a000,
.wlan_mac_base_address = 0x00010000,
.ce_wrapper_base_address = 0x00034000,
.ce0_base_address = 0x00034400,
.ce1_base_address = 0x00034800,
.ce2_base_address = 0x00034c00,
.ce3_base_address = 0x00035000,
.ce4_base_address = 0x00035400,
.ce5_base_address = 0x00035800,
.ce6_base_address = 0x00035c00,
.ce7_base_address = 0x00036000,
.soc_reset_control_si0_rst_mask = 0x00000000,
.soc_reset_control_ce_rst_mask = 0x00000001,
.soc_chip_id_address = 0x000000f0,
.scratch_3_address = 0x00000028,
.fw_indicator_address = 0x0003a028,
.pcie_local_base_address = 0x00080000,
.ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
.ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
.pcie_intr_fw_mask = 0x00000400,
.pcie_intr_ce_mask_all = 0x0007f800,
.pcie_intr_clr_address = 0x00000014,
.cpu_pll_init_address = 0x00404020,
.cpu_speed_address = 0x00404024,
.core_clk_div_address = 0x00404028,
};
const struct ath10k_hw_regs qca99x0_regs = {
.rtc_soc_base_address = 0x00080000,
.rtc_wmac_base_address = 0x00000000,
.soc_core_base_address = 0x00082000,
.wlan_mac_base_address = 0x00030000,
.ce_wrapper_base_address = 0x0004d000,
.ce0_base_address = 0x0004a000,
.ce1_base_address = 0x0004a400,
.ce2_base_address = 0x0004a800,
.ce3_base_address = 0x0004ac00,
.ce4_base_address = 0x0004b000,
.ce5_base_address = 0x0004b400,
.ce6_base_address = 0x0004b800,
.ce7_base_address = 0x0004bc00,
/* Note: qca99x0 supports upto 12 Copy Engines. Other than address of
* CE0 and CE1 no other copy engine is directly referred in the code.
* It is not really necessary to assign address for newly supported
* CEs in this address table.
* Copy Engine Address
* CE8 0x0004c000
* CE9 0x0004c400
* CE10 0x0004c800
* CE11 0x0004cc00
*/
.soc_reset_control_si0_rst_mask = 0x00000001,
.soc_reset_control_ce_rst_mask = 0x00000100,
.soc_chip_id_address = 0x000000ec,
.scratch_3_address = 0x00040050,
.fw_indicator_address = 0x00040050,
.pcie_local_base_address = 0x00000000,
.ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
.ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
.pcie_intr_fw_mask = 0x00100000,
.pcie_intr_ce_mask_all = 0x000fff00,
.pcie_intr_clr_address = 0x00000010,
};
const struct ath10k_hw_regs qca4019_regs = {
.rtc_soc_base_address = 0x00080000,
.soc_core_base_address = 0x00082000,
.wlan_mac_base_address = 0x00030000,
.ce_wrapper_base_address = 0x0004d000,
.ce0_base_address = 0x0004a000,
.ce1_base_address = 0x0004a400,
.ce2_base_address = 0x0004a800,
.ce3_base_address = 0x0004ac00,
.ce4_base_address = 0x0004b000,
.ce5_base_address = 0x0004b400,
.ce6_base_address = 0x0004b800,
.ce7_base_address = 0x0004bc00,
/* qca4019 supports upto 12 copy engines. Since base address
* of ce8 to ce11 are not directly referred in the code,
* no need have them in separate members in this table.
* Copy Engine Address
* CE8 0x0004c000
* CE9 0x0004c400
* CE10 0x0004c800
* CE11 0x0004cc00
*/
.soc_reset_control_si0_rst_mask = 0x00000001,
.soc_reset_control_ce_rst_mask = 0x00000100,
.soc_chip_id_address = 0x000000ec,
.fw_indicator_address = 0x0004f00c,
.ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
.ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
.pcie_intr_fw_mask = 0x00100000,
.pcie_intr_ce_mask_all = 0x000fff00,
.pcie_intr_clr_address = 0x00000010,
};
const struct ath10k_hw_values qca988x_values = {
.rtc_state_val_on = 3,
.ce_count = 8,
.msi_assign_ce_max = 7,
.num_target_ce_config_wlan = 7,
.ce_desc_meta_data_mask = 0xFFFC,
.ce_desc_meta_data_lsb = 2,
};
const struct ath10k_hw_values qca6174_values = {
.rtc_state_val_on = 3,
.ce_count = 8,
.msi_assign_ce_max = 7,
.num_target_ce_config_wlan = 7,
.ce_desc_meta_data_mask = 0xFFFC,
.ce_desc_meta_data_lsb = 2,
};
const struct ath10k_hw_values qca99x0_values = {
.rtc_state_val_on = 5,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
.ce_desc_meta_data_mask = 0xFFF0,
.ce_desc_meta_data_lsb = 4,
};
const struct ath10k_hw_values qca9888_values = {
.rtc_state_val_on = 3,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
.ce_desc_meta_data_mask = 0xFFF0,
.ce_desc_meta_data_lsb = 4,
};
const struct ath10k_hw_values qca4019_values = {
.ce_count = 12,
.num_target_ce_config_wlan = 10,
.ce_desc_meta_data_mask = 0xFFF0,
.ce_desc_meta_data_lsb = 4,
};
const struct ath10k_hw_regs wcn3990_regs = {
.rtc_soc_base_address = 0x00000000,
.rtc_wmac_base_address = 0x00000000,
.soc_core_base_address = 0x00000000,
.ce_wrapper_base_address = 0x0024C000,
.ce0_base_address = 0x00240000,
.ce1_base_address = 0x00241000,
.ce2_base_address = 0x00242000,
.ce3_base_address = 0x00243000,
.ce4_base_address = 0x00244000,
.ce5_base_address = 0x00245000,
.ce6_base_address = 0x00246000,
.ce7_base_address = 0x00247000,
.ce8_base_address = 0x00248000,
.ce9_base_address = 0x00249000,
.ce10_base_address = 0x0024A000,
.ce11_base_address = 0x0024B000,
.soc_chip_id_address = 0x000000f0,
.soc_reset_control_si0_rst_mask = 0x00000001,
.soc_reset_control_ce_rst_mask = 0x00000100,
.ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
.ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
.pcie_intr_fw_mask = 0x00100000,
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_src_ring = {
.msb = 0x00000010,
.lsb = 0x00000010,
.mask = GENMASK(17, 17),
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_ring = {
.msb = 0x00000012,
.lsb = 0x00000012,
.mask = GENMASK(18, 18),
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_dmax = {
.msb = 0x00000000,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_ctrl1 wcn3990_ctrl1 = {
.addr = 0x00000018,
.src_ring = &wcn3990_src_ring,
.dst_ring = &wcn3990_dst_ring,
.dmax = &wcn3990_dmax,
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_host_ie_cc = {
.mask = GENMASK(0, 0),
};
static struct ath10k_hw_ce_host_ie wcn3990_host_ie = {
.copy_complete = &wcn3990_host_ie_cc,
};
static struct ath10k_hw_ce_host_wm_regs wcn3990_wm_reg = {
.dstr_lmask = 0x00000010,
.dstr_hmask = 0x00000008,
.srcr_lmask = 0x00000004,
.srcr_hmask = 0x00000002,
.cc_mask = 0x00000001,
.wm_mask = 0x0000001E,
.addr = 0x00000030,
};
static struct ath10k_hw_ce_misc_regs wcn3990_misc_reg = {
.axi_err = 0x00000100,
.dstr_add_err = 0x00000200,
.srcr_len_err = 0x00000100,
.dstr_mlen_vio = 0x00000080,
.dstr_overflow = 0x00000040,
.srcr_overflow = 0x00000020,
.err_mask = 0x000003E0,
.addr = 0x00000038,
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_low = {
.msb = 0x00000000,
.lsb = 0x00000010,
.mask = GENMASK(31, 16),
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_high = {
.msb = 0x0000000f,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_src_ring = {
.addr = 0x0000004c,
.low_rst = 0x00000000,
.high_rst = 0x00000000,
.wm_low = &wcn3990_src_wm_low,
.wm_high = &wcn3990_src_wm_high,
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_low = {
.lsb = 0x00000010,
.mask = GENMASK(31, 16),
};
static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_high = {
.msb = 0x0000000f,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_dst_ring = {
.addr = 0x00000050,
.low_rst = 0x00000000,
.high_rst = 0x00000000,
.wm_low = &wcn3990_dst_wm_low,
.wm_high = &wcn3990_dst_wm_high,
};
static struct ath10k_hw_ce_ctrl1_upd wcn3990_ctrl1_upd = {
.shift = 19,
.mask = 0x00080000,
.enable = 0x00000000,
};
const struct ath10k_hw_ce_regs wcn3990_ce_regs = {
.sr_base_addr_lo = 0x00000000,
.sr_base_addr_hi = 0x00000004,
.sr_size_addr = 0x00000008,
.dr_base_addr_lo = 0x0000000c,
.dr_base_addr_hi = 0x00000010,
.dr_size_addr = 0x00000014,
.misc_ie_addr = 0x00000034,
.sr_wr_index_addr = 0x0000003c,
.dst_wr_index_addr = 0x00000040,
.current_srri_addr = 0x00000044,
.current_drri_addr = 0x00000048,
.ce_rri_low = 0x0024C004,
.ce_rri_high = 0x0024C008,
.host_ie_addr = 0x0000002c,
.ctrl1_regs = &wcn3990_ctrl1,
.host_ie = &wcn3990_host_ie,
.wm_regs = &wcn3990_wm_reg,
.misc_regs = &wcn3990_misc_reg,
.wm_srcr = &wcn3990_wm_src_ring,
.wm_dstr = &wcn3990_wm_dst_ring,
.upd = &wcn3990_ctrl1_upd,
};
const struct ath10k_hw_values wcn3990_values = {
.rtc_state_val_on = 5,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 12,
.ce_desc_meta_data_mask = 0xFFF0,
.ce_desc_meta_data_lsb = 4,
};
static struct ath10k_hw_ce_regs_addr_map qcax_src_ring = {
.msb = 0x00000010,
.lsb = 0x00000010,
.mask = GENMASK(16, 16),
};
static struct ath10k_hw_ce_regs_addr_map qcax_dst_ring = {
.msb = 0x00000011,
.lsb = 0x00000011,
.mask = GENMASK(17, 17),
};
static struct ath10k_hw_ce_regs_addr_map qcax_dmax = {
.msb = 0x0000000f,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_ctrl1 qcax_ctrl1 = {
.addr = 0x00000010,
.hw_mask = 0x0007ffff,
.sw_mask = 0x0007ffff,
.hw_wr_mask = 0x00000000,
.sw_wr_mask = 0x0007ffff,
.reset_mask = 0xffffffff,
.reset = 0x00000080,
.src_ring = &qcax_src_ring,
.dst_ring = &qcax_dst_ring,
.dmax = &qcax_dmax,
};
static struct ath10k_hw_ce_regs_addr_map qcax_cmd_halt_status = {
.msb = 0x00000003,
.lsb = 0x00000003,
.mask = GENMASK(3, 3),
};
static struct ath10k_hw_ce_cmd_halt qcax_cmd_halt = {
.msb = 0x00000000,
.mask = GENMASK(0, 0),
.status_reset = 0x00000000,
.status = &qcax_cmd_halt_status,
};
static struct ath10k_hw_ce_regs_addr_map qcax_host_ie_cc = {
.msb = 0x00000000,
.lsb = 0x00000000,
.mask = GENMASK(0, 0),
};
static struct ath10k_hw_ce_host_ie qcax_host_ie = {
.copy_complete_reset = 0x00000000,
.copy_complete = &qcax_host_ie_cc,
};
static struct ath10k_hw_ce_host_wm_regs qcax_wm_reg = {
.dstr_lmask = 0x00000010,
.dstr_hmask = 0x00000008,
.srcr_lmask = 0x00000004,
.srcr_hmask = 0x00000002,
.cc_mask = 0x00000001,
.wm_mask = 0x0000001E,
.addr = 0x00000030,
};
static struct ath10k_hw_ce_misc_regs qcax_misc_reg = {
.axi_err = 0x00000400,
.dstr_add_err = 0x00000200,
.srcr_len_err = 0x00000100,
.dstr_mlen_vio = 0x00000080,
.dstr_overflow = 0x00000040,
.srcr_overflow = 0x00000020,
.err_mask = 0x000007E0,
.addr = 0x00000038,
};
static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_low = {
.msb = 0x0000001f,
.lsb = 0x00000010,
.mask = GENMASK(31, 16),
};
static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_high = {
.msb = 0x0000000f,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_src_ring = {
.addr = 0x0000004c,
.low_rst = 0x00000000,
.high_rst = 0x00000000,
.wm_low = &qcax_src_wm_low,
.wm_high = &qcax_src_wm_high,
};
static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_low = {
.lsb = 0x00000010,
.mask = GENMASK(31, 16),
};
static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_high = {
.msb = 0x0000000f,
.lsb = 0x00000000,
.mask = GENMASK(15, 0),
};
static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_dst_ring = {
.addr = 0x00000050,
.low_rst = 0x00000000,
.high_rst = 0x00000000,
.wm_low = &qcax_dst_wm_low,
.wm_high = &qcax_dst_wm_high,
};
const struct ath10k_hw_ce_regs qcax_ce_regs = {
.sr_base_addr_lo = 0x00000000,
.sr_size_addr = 0x00000004,
.dr_base_addr_lo = 0x00000008,
.dr_size_addr = 0x0000000c,
.ce_cmd_addr = 0x00000018,
.misc_ie_addr = 0x00000034,
.sr_wr_index_addr = 0x0000003c,
.dst_wr_index_addr = 0x00000040,
.current_srri_addr = 0x00000044,
.current_drri_addr = 0x00000048,
.host_ie_addr = 0x0000002c,
.ctrl1_regs = &qcax_ctrl1,
.cmd_halt = &qcax_cmd_halt,
.host_ie = &qcax_host_ie,
.wm_regs = &qcax_wm_reg,
.misc_regs = &qcax_misc_reg,
.wm_srcr = &qcax_wm_src_ring,
.wm_dstr = &qcax_wm_dst_ring,
};
const struct ath10k_hw_clk_params qca6174_clk[ATH10K_HW_REFCLK_COUNT] = {
{
.refclk = 48000000,
.div = 0xe,
.rnfrac = 0x2aaa8,
.settle_time = 2400,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 19200000,
.div = 0x24,
.rnfrac = 0x2aaa8,
.settle_time = 960,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 24000000,
.div = 0x1d,
.rnfrac = 0x15551,
.settle_time = 1200,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 26000000,
.div = 0x1b,
.rnfrac = 0x4ec4,
.settle_time = 1300,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 37400000,
.div = 0x12,
.rnfrac = 0x34b49,
.settle_time = 1870,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 38400000,
.div = 0x12,
.rnfrac = 0x15551,
.settle_time = 1920,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 40000000,
.div = 0x12,
.rnfrac = 0x26665,
.settle_time = 2000,
.refdiv = 0,
.outdiv = 1,
},
{
.refclk = 52000000,
.div = 0x1b,
.rnfrac = 0x4ec4,
.settle_time = 2600,
.refdiv = 0,
.outdiv = 1,
},
};
void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
{
u32 cc_fix = 0;
u32 rcc_fix = 0;
enum ath10k_hw_cc_wraparound_type wraparound_type;
survey->filled |= SURVEY_INFO_TIME |
SURVEY_INFO_TIME_BUSY;
wraparound_type = ar->hw_params.cc_wraparound_type;
if (cc < cc_prev || rcc < rcc_prev) {
switch (wraparound_type) {
case ATH10K_HW_CC_WRAP_SHIFTED_ALL:
if (cc < cc_prev) {
cc_fix = 0x7fffffff;
survey->filled &= ~SURVEY_INFO_TIME_BUSY;
}
break;
case ATH10K_HW_CC_WRAP_SHIFTED_EACH:
if (cc < cc_prev)
cc_fix = 0x7fffffff;
if (rcc < rcc_prev)
rcc_fix = 0x7fffffff;
break;
case ATH10K_HW_CC_WRAP_DISABLED:
break;
}
}
cc -= cc_prev - cc_fix;
rcc -= rcc_prev - rcc_fix;
survey->time = CCNT_TO_MSEC(ar, cc);
survey->time_busy = CCNT_TO_MSEC(ar, rcc);
}
/* The firmware does not support setting the coverage class. Instead this
* function monitors and modifies the corresponding MAC registers.
*/
static void ath10k_hw_qca988x_set_coverage_class(struct ath10k *ar,
s16 value)
{
u32 slottime_reg;
u32 slottime;
u32 timeout_reg;
u32 ack_timeout;
u32 cts_timeout;
u32 phyclk_reg;
u32 phyclk;
u64 fw_dbglog_mask;
u32 fw_dbglog_level;
mutex_lock(&ar->conf_mutex);
/* Only modify registers if the core is started. */
if ((ar->state != ATH10K_STATE_ON) &&
(ar->state != ATH10K_STATE_RESTARTED)) {
spin_lock_bh(&ar->data_lock);
/* Store config value for when radio boots up */
ar->fw_coverage.coverage_class = value;
spin_unlock_bh(&ar->data_lock);
goto unlock;
}
/* Retrieve the current values of the two registers that need to be
* adjusted.
*/
slottime_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
WAVE1_PCU_GBL_IFS_SLOT);
timeout_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
WAVE1_PCU_ACK_CTS_TIMEOUT);
phyclk_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
WAVE1_PHYCLK);
phyclk = MS(phyclk_reg, WAVE1_PHYCLK_USEC) + 1;
if (value < 0)
value = ar->fw_coverage.coverage_class;
/* Break out if the coverage class and registers have the expected
* value.
*/
if (value == ar->fw_coverage.coverage_class &&
slottime_reg == ar->fw_coverage.reg_slottime_conf &&
timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf &&
phyclk_reg == ar->fw_coverage.reg_phyclk)
goto unlock;
/* Store new initial register values from the firmware. */
if (slottime_reg != ar->fw_coverage.reg_slottime_conf)
ar->fw_coverage.reg_slottime_orig = slottime_reg;
if (timeout_reg != ar->fw_coverage.reg_ack_cts_timeout_conf)
ar->fw_coverage.reg_ack_cts_timeout_orig = timeout_reg;
ar->fw_coverage.reg_phyclk = phyclk_reg;
/* Calculate new value based on the (original) firmware calculation. */
slottime_reg = ar->fw_coverage.reg_slottime_orig;
timeout_reg = ar->fw_coverage.reg_ack_cts_timeout_orig;
/* Do some sanity checks on the slottime register. */
if (slottime_reg % phyclk) {
ath10k_warn(ar,
"failed to set coverage class: expected integer microsecond value in register\n");
goto store_regs;
}
slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT);
slottime = slottime / phyclk;
if (slottime != 9 && slottime != 20) {
ath10k_warn(ar,
"failed to set coverage class: expected slot time of 9 or 20us in HW register. It is %uus.\n",
slottime);
goto store_regs;
}
/* Recalculate the register values by adding the additional propagation
* delay (3us per coverage class).
*/
slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT);
slottime += value * 3 * phyclk;
slottime = min_t(u32, slottime, WAVE1_PCU_GBL_IFS_SLOT_MAX);
slottime = SM(slottime, WAVE1_PCU_GBL_IFS_SLOT);
slottime_reg = (slottime_reg & ~WAVE1_PCU_GBL_IFS_SLOT_MASK) | slottime;
/* Update ack timeout (lower halfword). */
ack_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK);
ack_timeout += 3 * value * phyclk;
ack_timeout = min_t(u32, ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX);
ack_timeout = SM(ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK);
/* Update cts timeout (upper halfword). */
cts_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS);
cts_timeout += 3 * value * phyclk;
cts_timeout = min_t(u32, cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX);
cts_timeout = SM(cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS);
timeout_reg = ack_timeout | cts_timeout;
ath10k_hif_write32(ar,
WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_GBL_IFS_SLOT,
slottime_reg);
ath10k_hif_write32(ar,
WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_ACK_CTS_TIMEOUT,
timeout_reg);
/* Ensure we have a debug level of WARN set for the case that the
* coverage class is larger than 0. This is important as we need to
* set the registers again if the firmware does an internal reset and
* this way we will be notified of the event.
*/
fw_dbglog_mask = ath10k_debug_get_fw_dbglog_mask(ar);
fw_dbglog_level = ath10k_debug_get_fw_dbglog_level(ar);
if (value > 0) {
if (fw_dbglog_level > ATH10K_DBGLOG_LEVEL_WARN)
fw_dbglog_level = ATH10K_DBGLOG_LEVEL_WARN;
fw_dbglog_mask = ~0;
}
ath10k_wmi_dbglog_cfg(ar, fw_dbglog_mask, fw_dbglog_level);
store_regs:
/* After an error we will not retry setting the coverage class. */
spin_lock_bh(&ar->data_lock);
ar->fw_coverage.coverage_class = value;
spin_unlock_bh(&ar->data_lock);
ar->fw_coverage.reg_slottime_conf = slottime_reg;
ar->fw_coverage.reg_ack_cts_timeout_conf = timeout_reg;
unlock:
mutex_unlock(&ar->conf_mutex);
}
/**
* ath10k_hw_qca6174_enable_pll_clock() - enable the qca6174 hw pll clock
* @ar: the ath10k blob
*
* This function is very hardware specific, the clock initialization
* steps is very sensitive and could lead to unknown crash, so they
* should be done in sequence.
*
* *** Be aware if you planned to refactor them. ***
*
* Return: 0 if successfully enable the pll, otherwise EINVAL
*/
static int ath10k_hw_qca6174_enable_pll_clock(struct ath10k *ar)
{
int ret, wait_limit;
u32 clk_div_addr, pll_init_addr, speed_addr;
u32 addr, reg_val, mem_val;
struct ath10k_hw_params *hw;
const struct ath10k_hw_clk_params *hw_clk;
hw = &ar->hw_params;
if (ar->regs->core_clk_div_address == 0 ||
ar->regs->cpu_pll_init_address == 0 ||
ar->regs->cpu_speed_address == 0)
return -EINVAL;
clk_div_addr = ar->regs->core_clk_div_address;
pll_init_addr = ar->regs->cpu_pll_init_address;
speed_addr = ar->regs->cpu_speed_address;
/* Read efuse register to find out the right hw clock configuration */
addr = (RTC_SOC_BASE_ADDRESS | EFUSE_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
/* sanitize if the hw refclk index is out of the boundary */
if (MS(reg_val, EFUSE_XTAL_SEL) > ATH10K_HW_REFCLK_COUNT)
return -EINVAL;
hw_clk = &hw->hw_clk[MS(reg_val, EFUSE_XTAL_SEL)];
/* Set the rnfrac and outdiv params to bb_pll register */
addr = (RTC_SOC_BASE_ADDRESS | BB_PLL_CONFIG_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~(BB_PLL_CONFIG_FRAC_MASK | BB_PLL_CONFIG_OUTDIV_MASK);
reg_val |= (SM(hw_clk->rnfrac, BB_PLL_CONFIG_FRAC) |
SM(hw_clk->outdiv, BB_PLL_CONFIG_OUTDIV));
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* Set the correct settle time value to pll_settle register */
addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_SETTLE_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~WLAN_PLL_SETTLE_TIME_MASK;
reg_val |= SM(hw_clk->settle_time, WLAN_PLL_SETTLE_TIME);
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* Set the clock_ctrl div to core_clk_ctrl register */
addr = (RTC_SOC_BASE_ADDRESS | SOC_CORE_CLK_CTRL_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~SOC_CORE_CLK_CTRL_DIV_MASK;
reg_val |= SM(1, SOC_CORE_CLK_CTRL_DIV);
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* Set the clock_div register */
mem_val = 1;
ret = ath10k_bmi_write_memory(ar, clk_div_addr, &mem_val,
sizeof(mem_val));
if (ret)
return -EINVAL;
/* Configure the pll_control register */
addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val |= (SM(hw_clk->refdiv, WLAN_PLL_CONTROL_REFDIV) |
SM(hw_clk->div, WLAN_PLL_CONTROL_DIV) |
SM(1, WLAN_PLL_CONTROL_NOPWD));
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* busy wait (max 1s) the rtc_sync status register indicate ready */
wait_limit = 100000;
addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET);
do {
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
break;
wait_limit--;
udelay(10);
} while (wait_limit > 0);
if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
return -EINVAL;
/* Unset the pll_bypass in pll_control register */
addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~WLAN_PLL_CONTROL_BYPASS_MASK;
reg_val |= SM(0, WLAN_PLL_CONTROL_BYPASS);
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* busy wait (max 1s) the rtc_sync status register indicate ready */
wait_limit = 100000;
addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET);
do {
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
break;
wait_limit--;
udelay(10);
} while (wait_limit > 0);
if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
return -EINVAL;
/* Enable the hardware cpu clock register */
addr = (RTC_SOC_BASE_ADDRESS | SOC_CPU_CLOCK_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~SOC_CPU_CLOCK_STANDARD_MASK;
reg_val |= SM(1, SOC_CPU_CLOCK_STANDARD);
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* unset the nopwd from pll_control register */
addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
if (ret)
return -EINVAL;
reg_val &= ~WLAN_PLL_CONTROL_NOPWD_MASK;
ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
if (ret)
return -EINVAL;
/* enable the pll_init register */
mem_val = 1;
ret = ath10k_bmi_write_memory(ar, pll_init_addr, &mem_val,
sizeof(mem_val));
if (ret)
return -EINVAL;
/* set the target clock frequency to speed register */
ret = ath10k_bmi_write_memory(ar, speed_addr, &hw->target_cpu_freq,
sizeof(hw->target_cpu_freq));
if (ret)
return -EINVAL;
return 0;
}
/* Program CPU_ADDR_MSB to allow different memory
* region access.
*/
static void ath10k_hw_map_target_mem(struct ath10k *ar, u32 msb)
{
u32 address = SOC_CORE_BASE_ADDRESS + FW_RAM_CONFIG_ADDRESS;
ath10k_hif_write32(ar, address, msb);
}
/* 1. Write to memory region of target, such as IRAM adn DRAM.
* 2. Target address( 0 ~ 00100000 & 0x00400000~0x00500000)
* can be written directly. See ath10k_pci_targ_cpu_to_ce_addr() too.
* 3. In order to access the region other than the above,
* we need to set the value of register CPU_ADDR_MSB.
* 4. Target memory access space is limited to 1M size. If the size is larger
* than 1M, need to split it and program CPU_ADDR_MSB accordingly.
*/
static int ath10k_hw_diag_segment_msb_download(struct ath10k *ar,
const void *buffer,
u32 address,
u32 length)
{
u32 addr = address & REGION_ACCESS_SIZE_MASK;
int ret, remain_size, size;
const u8 *buf;
ath10k_hw_map_target_mem(ar, CPU_ADDR_MSB_REGION_VAL(address));
if (addr + length > REGION_ACCESS_SIZE_LIMIT) {
size = REGION_ACCESS_SIZE_LIMIT - addr;
remain_size = length - size;
ret = ath10k_hif_diag_write(ar, address, buffer, size);
if (ret) {
ath10k_warn(ar,
"failed to download the first %d bytes segment to address:0x%x: %d\n",
size, address, ret);
goto done;
}
/* Change msb to the next memory region*/
ath10k_hw_map_target_mem(ar,
CPU_ADDR_MSB_REGION_VAL(address) + 1);
buf = buffer + size;
ret = ath10k_hif_diag_write(ar,
address & ~REGION_ACCESS_SIZE_MASK,
buf, remain_size);
if (ret) {
ath10k_warn(ar,
"failed to download the second %d bytes segment to address:0x%x: %d\n",
remain_size,
address & ~REGION_ACCESS_SIZE_MASK,
ret);
goto done;
}
} else {
ret = ath10k_hif_diag_write(ar, address, buffer, length);
if (ret) {
ath10k_warn(ar,
"failed to download the only %d bytes segment to address:0x%x: %d\n",
length, address, ret);
goto done;
}
}
done:
/* Change msb to DRAM */
ath10k_hw_map_target_mem(ar,
CPU_ADDR_MSB_REGION_VAL(DRAM_BASE_ADDRESS));
return ret;
}
static int ath10k_hw_diag_segment_download(struct ath10k *ar,
const void *buffer,
u32 address,
u32 length)
{
if (address >= DRAM_BASE_ADDRESS + REGION_ACCESS_SIZE_LIMIT)
/* Needs to change MSB for memory write */
return ath10k_hw_diag_segment_msb_download(ar, buffer,
address, length);
else
return ath10k_hif_diag_write(ar, address, buffer, length);
}
int ath10k_hw_diag_fast_download(struct ath10k *ar,
u32 address,
const void *buffer,
u32 length)
{
const u8 *buf = buffer;
bool sgmt_end = false;
u32 base_addr = 0;
u32 base_len = 0;
u32 left = 0;
struct bmi_segmented_file_header *hdr;
struct bmi_segmented_metadata *metadata;
int ret = 0;
if (length < sizeof(*hdr))
return -EINVAL;
/* check firmware header. If it has no correct magic number
* or it's compressed, returns error.
*/
hdr = (struct bmi_segmented_file_header *)buf;
if (__le32_to_cpu(hdr->magic_num) != BMI_SGMTFILE_MAGIC_NUM) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"Not a supported firmware, magic_num:0x%x\n",
hdr->magic_num);
return -EINVAL;
}
if (hdr->file_flags != 0) {
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"Not a supported firmware, file_flags:0x%x\n",
hdr->file_flags);
return -EINVAL;
}
metadata = (struct bmi_segmented_metadata *)hdr->data;
left = length - sizeof(*hdr);
while (left > 0) {
if (left < sizeof(*metadata)) {
ath10k_warn(ar, "firmware segment is truncated: %d\n",
left);
ret = -EINVAL;
break;
}
base_addr = __le32_to_cpu(metadata->addr);
base_len = __le32_to_cpu(metadata->length);
buf = metadata->data;
left -= sizeof(*metadata);
switch (base_len) {
case BMI_SGMTFILE_BEGINADDR:
/* base_addr is the start address to run */
ret = ath10k_bmi_set_start(ar, base_addr);
base_len = 0;
break;
case BMI_SGMTFILE_DONE:
/* no more segment */
base_len = 0;
sgmt_end = true;
ret = 0;
break;
case BMI_SGMTFILE_BDDATA:
case BMI_SGMTFILE_EXEC:
ath10k_warn(ar,
"firmware has unsupported segment:%d\n",
base_len);
ret = -EINVAL;
break;
default:
if (base_len > left) {
/* sanity check */
ath10k_warn(ar,
"firmware has invalid segment length, %d > %d\n",
base_len, left);
ret = -EINVAL;
break;
}
ret = ath10k_hw_diag_segment_download(ar,
buf,
base_addr,
base_len);
if (ret)
ath10k_warn(ar,
"failed to download firmware via diag interface:%d\n",
ret);
break;
}
if (ret || sgmt_end)
break;
metadata = (struct bmi_segmented_metadata *)(buf + base_len);
left -= base_len;
}
if (ret == 0)
ath10k_dbg(ar, ATH10K_DBG_BOOT,
"boot firmware fast diag download successfully.\n");
return ret;
}
static int ath10k_htt_tx_rssi_enable(struct htt_resp *resp)
{
return (resp->data_tx_completion.flags2 & HTT_TX_CMPL_FLAG_DATA_RSSI);
}
static int ath10k_htt_tx_rssi_enable_wcn3990(struct htt_resp *resp)
{
return (resp->data_tx_completion.flags2 &
HTT_TX_DATA_RSSI_ENABLE_WCN3990);
}
static int ath10k_get_htt_tx_data_rssi_pad(struct htt_resp *resp)
{
struct htt_data_tx_completion_ext extd;
int pad_bytes = 0;
if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_RETRIES)
pad_bytes += sizeof(extd.a_retries) /
sizeof(extd.msdus_rssi[0]);
if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_TIMESTAMP)
pad_bytes += sizeof(extd.t_stamp) / sizeof(extd.msdus_rssi[0]);
return pad_bytes;
}
const struct ath10k_hw_ops qca988x_ops = {
.set_coverage_class = ath10k_hw_qca988x_set_coverage_class,
};
static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes(struct htt_rx_desc *rxd)
{
return MS(__le32_to_cpu(rxd->msdu_end.qca99x0.info1),
RX_MSDU_END_INFO1_L3_HDR_PAD);
}
static bool ath10k_qca99x0_rx_desc_msdu_limit_error(struct htt_rx_desc *rxd)
{
return !!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_MSDU_LIMIT_ERR));
}
const struct ath10k_hw_ops qca99x0_ops = {
.rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes,
.rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error,
};
const struct ath10k_hw_ops qca6174_ops = {
.set_coverage_class = ath10k_hw_qca988x_set_coverage_class,
.enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock,
.is_rssi_enable = ath10k_htt_tx_rssi_enable,
};
const struct ath10k_hw_ops wcn3990_ops = {
.tx_data_rssi_pad_bytes = ath10k_get_htt_tx_data_rssi_pad,
.is_rssi_enable = ath10k_htt_tx_rssi_enable_wcn3990,
};