iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
25908cac84
linux/drivers/scsi
History
Xiaofei Tan 25908cac84 scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeout 
There is an issue that link reset can't recover PHY when STP link timeout.
Because current process of enabling PHY for v3 hw will wait last
transmission done. The time of one transmission depends IO size, disk model
and so on. Normally, it should be shorter than 50ms. But the last
transmission could be never done for some abnormal scenarios, such as STP
link timeout.

This patch is to fix the issue. Check PHY status after starting process of
enabling PHY for 50ms. If the PHY is still active, we disable it forcibly
by PHY reset. Of course, we need to clear the PHY reset bit when enable
PHY.

Besides, the function disable_phy_v3_hw() should not be suitable to call in
interrupts for hilink bug for this 50ms delay. Then, we do link reset for
hilink bug directly. The change is that we don't clear the invalid dword
count register. This is better. Because we should not clear such error
count while not saved.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-19 21:57:39 -04:00
..
aacraid scsi: aacraid: remove AAC_STAT_GOOD define 2018-07-10 22:42:47 -04:00
aic7xxx SCSI fixes on 20180613 2018-06-14 16:35:32 +09:00
aic94xx treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
arcmsr scsi: arcmsr: Update driver version to v1.40.00.09-20180709 2018-07-12 22:34:59 -04:00
arm treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
be2iscsi scsi: be2iscsi: Update copyright 2018-06-19 22:02:25 -04:00
bfa scsi: bfa: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
bnx2fc treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
bnx2i scsi: bnx2i: add error handling for ioremap_nocache 2018-06-19 22:02:25 -04:00
csiostor scsi: csiostor: update ingress pack and pad boundary value 2018-07-19 21:57:39 -04:00
cxgbi scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() 2018-04-09 21:32:45 -04:00
cxlflash scsi: cxlflash: Change return type for fault handler 2018-06-21 22:57:39 -04:00
device_handler Merge branch 'fixes' into misc 2018-04-03 17:38:39 -07:00
dpt
esas2r treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
fcoe scsi: fcoe: hold disc_mutex when traversing rport lists 2018-07-12 23:01:16 -04:00
fnic treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
hisi_sas scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeout 2018-07-19 21:57:39 -04:00
ibmvscsi scsi: ibmvscsi: Improve strings handling 2018-07-02 16:14:40 -04:00
ibmvscsi_tgt scsi: target: Remove second argument from fabric_make_tpg() 2018-07-02 16:44:32 -04:00
isci treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
libfc scsi: libfc: Add WARN_ON() when deleting rports 2018-07-12 23:01:16 -04:00
libsas scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
lpfc scsi: lpfc: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
megaraid scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
mpt3sas scsi: mpt3sas: Fix for regression caused by sparse cleanups 2018-07-12 22:40:03 -04:00
mvsas scsi: mvsas: fix wrong endianness of sgpio api 2018-03-01 21:07:48 -05:00
osd SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
pcmcia scsi: remove the fdomain and fdomain_cs drivers 2018-03-19 22:54:47 -04:00
pm8001 treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
qedf SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
qedi scsi: qedi: tidy up a size calculation 2018-07-02 16:17:22 -04:00
qla2xxx scsi: target: Remove second argument from fabric_make_tpg() 2018-07-02 16:44:32 -04:00
qla4xxx treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
smartpqi scsi: smartpqi: bump driver version to 1.1.4-130 2018-06-19 22:02:25 -04:00
snic scsi: snic: fix printing time intervals 2018-07-12 23:01:16 -04:00
sym53c8xx_2 scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
ufs scsi: ufs: add Hisilicon ufs driver code 2018-07-19 21:57:39 -04:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: 3w-9xxx: fix a missing-check bug 2018-05-08 01:32:18 -04:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: 3ware: use 64-bit times for FW time sync 2017-12-04 20:32:53 -05:00
3w-sas.h
3w-xxxx.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c scsi: 53c700: move bus reset to host reset 2017-08-25 17:21:11 -04:00
53c700.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
53c700.scr
a100u2w.c scsi: a100u2w: Use module_pci_driver 2018-05-01 23:31:40 -04:00
a100u2w.h
a2091.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
aha152x.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: am53c974: Use module_pci_driver 2018-05-01 23:29:41 -04:00
atari_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
atp870u.c scsi: atp870u: 64 bit bug in atp885_init() 2018-03-01 21:10:36 -05:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
dpt_i2o.c scsi: dpt_i2o: Remove VLA usage 2018-05-18 12:03:51 -04:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase 2017-08-10 19:55:35 -04:00
esp_scsi.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
FlashPoint.c
g_NCR5380.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gvp11.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c scsi: core: avoid host-wide host_busy counter for scsi_mq 2018-06-26 12:53:26 -04:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hpsa.c SCSI fixes on 20180613 2018-06-14 16:35:32 +09:00
hpsa.h scsi: hpsa: fix selection of reply queue 2018-03-14 23:31:13 -04:00
hptiop.c scsi: hptiop: Simplify reset handling 2017-08-25 17:21:10 -04:00
hptiop.h
imm.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c
initio.h
ipr.c scsi: ipr: Format HCAM overlay ID 0x41 2018-06-19 22:02:25 -04:00
ipr.h scsi: ipr: Format HCAM overlay ID 0x41 2018-06-19 22:02:25 -04:00
ips.c scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
ips.h scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi_tcp: don't set a bounce limit 2018-04-19 00:00:44 -04:00
iscsi_tcp.h
jazz_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
Kconfig scsi: remove NCR_Q720 driver 2018-07-10 22:48:54 -04:00
lasi700.c parisc/scsi/lasi700: Fix section mismatches 2017-08-22 16:34:36 +02:00
libiscsi_tcp.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
libiscsi.c treewide: kvzalloc() -> kvcalloc() 2018-06-12 16:19:22 -07:00
mac53c94.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: mac_esp: Fix PIO transfers for MESSAGE IN phase 2017-08-10 19:55:34 -04:00
mac_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
Makefile scsi: remove NCR_Q720 driver 2018-07-10 22:48:54 -04:00
megaraid.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: mvme147: stop using scsi_module.c 2018-03-19 22:54:47 -04:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
mvumi.h
ncr53c8xx.c scsi: ncr53c8xx: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
ncr53c8xx.h
NCR5380.c SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
NCR5380.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: nsp32: fix logic bug in error handling 2017-10-16 22:38:44 -04:00
nsp32.h
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst.c treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: ppa: mark expected switch fall-throughs 2017-12-04 20:32:52 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c
qla1280.c timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicfas.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicpti.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_class: Add 'JBOD' RAID level 2018-02-12 11:43:25 -05:00
script_asm.pl
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c scsi: scsi_debug: skip long delays when ndelay small 2018-07-12 23:01:16 -04:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi_ioctl.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_lib.c scsi: core: fix scsi_host_queue_ready 2018-07-02 16:24:02 -04:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c
scsi_priv.h scsi: dh: Remove scsi_dh_remove_device() 2017-12-07 21:13:45 -05:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_sysctl.c
scsi_sysfs.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c scsi: scsi_transport_fc: use 64-bit timestamps consistently 2018-06-26 11:58:07 -04:00
scsi_transport_iscsi.c block: remove parent device reference from struct bsg_class_device 2018-05-29 13:00:25 -06:00
scsi_transport_sas.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_dif.c
sd_zbc.c scsi: sd_zbc: Remove an assignment from sd_zbc_setup_report_cmnd() 2018-07-02 16:18:11 -04:00
sd.c scsi: sd: Remove a superfluous assignment 2018-06-26 12:34:43 -04:00
sd.h scsi: sd_zbc: Change the type of the ZBC fields into u32 2018-04-19 00:00:44 -04:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c scsi: sg: clean up gfp_mask in sg_build_indirect 2018-06-19 22:02:25 -04:00
sgiwd93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
sim710.c
sni_53c710.c
sr_ioctl.c sr: pass down correctly sized SCSI sense buffer 2018-05-21 12:21:14 -06:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr.c sr: get/drop reference to device in revalidate and check_events 2018-04-11 11:26:09 -06:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c
storvsc_drv.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
sun3_scsi_vme.c
sun3_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
sun3x_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
sun_esp.c
virtio_scsi.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
vmw_pvscsi.c scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated aborts 2018-05-01 23:15:40 -04:00
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: wd719x: Use module_pci_driver 2018-05-01 23:30:12 -04:00
wd719x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
xen-scsifront.c
zalon.c parisc/scsi/zalon: Fix section mismatches 2017-08-22 16:34:36 +02:00
zorro7xx.c
zorro_esp.c scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards 2018-04-19 00:00:44 -04:00