linux/drivers/input/touchscreen/migor_ts.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

235 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Touch Screen driver for Renesas MIGO-R Platform
*
* Copyright (c) 2008 Magnus Damm
* Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
* Kenati Technologies Pvt Ltd.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/timer.h>
#define EVENT_PENDOWN 1
#define EVENT_REPEAT 2
#define EVENT_PENUP 3
struct migor_ts_priv {
struct i2c_client *client;
struct input_dev *input;
int irq;
};
static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
0x01, 0x06, 0x07, };
static const u_int8_t migor_ts_dis_seq[17] = { };
static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
struct migor_ts_priv *priv = dev_id;
unsigned short xpos, ypos;
unsigned char event;
u_int8_t buf[16];
/*
* The touch screen controller chip is hooked up to the CPU
* using I2C and a single interrupt line. The interrupt line
* is pulled low whenever someone taps the screen. To deassert
* the interrupt line we need to acknowledge the interrupt by
* communicating with the controller over the slow i2c bus.
*
* Since I2C bus controller may sleep we are using threaded
* IRQ here.
*/
memset(buf, 0, sizeof(buf));
/* Set Index 0 */
buf[0] = 0;
if (i2c_master_send(priv->client, buf, 1) != 1) {
dev_err(&priv->client->dev, "Unable to write i2c index\n");
goto out;
}
/* Now do Page Read */
if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) {
dev_err(&priv->client->dev, "Unable to read i2c page\n");
goto out;
}
ypos = ((buf[9] & 0x03) << 8 | buf[8]);
xpos = ((buf[11] & 0x03) << 8 | buf[10]);
event = buf[12];
switch (event) {
case EVENT_PENDOWN:
case EVENT_REPEAT:
input_report_key(priv->input, BTN_TOUCH, 1);
input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
input_report_abs(priv->input, ABS_Y, xpos);
input_sync(priv->input);
break;
case EVENT_PENUP:
input_report_key(priv->input, BTN_TOUCH, 0);
input_sync(priv->input);
break;
}
out:
return IRQ_HANDLED;
}
static int migor_ts_open(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
struct i2c_client *client = priv->client;
int count;
/* enable controller */
count = i2c_master_send(client, migor_ts_ena_seq,
sizeof(migor_ts_ena_seq));
if (count != sizeof(migor_ts_ena_seq)) {
dev_err(&client->dev, "Unable to enable touchscreen.\n");
return -ENXIO;
}
return 0;
}
static void migor_ts_close(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
struct i2c_client *client = priv->client;
disable_irq(priv->irq);
/* disable controller */
i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
enable_irq(priv->irq);
}
static int migor_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp)
{
struct migor_ts_priv *priv;
struct input_dev *input;
int error;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
input = input_allocate_device();
if (!priv || !input) {
dev_err(&client->dev, "failed to allocate memory\n");
error = -ENOMEM;
goto err_free_mem;
}
priv->client = client;
priv->input = input;
priv->irq = client->irq;
input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input->keybit);
input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
input->name = client->name;
input->id.bustype = BUS_I2C;
input->dev.parent = &client->dev;
input->open = migor_ts_open;
input->close = migor_ts_close;
input_set_drvdata(input, priv);
error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err_free_mem;
}
error = input_register_device(input);
if (error)
goto err_free_irq;
i2c_set_clientdata(client, priv);
device_init_wakeup(&client->dev, 1);
return 0;
err_free_irq:
free_irq(priv->irq, priv);
err_free_mem:
input_free_device(input);
kfree(priv);
return error;
}
static void migor_ts_remove(struct i2c_client *client)
{
struct migor_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
input_unregister_device(priv->input);
kfree(priv);
dev_set_drvdata(&client->dev, NULL);
}
static int __maybe_unused migor_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
return 0;
}
static int __maybe_unused migor_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume);
static const struct i2c_device_id migor_ts_id[] = {
{ "migor_ts", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, migor_ts_id);
static struct i2c_driver migor_ts_driver = {
.driver = {
.name = "migor_ts",
.pm = &migor_ts_pm,
},
.probe = migor_ts_probe,
.remove = migor_ts_remove,
.id_table = migor_ts_id,
};
module_i2c_driver(migor_ts_driver);
MODULE_DESCRIPTION("MigoR Touchscreen driver");
MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
MODULE_LICENSE("GPL");