Andiry Xu 2c44178032 xHCI: Set link state support
This patch adds support for Set Port Feature(PORT_LINK_STATE) request.

The most significant byte (bits 15..8) of the wIndex field specifies
the U state the host software wants to put the link connected to the
port into. This request is only valid when the PORT_ENABLE bit is set
and the PORT_LINK_STATE should not be above value '5' (Rx.Detect).

This request will be later used to replace the set/clear suspend USB3
protocol ports in hub driver.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-02 16:42:52 -07:00
..
2011-03-31 11:26:23 -03:00
2011-04-19 05:50:38 -07:00
2011-04-13 16:50:52 -07:00
2011-03-31 11:26:23 -03:00
2011-03-31 11:26:23 -03:00
2011-03-31 11:26:23 -03:00
2011-03-31 11:26:23 -03:00
2011-03-13 18:07:11 -07:00
2011-03-31 11:26:23 -03:00
2011-03-31 11:26:23 -03:00
2011-03-13 18:07:11 -07:00
2011-03-07 12:15:21 -08:00
2009-06-16 14:17:32 +10:00
2010-11-01 17:01:27 -04:00
2010-08-10 14:35:44 -07:00
2011-03-31 11:26:23 -03:00
2011-03-13 18:07:11 -07:00
2011-04-13 16:36:06 -07:00
2011-05-02 16:42:49 -07:00
2011-05-02 16:42:52 -07:00
2011-05-02 16:42:49 -07:00