Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

289 lines
6.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* SMP support for pSeries machines.
*
* Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
*
* Plus various changes from other IBM teams...
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/ptrace.h>
#include <linux/atomic.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/rtas.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
#include <asm/xics.h>
#include <asm/xive.h>
#include <asm/dbell.h>
#include <asm/plpar_wrappers.h>
#include <asm/code-patching.h>
#include "pseries.h"
#include "offline_states.h"
/*
* The Primary thread of each non-boot processor was started from the OF client
* interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
*/
static cpumask_var_t of_spin_mask;
/* Query where a cpu is now. Return codes #defined in plpar_wrappers.h */
int smp_query_cpu_stopped(unsigned int pcpu)
{
int cpu_status, status;
int qcss_tok = rtas_token("query-cpu-stopped-state");
if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
printk_once(KERN_INFO
"Firmware doesn't support query-cpu-stopped-state\n");
return QCSS_HARDWARE_ERROR;
}
status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
if (status != 0) {
printk(KERN_ERR
"RTAS query-cpu-stopped-state failed: %i\n", status);
return status;
}
return cpu_status;
}
/**
* smp_startup_cpu() - start the given cpu
*
* At boot time, there is nothing to do for primary threads which were
* started from Open Firmware. For anything else, call RTAS with the
* appropriate start location.
*
* Returns:
* 0 - failure
* 1 - success
*/
static inline int smp_startup_cpu(unsigned int lcpu)
{
int status;
unsigned long start_here =
__pa(ppc_function_entry(generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
if (cpumask_test_cpu(lcpu, of_spin_mask))
/* Already started by OF and sitting in spin loop */
return 1;
pcpu = get_hard_smp_processor_id(lcpu);
/* Check to see if the CPU out of FW already for kexec */
if (smp_query_cpu_stopped(pcpu) == QCSS_NOT_STOPPED){
cpumask_set_cpu(lcpu, of_spin_mask);
return 1;
}
/* Fixup atomic count: it exited inside IRQ handler. */
task_thread_info(paca_ptrs[lcpu]->__current)->preempt_count = 0;
#ifdef CONFIG_HOTPLUG_CPU
if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
goto out;
#endif
/*
* If the RTAS start-cpu token does not exist then presume the
* cpu is already spinning.
*/
start_cpu = rtas_token("start-cpu");
if (start_cpu == RTAS_UNKNOWN_SERVICE)
return 1;
status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
if (status != 0) {
printk(KERN_ERR "start-cpu failed: %i\n", status);
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
out:
#endif
return 1;
}
static void smp_setup_cpu(int cpu)
{
if (xive_enabled())
xive_smp_setup_cpu();
else if (cpu != boot_cpuid)
xics_setup_cpu();
if (firmware_has_feature(FW_FEATURE_SPLPAR))
vpa_init(cpu);
cpumask_clear_cpu(cpu, of_spin_mask);
#ifdef CONFIG_HOTPLUG_CPU
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
}
static int smp_pSeries_kick_cpu(int nr)
{
if (nr < 0 || nr >= nr_cpu_ids)
return -EINVAL;
if (!smp_startup_cpu(nr))
return -ENOENT;
/*
* The processor is currently spinning, waiting for the
* cpu_start field to become non-zero After we set cpu_start,
* the processor will continue on to secondary_start
*/
paca_ptrs[nr]->cpu_start = 1;
#ifdef CONFIG_HOTPLUG_CPU
set_preferred_offline_state(nr, CPU_STATE_ONLINE);
if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
long rc;
unsigned long hcpuid;
hcpuid = get_hard_smp_processor_id(nr);
rc = plpar_hcall_norets(H_PROD, hcpuid);
if (rc != H_SUCCESS)
printk(KERN_ERR "Error: Prod to wake up processor %d "
"Ret= %ld\n", nr, rc);
}
#endif
return 0;
}
static int pseries_smp_prepare_cpu(int cpu)
{
if (xive_enabled())
return xive_smp_prepare_cpu(cpu);
return 0;
}
static void smp_pseries_cause_ipi(int cpu)
{
/* POWER9 should not use this handler */
if (doorbell_try_core_ipi(cpu))
return;
icp_ops->cause_ipi(cpu);
}
static int pseries_cause_nmi_ipi(int cpu)
{
int hwcpu;
if (cpu == NMI_IPI_ALL_OTHERS) {
hwcpu = H_SIGNAL_SYS_RESET_ALL_OTHERS;
} else {
if (cpu < 0) {
WARN_ONCE(true, "incorrect cpu parameter %d", cpu);
return 0;
}
hwcpu = get_hard_smp_processor_id(cpu);
}
if (plpar_signal_sys_reset(hwcpu) == H_SUCCESS)
return 1;
return 0;
}
static __init void pSeries_smp_probe_xics(void)
{
xics_smp_probe();
if (cpu_has_feature(CPU_FTR_DBELL))
smp_ops->cause_ipi = smp_pseries_cause_ipi;
else
smp_ops->cause_ipi = icp_ops->cause_ipi;
}
static __init void pSeries_smp_probe(void)
{
if (xive_enabled())
/*
* Don't use P9 doorbells when XIVE is enabled. IPIs
* using MMIOs should be faster
*/
xive_smp_probe();
else
pSeries_smp_probe_xics();
}
static struct smp_ops_t pseries_smp_ops = {
.message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
.cause_ipi = NULL, /* Filled at runtime by pSeries_smp_probe() */
.cause_nmi_ipi = pseries_cause_nmi_ipi,
.probe = pSeries_smp_probe,
.prepare_cpu = pseries_smp_prepare_cpu,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_setup_cpu,
.cpu_bootable = smp_generic_cpu_bootable,
};
/* This is called very early */
void __init smp_init_pseries(void)
{
int i;
pr_debug(" -> smp_init_pSeries()\n");
smp_ops = &pseries_smp_ops;
alloc_bootmem_cpumask_var(&of_spin_mask);
/*
* Mark threads which are still spinning in hold loops
*
* We know prom_init will not have started them if RTAS supports
* query-cpu-stopped-state.
*/
if (rtas_token("query-cpu-stopped-state") == RTAS_UNKNOWN_SERVICE) {
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
if (cpu_thread_in_core(i) == 0)
cpumask_set_cpu(i, of_spin_mask);
}
} else
cpumask_copy(of_spin_mask, cpu_present_mask);
cpumask_clear_cpu(boot_cpuid, of_spin_mask);
}
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
smp_ops->give_timebase = rtas_give_timebase;
smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
}