e05e45e853
ROC-RK3328-PC is the board inside the portable Firefly Station M1 Geek PC. As a redesign after the ROC-RK3328-CC, it uses TypeC as power input and OTG port, embedded with eMMC 5.1 storage and a SDIO WiFi/BT chip (RTL8723DS). - Rockchip RK3328 SoC - 2/4GB LPDDR3 RAM - 16/32/64/128GB eMMC 5.1 - TF card slot - USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1 (Power/OTG) - HDMI - Gigabit Ethernet - WiFi: RTL8723DS - Audio: RK3328 - Key: Power, Reset, Recovery - LED: POWER, USER - IR Signed-off-by: Levin Du <djw@t-chip.com.cn> Link: https://lore.kernel.org/r/20210709080126.17045-3-djw@t-chip.com.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
111 lines
2.1 KiB
Plaintext
111 lines
2.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "rk3328-roc-cc.dts"
|
|
|
|
/ {
|
|
model = "Firefly ROC-RK3328-PC";
|
|
compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1750000>;
|
|
|
|
/* This button is unpopulated out of the factory. */
|
|
button-recovery {
|
|
label = "Recovery";
|
|
linux,code = <KEY_VENDOR>;
|
|
press-threshold-microvolt = <10000>;
|
|
};
|
|
};
|
|
|
|
ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
linux,rc-map-name = "rc-khadas";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir_int>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
|
|
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&codec {
|
|
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_logic>;
|
|
};
|
|
|
|
&pinctrl {
|
|
ir {
|
|
ir_int: ir-int {
|
|
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdmmcio {
|
|
sdio_per_pin: sdio-per-pin {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
wifi_en: wifi-en {
|
|
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wifi_host_wake: wifi-host-wake {
|
|
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
|
|
};
|
|
|
|
bt_rst: bt-rst {
|
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_en: bt-en {
|
|
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmic_int_l {
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
&rk805 {
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_18>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb20_host_drv {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
&vcc_host1_5v {
|
|
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&vcc_sdio {
|
|
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio_per_pin>;
|
|
};
|