7920e0fbce
I got the following OOB report:
BUG: KASAN: slab-out-of-bounds in validate_desc+0xba/0x109
Read of size 8 at addr ffff888107db8ff0 by task python3/253
Call Trace:
<TASK>
dump_stack_lvl+0x67/0x83
print_report+0x178/0x4b0
kasan_report+0x90/0x190
validate_desc+0xba/0x109
gpiod_set_value_cansleep+0x40/0x5a
regulator_ena_gpio_ctrl+0x93/0xfc
_regulator_do_enable.cold.61+0x89/0x163
set_machine_constraints+0x140a/0x159c
regulator_register.cold.73+0x762/0x10cd
devm_regulator_register+0x57/0xb0
rt5759_probe+0x3a0/0x4ac [rt5759_regulator]
The desc used in validate_desc() is passed from 'reg_cfg.ena_gpiod',
which is not initialized. Fix this by initializing 'reg_cfg' to 0.
Fixes: 7b36ddb208
("regulator: rt5759: Add support for Richtek RT5759 DCDC converter")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221116092943.1668326-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
371 lines
9.1 KiB
C
371 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define RT5759_REG_VENDORINFO 0x00
|
|
#define RT5759_REG_FREQ 0x01
|
|
#define RT5759_REG_VSEL 0x02
|
|
#define RT5759_REG_DCDCCTRL 0x03
|
|
#define RT5759_REG_STATUS 0x04
|
|
#define RT5759_REG_DCDCSET 0x05
|
|
#define RT5759A_REG_WDTEN 0x42
|
|
|
|
#define RT5759_TSTEP_MASK GENMASK(3, 2)
|
|
#define RT5759_VSEL_MASK GENMASK(6, 0)
|
|
#define RT5759_DISCHARGE_MASK BIT(3)
|
|
#define RT5759_FPWM_MASK BIT(2)
|
|
#define RT5759_ENABLE_MASK BIT(1)
|
|
#define RT5759_OT_MASK BIT(1)
|
|
#define RT5759_UV_MASK BIT(0)
|
|
#define RT5957_OCLVL_MASK GENMASK(7, 6)
|
|
#define RT5759_OCLVL_SHIFT 6
|
|
#define RT5957_OTLVL_MASK GENMASK(5, 4)
|
|
#define RT5759_OTLVL_SHIFT 4
|
|
#define RT5759A_WDTEN_MASK BIT(1)
|
|
|
|
#define RT5759_MANUFACTURER_ID 0x82
|
|
/* vsel range 0x00 ~ 0x5A */
|
|
#define RT5759_NUM_VOLTS 91
|
|
#define RT5759_MIN_UV 600000
|
|
#define RT5759_STEP_UV 10000
|
|
#define RT5759A_STEP_UV 12500
|
|
#define RT5759_MINSS_TIMEUS 1500
|
|
|
|
#define RT5759_PSKIP_MODE 0
|
|
#define RT5759_FPWM_MODE 1
|
|
|
|
enum {
|
|
CHIP_TYPE_RT5759 = 0,
|
|
CHIP_TYPE_RT5759A,
|
|
CHIP_TYPE_MAX
|
|
};
|
|
|
|
struct rt5759_priv {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct regulator_desc desc;
|
|
unsigned long chip_type;
|
|
};
|
|
|
|
static int rt5759_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mode_val;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
mode_val = 0;
|
|
break;
|
|
case REGULATOR_MODE_FAST:
|
|
mode_val = RT5759_FPWM_MASK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(regmap, RT5759_REG_STATUS, RT5759_FPWM_MASK,
|
|
mode_val);
|
|
}
|
|
|
|
static unsigned int rt5759_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int regval;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, RT5759_REG_DCDCCTRL, ®val);
|
|
if (ret)
|
|
return REGULATOR_MODE_INVALID;
|
|
|
|
if (regval & RT5759_FPWM_MASK)
|
|
return REGULATOR_MODE_FAST;
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int rt5759_get_error_flags(struct regulator_dev *rdev,
|
|
unsigned int *flags)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int status, events = 0;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, RT5759_REG_STATUS, &status);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (status & RT5759_OT_MASK)
|
|
events |= REGULATOR_ERROR_OVER_TEMP;
|
|
|
|
if (status & RT5759_UV_MASK)
|
|
events |= REGULATOR_ERROR_UNDER_VOLTAGE;
|
|
|
|
*flags = events;
|
|
return 0;
|
|
}
|
|
|
|
static int rt5759_set_ocp(struct regulator_dev *rdev, int lim_uA, int severity,
|
|
bool enable)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
int ocp_lvl[] = { 9800000, 10800000, 11800000 };
|
|
unsigned int ocp_regval;
|
|
int i;
|
|
|
|
/* Only support over current protection parameter */
|
|
if (severity != REGULATOR_SEVERITY_PROT)
|
|
return 0;
|
|
|
|
if (enable) {
|
|
/* Default ocp level is 10.8A */
|
|
if (lim_uA == 0)
|
|
lim_uA = 10800000;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ocp_lvl); i++) {
|
|
if (lim_uA <= ocp_lvl[i])
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(ocp_lvl))
|
|
i = ARRAY_SIZE(ocp_lvl) - 1;
|
|
|
|
ocp_regval = i + 1;
|
|
} else
|
|
ocp_regval = 0;
|
|
|
|
return regmap_update_bits(regmap, RT5759_REG_DCDCSET, RT5957_OCLVL_MASK,
|
|
ocp_regval << RT5759_OCLVL_SHIFT);
|
|
}
|
|
|
|
static int rt5759_set_otp(struct regulator_dev *rdev, int lim, int severity,
|
|
bool enable)
|
|
{
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
int otp_lvl[] = { 140, 150, 170 };
|
|
unsigned int otp_regval;
|
|
int i;
|
|
|
|
/* Only support over temperature protection parameter */
|
|
if (severity != REGULATOR_SEVERITY_PROT)
|
|
return 0;
|
|
|
|
if (enable) {
|
|
/* Default otp level is 150'c */
|
|
if (lim == 0)
|
|
lim = 150;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(otp_lvl); i++) {
|
|
if (lim <= otp_lvl[i])
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(otp_lvl))
|
|
i = ARRAY_SIZE(otp_lvl) - 1;
|
|
|
|
otp_regval = i + 1;
|
|
} else
|
|
otp_regval = 0;
|
|
|
|
return regmap_update_bits(regmap, RT5759_REG_DCDCSET, RT5957_OTLVL_MASK,
|
|
otp_regval << RT5759_OTLVL_SHIFT);
|
|
}
|
|
|
|
static const struct regulator_ops rt5759_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.set_mode = rt5759_set_mode,
|
|
.get_mode = rt5759_get_mode,
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
.get_error_flags = rt5759_get_error_flags,
|
|
.set_over_current_protection = rt5759_set_ocp,
|
|
.set_thermal_protection = rt5759_set_otp,
|
|
};
|
|
|
|
static unsigned int rt5759_of_map_mode(unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case RT5759_FPWM_MODE:
|
|
return REGULATOR_MODE_FAST;
|
|
case RT5759_PSKIP_MODE:
|
|
return REGULATOR_MODE_NORMAL;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
static const unsigned int rt5759_ramp_table[] = { 20000, 15000, 10000, 5000 };
|
|
|
|
static int rt5759_regulator_register(struct rt5759_priv *priv)
|
|
{
|
|
struct device_node *np = priv->dev->of_node;
|
|
struct regulator_desc *reg_desc = &priv->desc;
|
|
struct regulator_config reg_cfg;
|
|
struct regulator_dev *rdev;
|
|
int ret;
|
|
|
|
reg_desc->name = "rt5759-buck";
|
|
reg_desc->type = REGULATOR_VOLTAGE;
|
|
reg_desc->owner = THIS_MODULE;
|
|
reg_desc->ops = &rt5759_regulator_ops;
|
|
reg_desc->n_voltages = RT5759_NUM_VOLTS;
|
|
reg_desc->min_uV = RT5759_MIN_UV;
|
|
reg_desc->uV_step = RT5759_STEP_UV;
|
|
reg_desc->vsel_reg = RT5759_REG_VSEL;
|
|
reg_desc->vsel_mask = RT5759_VSEL_MASK;
|
|
reg_desc->enable_reg = RT5759_REG_DCDCCTRL;
|
|
reg_desc->enable_mask = RT5759_ENABLE_MASK;
|
|
reg_desc->active_discharge_reg = RT5759_REG_DCDCCTRL;
|
|
reg_desc->active_discharge_mask = RT5759_DISCHARGE_MASK;
|
|
reg_desc->active_discharge_on = RT5759_DISCHARGE_MASK;
|
|
reg_desc->ramp_reg = RT5759_REG_FREQ;
|
|
reg_desc->ramp_mask = RT5759_TSTEP_MASK;
|
|
reg_desc->ramp_delay_table = rt5759_ramp_table;
|
|
reg_desc->n_ramp_values = ARRAY_SIZE(rt5759_ramp_table);
|
|
reg_desc->enable_time = RT5759_MINSS_TIMEUS;
|
|
reg_desc->of_map_mode = rt5759_of_map_mode;
|
|
|
|
/*
|
|
* RT5759 step uV = 10000
|
|
* RT5759A step uV = 12500
|
|
*/
|
|
if (priv->chip_type == CHIP_TYPE_RT5759A)
|
|
reg_desc->uV_step = RT5759A_STEP_UV;
|
|
|
|
memset(®_cfg, 0, sizeof(reg_cfg));
|
|
reg_cfg.dev = priv->dev;
|
|
reg_cfg.of_node = np;
|
|
reg_cfg.init_data = of_get_regulator_init_data(priv->dev, np, reg_desc);
|
|
reg_cfg.regmap = priv->regmap;
|
|
|
|
rdev = devm_regulator_register(priv->dev, reg_desc, ®_cfg);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(priv->dev, "Failed to register regulator (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt5759_init_device_property(struct rt5759_priv *priv)
|
|
{
|
|
unsigned int val = 0;
|
|
|
|
/*
|
|
* Only RT5759A support external watchdog input
|
|
*/
|
|
if (priv->chip_type != CHIP_TYPE_RT5759A)
|
|
return 0;
|
|
|
|
if (device_property_read_bool(priv->dev, "richtek,watchdog-enable"))
|
|
val = RT5759A_WDTEN_MASK;
|
|
|
|
return regmap_update_bits(priv->regmap, RT5759A_REG_WDTEN,
|
|
RT5759A_WDTEN_MASK, val);
|
|
}
|
|
|
|
static int rt5759_manufacturer_check(struct rt5759_priv *priv)
|
|
{
|
|
unsigned int vendor;
|
|
int ret;
|
|
|
|
ret = regmap_read(priv->regmap, RT5759_REG_VENDORINFO, &vendor);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (vendor != RT5759_MANUFACTURER_ID) {
|
|
dev_err(priv->dev, "vendor info not correct (%d)\n", vendor);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool rt5759_is_accessible_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
struct rt5759_priv *priv = dev_get_drvdata(dev);
|
|
|
|
if (reg <= RT5759_REG_DCDCSET)
|
|
return true;
|
|
|
|
if (priv->chip_type == CHIP_TYPE_RT5759A && reg == RT5759A_REG_WDTEN)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static const struct regmap_config rt5759_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = RT5759A_REG_WDTEN,
|
|
.readable_reg = rt5759_is_accessible_reg,
|
|
.writeable_reg = rt5759_is_accessible_reg,
|
|
};
|
|
|
|
static int rt5759_probe(struct i2c_client *i2c)
|
|
{
|
|
struct rt5759_priv *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->dev = &i2c->dev;
|
|
priv->chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
|
|
i2c_set_clientdata(i2c, priv);
|
|
|
|
priv->regmap = devm_regmap_init_i2c(i2c, &rt5759_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
ret = PTR_ERR(priv->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate regmap (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rt5759_manufacturer_check(priv);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to check device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rt5759_init_device_property(priv);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to init device (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return rt5759_regulator_register(priv);
|
|
}
|
|
|
|
static const struct of_device_id __maybe_unused rt5759_device_table[] = {
|
|
{ .compatible = "richtek,rt5759", .data = (void *)CHIP_TYPE_RT5759 },
|
|
{ .compatible = "richtek,rt5759a", .data = (void *)CHIP_TYPE_RT5759A },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt5759_device_table);
|
|
|
|
static struct i2c_driver rt5759_driver = {
|
|
.driver = {
|
|
.name = "rt5759",
|
|
.of_match_table = of_match_ptr(rt5759_device_table),
|
|
},
|
|
.probe_new = rt5759_probe,
|
|
};
|
|
module_i2c_driver(rt5759_driver);
|
|
|
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
|
MODULE_DESCRIPTION("Richtek RT5759 Regulator Driver");
|
|
MODULE_LICENSE("GPL v2");
|