..
audio.h
ALSA: Allow passing platform_data for pxa2xx-ac97
2009-08-13 22:19:37 +01:00
balloon3.h
[ARM] pxa: balloon3 ( http://balloonboard.org/ ) base machine support
2009-09-10 18:49:39 +08:00
bitfield.h
camera.h
V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver
2008-10-12 09:36:50 -02:00
clkdev.h
[ARM] pxa: convert to clkdev and match clocks by struct device where possible
2008-11-27 12:38:23 +00:00
colibri.h
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
2009-09-10 18:49:31 +08:00
corgi.h
Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-21 09:42:29 +08:00
csb726.h
[ARM] pxa: add initial support for Cogent CSB726 board
2009-03-13 17:10:44 +08:00
debug-macro.S
dma.h
[ARM] pxa: introduce plat-pxa for PXA common code and add DMA support
2009-03-23 10:11:31 +08:00
entry-macro.S
[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling
2009-09-10 18:49:26 +08:00
eseries-gpio.h
ASoC: machine support for Toshiba e740 PDA
2009-01-19 16:15:41 +00:00
eseries-irq.h
gpio.h
[ARM] pxa: move common GPIO handling code into plat-pxa
2009-03-23 10:11:33 +08:00
gumstix.h
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
h5000.h
[ARM] pxa: add basic support for HP iPAQ h5000
2008-12-02 14:43:50 +08:00
hardware.h
[ARM] pxa: add cpu_is_pxa950() and Kconfig options
2009-09-10 18:49:25 +08:00
hx4700.h
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
2009-06-05 10:40:31 +08:00
idp.h
io.h
[ARM] Add a common typesafe __io implementation
2008-11-30 11:45:54 +00:00
irda.h
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
2009-09-10 18:49:39 +08:00
irqs.h
[ARM] pxa: balloon3 ( http://balloonboard.org/ ) base machine support
2009-09-10 18:49:39 +08:00
littleton.h
[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)
2008-12-17 22:52:12 +08:00
lpd270.h
lubbock.h
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
magician.h
[ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
2009-04-04 08:24:38 +08:00
mainstone.h
memory.h
[ARM] Ensure that both MAX_DMA_ADDRESS and ISA_DMA_THRESHOLD are defined
2008-11-30 13:26:47 +00:00
mfp-pxa2xx.h
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mfp-pxa3xx.h
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mfp-pxa25x.h
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mfp-pxa27x.h
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mfp-pxa300.h
[ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines
2009-07-06 18:11:10 +08:00
mfp-pxa320.h
[ARM] pxa: add additional mfp definitions for pxa320
2009-06-05 10:32:55 +08:00
mfp-pxa930.h
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mfp.h
[ARM] pxa: remove duplicate mfp definition in mach
2009-09-10 18:49:24 +08:00
mioa701.h
[ARM] pxa/MioA701: discovered new gpio definitions.
2008-12-02 14:43:48 +08:00
mmc.h
[ARM] pxamci: add simple gpio controls
2009-09-10 18:49:29 +08:00
mtd-xip.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
ohci.h
[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
2008-10-07 19:12:57 +01:00
palmasoc.h
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
2009-04-19 21:56:54 +08:00
palmld.h
[ARM] 5522/1: PalmLD: IDE support
2009-05-31 14:50:40 +01:00
palmt5.h
[ARM] pxa: PalmTX and PalmT5 USB fixes
2009-04-13 12:10:58 +08:00
palmtc.h
[ARM] pxa: Palm Tungsten|C initial support
2009-09-10 18:49:36 +08:00
palmte2.h
[ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
2009-04-04 10:26:33 +08:00
palmtx.h
[ARM] pxa/palm: add NAND Flash support for PalmTX
2009-09-10 18:49:35 +08:00
palmz72.h
[ARM] pxa/palm: various fixes for PalmZ72 (mostly audio asoc and usb)
2009-06-16 16:55:24 +08:00
pcm027.h
pcm990_baseboard.h
pm.h
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
2009-06-11 23:25:09 +08:00
poodle.h
[ARM] pxa/poodle: prepare scoop for the generic GPIO API
2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases
2009-04-07 08:31:07 -07:00
pxa2xx-gpio.h
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
pxa2xx-regs.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
pxa3xx_nand.h
[MTD] [NAND] pxa3xx_nand: add ability to keep controller settings defined by OBM/bootloader
2009-03-20 18:37:44 +00:00
pxa3xx-regs.h
[ARM] pxa: add clock definition for graphics controller
2009-09-10 18:49:26 +08:00
pxa25x-udc.h
pxa25x.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa27x_keypad.h
Input: pxa27x_keypad - allow modifying keymap from userspace
2009-09-10 22:11:34 -07:00
pxa27x-udc.h
pxa27x.h
[ARM] pxa: add ability to set suspend mode
2009-06-05 10:32:48 +08:00
pxa300.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa320.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa930_rotary.h
Input: add support for enhanced rotary controller on pxa930 and pxa935
2008-12-29 04:59:16 -08:00
pxa930_trkball.h
Input: add support for trackball on pxa930 and pxa935
2008-12-29 04:58:58 -08:00
pxa930.h
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxafb.h
[ARM] pxafb: add accelerator ID for PXA3xx GCU
2009-09-12 00:16:27 +08:00
regs-ac97.h
[ARM] pxa: fix missing of __REG() definition for ac97 registers access
2009-01-19 11:39:36 +08:00
regs-intc.h
[ARM] pxa: add more registers in interrupt controller
2009-09-10 18:49:26 +08:00
regs-lcd.h
[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
2008-12-29 18:00:04 +08:00
regs-ost.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
regs-rtc.h
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
regs-ssp.h
Merge branch 'origin' into devel
2009-03-28 20:29:51 +00:00
regs-uart.h
[ARM] pxa: move UART register definitions into dedicated regs-uart.h
2008-12-02 14:42:38 +08:00
reset.h
[ARM] pxa: allow gpio_reset drive high during normal work
2009-05-18 21:52:09 +08:00
sharpsl_pm.h
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
2009-06-11 22:20:42 +08:00
sharpsl.h
[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl
2008-10-29 11:45:37 +08:00
spitz.h
[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h
2008-10-21 22:45:57 +08:00
ssp.h
[ARM] 5224/2: PXA SSP: Introduce register accessors
2008-09-09 16:32:52 +01:00
system.h
[ARM] pass reboot command line to arch_reset()
2009-03-19 16:20:24 +00:00
timex.h
[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
2008-12-29 17:57:48 +08:00
tosa_bt.h
tosa.h
backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-21 00:19:49 +01:00
treo680.h
[ARM] pxa/treo680: initial support
2009-06-16 21:03:34 +08:00
trizeps4.h
[ARM] 5204/1: Trizeps4 SOM update
2008-10-01 22:33:11 +01:00
udc.h
uncompress.h
[ARM] pxa: balloon3 ( http://balloonboard.org/ ) base machine support
2009-09-10 18:49:39 +08:00
viper.h
Basic support for the Arcom/Eurotech Viper SBC.
2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h
misc: replace remaining __FUNCTION__ with __func__
2008-10-20 16:17:42 -07:00
