ac3b432839
module_layout manages different types of memory (text, data, rodata, etc.) in one allocation, which is problematic for some reasons: 1. It is hard to enable CONFIG_STRICT_MODULE_RWX. 2. It is hard to use huge pages in modules (and not break strict rwx). 3. Many archs uses module_layout for arch-specific data, but it is not obvious how these data are used (are they RO, RX, or RW?) Improve the scenario by replacing 2 (or 3) module_layout per module with up to 7 module_memory per module: MOD_TEXT, MOD_DATA, MOD_RODATA, MOD_RO_AFTER_INIT, MOD_INIT_TEXT, MOD_INIT_DATA, MOD_INIT_RODATA, and allocating them separately. This adds slightly more entries to mod_tree (from up to 3 entries per module, to up to 7 entries per module). However, this at most adds a small constant overhead to __module_address(), which is expected to be fast. Various archs use module_layout for different data. These data are put into different module_memory based on their location in module_layout. IOW, data that used to go with text is allocated with MOD_MEM_TYPE_TEXT; data that used to go with data is allocated with MOD_MEM_TYPE_DATA, etc. module_memory simplifies quite some of the module code. For example, ARCH_WANTS_MODULES_DATA_IN_VMALLOC is a lot cleaner, as it just uses a different allocator for the data. kernel/module/strict_rwx.c is also much cleaner with module_memory. Signed-off-by: Song Liu <song@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
341 lines
9.4 KiB
C
341 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* Kernel module help for PPC.
|
|
Copyright (C) 2001 Rusty Russell.
|
|
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleloader.h>
|
|
#include <linux/elf.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ftrace.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/sort.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/code-patching.h>
|
|
|
|
/* Count how many different relocations (different symbol, different
|
|
addend) */
|
|
static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
|
|
{
|
|
unsigned int i, r_info, r_addend, _count_relocs;
|
|
|
|
_count_relocs = 0;
|
|
r_info = 0;
|
|
r_addend = 0;
|
|
for (i = 0; i < num; i++)
|
|
/* Only count 24-bit relocs, others don't need stubs */
|
|
if (ELF32_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
|
|
(r_info != ELF32_R_SYM(rela[i].r_info) ||
|
|
r_addend != rela[i].r_addend)) {
|
|
_count_relocs++;
|
|
r_info = ELF32_R_SYM(rela[i].r_info);
|
|
r_addend = rela[i].r_addend;
|
|
}
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
_count_relocs++; /* add one for ftrace_caller */
|
|
#endif
|
|
return _count_relocs;
|
|
}
|
|
|
|
static int relacmp(const void *_x, const void *_y)
|
|
{
|
|
const Elf32_Rela *x, *y;
|
|
|
|
y = (Elf32_Rela *)_x;
|
|
x = (Elf32_Rela *)_y;
|
|
|
|
/* Compare the entire r_info (as opposed to ELF32_R_SYM(r_info) only) to
|
|
* make the comparison cheaper/faster. It won't affect the sorting or
|
|
* the counting algorithms' performance
|
|
*/
|
|
if (x->r_info < y->r_info)
|
|
return -1;
|
|
else if (x->r_info > y->r_info)
|
|
return 1;
|
|
else if (x->r_addend < y->r_addend)
|
|
return -1;
|
|
else if (x->r_addend > y->r_addend)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Get the potential trampolines size required of the init and
|
|
non-init sections */
|
|
static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
|
|
const Elf32_Shdr *sechdrs,
|
|
const char *secstrings,
|
|
int is_init)
|
|
{
|
|
unsigned long ret = 0;
|
|
unsigned i;
|
|
|
|
/* Everything marked ALLOC (this includes the exported
|
|
symbols) */
|
|
for (i = 1; i < hdr->e_shnum; i++) {
|
|
/* If it's called *.init*, and we're not init, we're
|
|
not interested */
|
|
if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != NULL)
|
|
!= is_init)
|
|
continue;
|
|
|
|
/* We don't want to look at debug sections. */
|
|
if (strstr(secstrings + sechdrs[i].sh_name, ".debug"))
|
|
continue;
|
|
|
|
if (sechdrs[i].sh_type == SHT_RELA) {
|
|
pr_debug("Found relocations in section %u\n", i);
|
|
pr_debug("Ptr: %p. Number: %u\n",
|
|
(void *)hdr + sechdrs[i].sh_offset,
|
|
sechdrs[i].sh_size / sizeof(Elf32_Rela));
|
|
|
|
/* Sort the relocation information based on a symbol and
|
|
* addend key. This is a stable O(n*log n) complexity
|
|
* algorithm but it will reduce the complexity of
|
|
* count_relocs() to linear complexity O(n)
|
|
*/
|
|
sort((void *)hdr + sechdrs[i].sh_offset,
|
|
sechdrs[i].sh_size / sizeof(Elf32_Rela),
|
|
sizeof(Elf32_Rela), relacmp, NULL);
|
|
|
|
ret += count_relocs((void *)hdr
|
|
+ sechdrs[i].sh_offset,
|
|
sechdrs[i].sh_size
|
|
/ sizeof(Elf32_Rela))
|
|
* sizeof(struct ppc_plt_entry);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int module_frob_arch_sections(Elf32_Ehdr *hdr,
|
|
Elf32_Shdr *sechdrs,
|
|
char *secstrings,
|
|
struct module *me)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Find .plt and .init.plt sections */
|
|
for (i = 0; i < hdr->e_shnum; i++) {
|
|
if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
|
|
me->arch.init_plt_section = i;
|
|
else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
|
|
me->arch.core_plt_section = i;
|
|
}
|
|
if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
|
|
pr_err("Module doesn't contain .plt or .init.plt sections.\n");
|
|
return -ENOEXEC;
|
|
}
|
|
|
|
/* Override their sizes */
|
|
sechdrs[me->arch.core_plt_section].sh_size
|
|
= get_plt_size(hdr, sechdrs, secstrings, 0);
|
|
sechdrs[me->arch.init_plt_section].sh_size
|
|
= get_plt_size(hdr, sechdrs, secstrings, 1);
|
|
return 0;
|
|
}
|
|
|
|
static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
|
|
{
|
|
if (entry->jump[0] != PPC_RAW_LIS(_R12, PPC_HA(val)))
|
|
return 0;
|
|
if (entry->jump[1] != PPC_RAW_ADDI(_R12, _R12, PPC_LO(val)))
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
/* Set up a trampoline in the PLT to bounce us to the distant function */
|
|
static uint32_t do_plt_call(void *location,
|
|
Elf32_Addr val,
|
|
const Elf32_Shdr *sechdrs,
|
|
struct module *mod)
|
|
{
|
|
struct ppc_plt_entry *entry;
|
|
|
|
pr_debug("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
|
|
/* Init, or core PLT? */
|
|
if (within_module_core((unsigned long)location, mod))
|
|
entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
|
|
else
|
|
entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
|
|
|
|
/* Find this entry, or if that fails, the next avail. entry */
|
|
while (entry->jump[0]) {
|
|
if (entry_matches(entry, val)) return (uint32_t)entry;
|
|
entry++;
|
|
}
|
|
|
|
if (patch_instruction(&entry->jump[0], ppc_inst(PPC_RAW_LIS(_R12, PPC_HA(val)))))
|
|
return 0;
|
|
if (patch_instruction(&entry->jump[1], ppc_inst(PPC_RAW_ADDI(_R12, _R12, PPC_LO(val)))))
|
|
return 0;
|
|
if (patch_instruction(&entry->jump[2], ppc_inst(PPC_RAW_MTCTR(_R12))))
|
|
return 0;
|
|
if (patch_instruction(&entry->jump[3], ppc_inst(PPC_RAW_BCTR())))
|
|
return 0;
|
|
|
|
pr_debug("Initialized plt for 0x%x at %p\n", val, entry);
|
|
return (uint32_t)entry;
|
|
}
|
|
|
|
static int patch_location_16(uint32_t *loc, u16 value)
|
|
{
|
|
loc = PTR_ALIGN_DOWN(loc, sizeof(u32));
|
|
return patch_instruction(loc, ppc_inst((*loc & 0xffff0000) | value));
|
|
}
|
|
|
|
int apply_relocate_add(Elf32_Shdr *sechdrs,
|
|
const char *strtab,
|
|
unsigned int symindex,
|
|
unsigned int relsec,
|
|
struct module *module)
|
|
{
|
|
unsigned int i;
|
|
Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
|
|
Elf32_Sym *sym;
|
|
uint32_t *location;
|
|
uint32_t value;
|
|
|
|
pr_debug("Applying ADD relocate section %u to %u\n", relsec,
|
|
sechdrs[relsec].sh_info);
|
|
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
|
|
/* This is where to make the change */
|
|
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
|
|
+ rela[i].r_offset;
|
|
/* This is the symbol it is referring to. Note that all
|
|
undefined symbols have been resolved. */
|
|
sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
|
|
+ ELF32_R_SYM(rela[i].r_info);
|
|
/* `Everything is relative'. */
|
|
value = sym->st_value + rela[i].r_addend;
|
|
|
|
switch (ELF32_R_TYPE(rela[i].r_info)) {
|
|
case R_PPC_ADDR32:
|
|
/* Simply set it */
|
|
*(uint32_t *)location = value;
|
|
break;
|
|
|
|
case R_PPC_ADDR16_LO:
|
|
/* Low half of the symbol */
|
|
if (patch_location_16(location, PPC_LO(value)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case R_PPC_ADDR16_HI:
|
|
/* Higher half of the symbol */
|
|
if (patch_location_16(location, PPC_HI(value)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case R_PPC_ADDR16_HA:
|
|
if (patch_location_16(location, PPC_HA(value)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case R_PPC_REL24:
|
|
if ((int)(value - (uint32_t)location) < -0x02000000
|
|
|| (int)(value - (uint32_t)location) >= 0x02000000) {
|
|
value = do_plt_call(location, value,
|
|
sechdrs, module);
|
|
if (!value)
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* Only replace bits 2 through 26 */
|
|
pr_debug("REL24 value = %08X. location = %08X\n",
|
|
value, (uint32_t)location);
|
|
pr_debug("Location before: %08X.\n",
|
|
*(uint32_t *)location);
|
|
value = (*(uint32_t *)location & ~PPC_LI_MASK) |
|
|
PPC_LI(value - (uint32_t)location);
|
|
|
|
if (patch_instruction(location, ppc_inst(value)))
|
|
return -EFAULT;
|
|
|
|
pr_debug("Location after: %08X.\n",
|
|
*(uint32_t *)location);
|
|
pr_debug("ie. jump to %08X+%08X = %08X\n",
|
|
*(uint32_t *)PPC_LI((uint32_t)location), (uint32_t)location,
|
|
(*(uint32_t *)PPC_LI((uint32_t)location)) + (uint32_t)location);
|
|
break;
|
|
|
|
case R_PPC_REL32:
|
|
/* 32-bit relative jump. */
|
|
*(uint32_t *)location = value - (uint32_t)location;
|
|
break;
|
|
|
|
default:
|
|
pr_err("%s: unknown ADD relocation: %u\n",
|
|
module->name,
|
|
ELF32_R_TYPE(rela[i].r_info));
|
|
return -ENOEXEC;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
notrace int module_trampoline_target(struct module *mod, unsigned long addr,
|
|
unsigned long *target)
|
|
{
|
|
ppc_inst_t jmp[4];
|
|
|
|
/* Find where the trampoline jumps to */
|
|
if (copy_inst_from_kernel_nofault(jmp, (void *)addr))
|
|
return -EFAULT;
|
|
if (__copy_inst_from_kernel_nofault(jmp + 1, (void *)addr + 4))
|
|
return -EFAULT;
|
|
if (__copy_inst_from_kernel_nofault(jmp + 2, (void *)addr + 8))
|
|
return -EFAULT;
|
|
if (__copy_inst_from_kernel_nofault(jmp + 3, (void *)addr + 12))
|
|
return -EFAULT;
|
|
|
|
/* verify that this is what we expect it to be */
|
|
if ((ppc_inst_val(jmp[0]) & 0xffff0000) != PPC_RAW_LIS(_R12, 0))
|
|
return -EINVAL;
|
|
if ((ppc_inst_val(jmp[1]) & 0xffff0000) != PPC_RAW_ADDI(_R12, _R12, 0))
|
|
return -EINVAL;
|
|
if (ppc_inst_val(jmp[2]) != PPC_RAW_MTCTR(_R12))
|
|
return -EINVAL;
|
|
if (ppc_inst_val(jmp[3]) != PPC_RAW_BCTR())
|
|
return -EINVAL;
|
|
|
|
addr = (ppc_inst_val(jmp[1]) & 0xffff) | ((ppc_inst_val(jmp[0]) & 0xffff) << 16);
|
|
if (addr & 0x8000)
|
|
addr -= 0x10000;
|
|
|
|
*target = addr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int module_finalize_ftrace(struct module *module, const Elf_Shdr *sechdrs)
|
|
{
|
|
module->arch.tramp = do_plt_call(module->mem[MOD_TEXT].base,
|
|
(unsigned long)ftrace_caller,
|
|
sechdrs, module);
|
|
if (!module->arch.tramp)
|
|
return -ENOENT;
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
|
|
module->arch.tramp_regs = do_plt_call(module->mem[MOD_TEXT].base,
|
|
(unsigned long)ftrace_regs_caller,
|
|
sechdrs, module);
|
|
if (!module->arch.tramp_regs)
|
|
return -ENOENT;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|