246a1c4c6b
The pata_parport is a libata-based replacement of the old PARIDE subsystem - driver for parallel port IDE devices. It uses the original paride low-level protocol drivers but does not need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices behind parallel port adapters are handled by the ATA layer. This will allow paride and its high-level drivers to be removed. Unfortunately, libata drivers cannot sleep so pata_parport claims parport before activating the ata host and keeps it claimed (and protocol connected) until the ata host is removed. This means that no devices can be chained (neither other pata_parport devices nor a printer). paride and pata_parport are mutually exclusive because the compiled protocol drivers are incompatible. Tested with: - Imation SuperDisk LS-120 and HP C4381A (EPAT) - Freecom Parallel CD (FRPW) - Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ) - Backpack CD-RW 222011 and CD-RW 19350 (BPCK6) The following bugs in low-level protocol drivers were found and will be fixed later: Note: EPP-32 mode is buggy in EPAT - and also in all other protocol drivers - they don't handle non-multiple-of-4 block transfers correctly. This causes problems with LS-120 drive. There is also another bug in EPAT: EPP modes don't work unless a 4-bit or 8-bit mode is used first (probably some initialization missing?). Once the device is initialized, EPP works until power cycle. So after device power on, you have to: echo "parport0 epat 0" >/sys/bus/pata_parport/new_device echo pata_parport.0 >/sys/bus/pata_parport/delete_device echo "parport0 epat 4" >/sys/bus/pata_parport/new_device (autoprobe will initialize correctly as it tries the slowest modes first but you'll get the broken EPP-32 mode) Note: EPP modes are buggy in FRPW, only modes 0 and 1 work. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.