iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2947a4567f
linux/drivers/regulator/lp8788-buck.c
Douglas Anderson 259b93b21a
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 
Probing of regulators can be a slow operation and can contribute to
slower boot times. This is especially true if a regulator is turned on
at probe time (with regulator-boot-on or regulator-always-on) and the
regulator requires delays (off-on-time, ramp time, etc).

While the overall kernel is not ready to switch to async probe by
default, as per the discussion on the mailing lists [1] it is believed
that the regulator subsystem is in good shape and we can move
regulator drivers over wholesale. There is no way to just magically
opt in all regulators (regulators are just normal drivers like
platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all
regulators found in 'drivers/regulator' individually.

Given the number of drivers touched and the impossibility to test this
ahead of time, it wouldn't be shocking at all if this caused a
regression for someone. If there is a regression caused by this patch,
it's likely to be one of the cases talked about in [1]. As a "quick
fix", drivers involved in the regression could be fixed by changing
them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix
would be to directly fix the problem that caused the issue with async
probe.

The approach here follows a similar approach that was used for the mmc
subsystem several years ago [2]. In fact, I ran nearly the same python
script to auto-generate the changes. The only thing I changed was to
search for "i2c_driver", "spmi_driver", and "spi_driver" in addition
to "platform_driver".

[1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk
[2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-20 13:11:25 +00:00

554 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* TI LP8788 MFD - buck regulator driver
*
* Copyright 2012 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/lp8788.h>
#include <linux/gpio.h>
/* register address */
#define LP8788_EN_BUCK 0x0C
#define LP8788_BUCK_DVS_SEL 0x1D
#define LP8788_BUCK1_VOUT0 0x1E
#define LP8788_BUCK1_VOUT1 0x1F
#define LP8788_BUCK1_VOUT2 0x20
#define LP8788_BUCK1_VOUT3 0x21
#define LP8788_BUCK2_VOUT0 0x22
#define LP8788_BUCK2_VOUT1 0x23
#define LP8788_BUCK2_VOUT2 0x24
#define LP8788_BUCK2_VOUT3 0x25
#define LP8788_BUCK3_VOUT 0x26
#define LP8788_BUCK4_VOUT 0x27
#define LP8788_BUCK1_TIMESTEP 0x28
#define LP8788_BUCK_PWM 0x2D
/* mask/shift bits */
#define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */
#define LP8788_EN_BUCK2_M BIT(1)
#define LP8788_EN_BUCK3_M BIT(2)
#define LP8788_EN_BUCK4_M BIT(3)
#define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */
#define LP8788_BUCK1_DVS_M 0x03
#define LP8788_BUCK1_DVS_S 0
#define LP8788_BUCK2_DVS_SEL_M 0x40
#define LP8788_BUCK2_DVS_M 0x30
#define LP8788_BUCK2_DVS_S 4
#define LP8788_BUCK1_DVS_I2C BIT(2)
#define LP8788_BUCK2_DVS_I2C BIT(6)
#define LP8788_BUCK1_DVS_PIN (0 << 2)
#define LP8788_BUCK2_DVS_PIN (0 << 6)
#define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */
#define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */
#define LP8788_STARTUP_TIME_S 3
#define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */
#define LP8788_FPWM_BUCK1_S 0
#define LP8788_FPWM_BUCK2_M BIT(1)
#define LP8788_FPWM_BUCK2_S 1
#define LP8788_FPWM_BUCK3_M BIT(2)
#define LP8788_FPWM_BUCK3_S 2
#define LP8788_FPWM_BUCK4_M BIT(3)
#define LP8788_FPWM_BUCK4_S 3
#define INVALID_ADDR 0xFF
#define LP8788_FORCE_PWM 1
#define LP8788_AUTO_PWM 0
#define PIN_LOW 0
#define PIN_HIGH 1
#define ENABLE_TIME_USEC 32
#define BUCK_FPWM_MASK(x) (1 << (x))
#define BUCK_FPWM_SHIFT(x) (x)
enum lp8788_dvs_state {
DVS_LOW = GPIOF_OUT_INIT_LOW,
DVS_HIGH = GPIOF_OUT_INIT_HIGH,
};
enum lp8788_dvs_mode {
REGISTER,
EXTPIN,
};
enum lp8788_buck_id {
BUCK1,
BUCK2,
BUCK3,
BUCK4,
};
struct lp8788_buck {
struct lp8788 *lp;
struct regulator_dev *regulator;
void *dvs;
};
/* BUCK 1 ~ 4 voltage ranges */
static const struct linear_range buck_volt_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
};
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
enum lp8788_dvs_state pinstate;
if (!dvs)
return;
pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
if (gpio_is_valid(dvs->gpio))
gpio_set_value(dvs->gpio, pinstate);
}
static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs;
enum lp8788_dvs_state pin1, pin2;
if (!dvs)
return;
switch (dvs->vsel) {
case DVS_SEL_V0:
pin1 = DVS_LOW;
pin2 = DVS_LOW;
break;
case DVS_SEL_V1:
pin1 = DVS_HIGH;
pin2 = DVS_LOW;
break;
case DVS_SEL_V2:
pin1 = DVS_LOW;
pin2 = DVS_HIGH;
break;
case DVS_SEL_V3:
pin1 = DVS_HIGH;
pin2 = DVS_HIGH;
break;
default:
return;
}
if (gpio_is_valid(dvs->gpio[0]))
gpio_set_value(dvs->gpio[0], pin1);
if (gpio_is_valid(dvs->gpio[1]))
gpio_set_value(dvs->gpio[1], pin2);
}
static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
{
switch (id) {
case BUCK1:
lp8788_buck1_set_dvs(buck);
break;
case BUCK2:
lp8788_buck2_set_dvs(buck);
break;
default:
break;
}
}
static enum lp8788_dvs_mode
lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id)
{
u8 val, mask;
switch (id) {
case BUCK1:
mask = LP8788_BUCK1_DVS_SEL_M;
break;
case BUCK2:
mask = LP8788_BUCK2_DVS_SEL_M;
break;
default:
return REGISTER;
}
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
return val & mask ? REGISTER : EXTPIN;
}
static bool lp8788_is_valid_buck_addr(u8 addr)
{
switch (addr) {
case LP8788_BUCK1_VOUT0:
case LP8788_BUCK1_VOUT1:
case LP8788_BUCK1_VOUT2:
case LP8788_BUCK1_VOUT3:
case LP8788_BUCK2_VOUT0:
case LP8788_BUCK2_VOUT1:
case LP8788_BUCK2_VOUT2:
case LP8788_BUCK2_VOUT3:
return true;
default:
return false;
}
}
static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
struct lp8788_buck1_dvs *b1_dvs;
struct lp8788_buck2_dvs *b2_dvs;
u8 val, idx, addr;
int pin1, pin2;
switch (id) {
case BUCK1:
if (mode == EXTPIN) {
b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs;
if (!b1_dvs)
goto err;
idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0;
} else {
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
}
addr = LP8788_BUCK1_VOUT0 + idx;
break;
case BUCK2:
if (mode == EXTPIN) {
b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs;
if (!b2_dvs)
goto err;
pin1 = gpio_get_value(b2_dvs->gpio[0]);
pin2 = gpio_get_value(b2_dvs->gpio[1]);
if (pin1 == PIN_LOW && pin2 == PIN_LOW)
idx = 0;
else if (pin1 == PIN_LOW && pin2 == PIN_HIGH)
idx = 2;
else if (pin1 == PIN_HIGH && pin2 == PIN_LOW)
idx = 1;
else
idx = 3;
} else {
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
}
addr = LP8788_BUCK2_VOUT0 + idx;
break;
default:
goto err;
}
return addr;
err:
return INVALID_ADDR;
}
static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 addr;
if (buck->dvs)
lp8788_set_dvs(buck, id);
addr = lp8788_select_buck_vout_addr(buck, id);
if (!lp8788_is_valid_buck_addr(addr))
return -EINVAL;
return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector);
}
static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
int ret;
u8 val, addr;
addr = lp8788_select_buck_vout_addr(buck, id);
if (!lp8788_is_valid_buck_addr(addr))
return -EINVAL;
ret = lp8788_read_byte(buck->lp, addr, &val);
if (ret)
return ret;
return val & LP8788_VOUT_M;
}
static int lp8788_buck_enable_time(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 val, addr = LP8788_BUCK1_TIMESTEP + id;
if (lp8788_read_byte(buck->lp, addr, &val))
return -EINVAL;
val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
return ENABLE_TIME_USEC * val;
}
static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 mask, val;
mask = BUCK_FPWM_MASK(id);
switch (mode) {
case REGULATOR_MODE_FAST:
val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
break;
case REGULATOR_MODE_NORMAL:
val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
break;
default:
return -EINVAL;
}
return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
}
static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 val;
int ret;
ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
if (ret)
return ret;
return val & BUCK_FPWM_MASK(id) ?
REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
static const struct regulator_ops lp8788_buck12_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_buck_enable_time,
.set_mode = lp8788_buck_set_mode,
.get_mode = lp8788_buck_get_mode,
};
static const struct regulator_ops lp8788_buck34_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_buck_enable_time,
.set_mode = lp8788_buck_set_mode,
.get_mode = lp8788_buck_get_mode,
};
static const struct regulator_desc lp8788_buck_desc[] = {
{
.name = "buck1",
.id = BUCK1,
.ops = &lp8788_buck12_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK1_M,
},
{
.name = "buck2",
.id = BUCK2,
.ops = &lp8788_buck12_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK2_M,
},
{
.name = "buck3",
.id = BUCK3,
.ops = &lp8788_buck34_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK3_VOUT,
.vsel_mask = LP8788_VOUT_M,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK3_M,
},
{
.name = "buck4",
.id = BUCK4,
.ops = &lp8788_buck34_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK4_VOUT,
.vsel_mask = LP8788_VOUT_M,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK4_M,
},
};
static int lp8788_dvs_gpio_request(struct platform_device *pdev,
struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
char *b1_name = "LP8788_B1_DVS";
char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" };
int i, gpio, ret;
switch (id) {
case BUCK1:
gpio = pdata->buck1_dvs->gpio;
ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
b1_name);
if (ret)
return ret;
buck->dvs = pdata->buck1_dvs;
break;
case BUCK2:
for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
gpio = pdata->buck2_dvs->gpio[i];
ret = devm_gpio_request_one(&pdev->dev, gpio,
DVS_LOW, b2_name[i]);
if (ret)
return ret;
}
buck->dvs = pdata->buck2_dvs;
break;
default:
break;
}
return 0;
}
static int lp8788_init_dvs(struct platform_device *pdev,
struct lp8788_buck *buck, enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
/* no dvs for buck3, 4 */
if (id > BUCK2)
return 0;
/* no dvs platform data, then dvs will be selected by I2C registers */
if (!pdata)
goto set_default_dvs_mode;
if ((id == BUCK1 && !pdata->buck1_dvs) ||
(id == BUCK2 && !pdata->buck2_dvs))
goto set_default_dvs_mode;
if (lp8788_dvs_gpio_request(pdev, buck, id))
goto set_default_dvs_mode;
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
val[id]);
set_default_dvs_mode:
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
default_dvs_mode[id]);
}
static int lp8788_buck_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
int id = pdev->id;
struct lp8788_buck *buck;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int ret;
if (id >= LP8788_NUM_BUCKS)
return -EINVAL;
buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
if (!buck)
return -ENOMEM;
buck->lp = lp;
ret = lp8788_init_dvs(pdev, buck, id);
if (ret)
return ret;
cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
cfg.driver_data = buck;
cfg.regmap = lp->regmap;
rdev = devm_regulator_register(&pdev->dev, &lp8788_buck_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
buck->regulator = rdev;
platform_set_drvdata(pdev, buck);
return 0;
}
static struct platform_driver lp8788_buck_driver = {
.probe = lp8788_buck_probe,
.driver = {
.name = LP8788_DEV_BUCK,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
static int __init lp8788_buck_init(void)
{
return platform_driver_register(&lp8788_buck_driver);
}
subsys_initcall(lp8788_buck_init);
static void __exit lp8788_buck_exit(void)
{
platform_driver_unregister(&lp8788_buck_driver);
}
module_exit(lp8788_buck_exit);
MODULE_DESCRIPTION("TI LP8788 BUCK Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lp8788-buck");
Reference in New Issue View Git Blame Copy Permalink