78b8513b76
As suggested by Arnd Bergmann, the newly added mmc aliases should be board specific, so move them from the general dtsi to the individual boards. For the Engicam-boards this means a split as the core boards contains the emmc while the commit baseboard handles sdmmc and sdio. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-3-heiko@sntech.de
130 lines
2.4 KiB
Plaintext
130 lines
2.4 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Engicam srl
|
|
* Copyright (c) 2020 Amarula Solutions
|
|
* Copyright (c) 2020 Amarula Solutions(India)
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdio;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys"; /* +5V */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&xin32k>;
|
|
clock-names = "ext_clock";
|
|
post-power-on-delay-ms = <80>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
};
|
|
|
|
vcc3v3_btreg: vcc3v3-btreg {
|
|
compatible = "regulator-gpio";
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_enable_h>;
|
|
regulator-name = "btreg-gpio-supply";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
states = <3300000 0x0>;
|
|
};
|
|
|
|
vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_rf_aux_mod";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
xin32k: xin32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "xin32k";
|
|
};
|
|
};
|
|
|
|
&sdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus-width = <4>;
|
|
clock-frequency = <50000000>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&gmac {
|
|
clock_in_out = "output";
|
|
phy-supply = <&vcc_3v3>; /* +3V3_SOM */
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 50000 50000>;
|
|
snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <800>;
|
|
vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
|
|
vqmmc-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy {
|
|
status = "okay";
|
|
|
|
u2phy_host: host-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-0 = <&uart2m1_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb20_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|