iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm
History
Tony Lindgren 301fe8eeee omap: Disable serial port autoidle by default 
Currently the omap serial clocks are autoidled after 5 seconds.
However, this causes lost characters on the serial ports. As this
is considered non-standard behaviour for Linux, disable the timeout.

Note that this will also cause blocking of any deeper omap sleep
states.

To enable the autoidling of the serial ports, do something like
this for each serial port:

# echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout
# echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout
...

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03 08:48:06 -08:00
..
boot
ARM: 5884/1: arm: Fix DCC console for v7
2010-01-19 20:23:16 +00:00
common
ARM: 5857/1: ARM: dmabounce: fix build
2009-12-22 15:32:32 +00:00
configs
ARM: 5867/1: Update U300 defconfig
2010-01-08 16:14:28 +00:00
include/asm
ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments
2010-01-19 23:11:56 +00:00
kernel
ARM: 5884/1: arm: Fix DCC console for v7
2010-01-19 20:23:16 +00:00
lib
Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6
2009-09-19 13:47:57 +01:00
mach-aaec2000
…
mach-at91
atmel-mci: change use of dma slave interface
2009-12-15 08:53:35 -08:00
mach-bcmring
Merge git://git.infradead.org/mtd-2.6
2009-12-16 10:23:43 -08:00
mach-clps711x
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
2009-12-13 16:33:19 +00:00
mach-davinci
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
2010-01-15 14:51:57 -08:00
mach-dove
ARM: Add Tauros2 L2 cache controller support
2009-11-27 15:43:21 -05:00
mach-ebsa110
…
mach-ep93xx
Input: ep93xx_keypad - update driver to new core support
2009-12-15 08:54:45 -08:00
mach-footbridge
ARM: footbridge: trim down old ISA rtc setup
2009-12-24 13:39:18 +00:00
mach-gemini
ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
2010-01-18 12:44:51 +00:00
mach-h720x
…
mach-integrator
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
2009-12-13 16:33:19 +00:00
mach-iop13xx
Merge branch 'devel-stable' into devel
2009-12-05 10:35:33 +00:00
mach-iop32x
iop: enable generic time
2009-10-29 11:46:55 -07:00
mach-iop33x
iop: enable generic time
2009-10-29 11:46:55 -07:00
mach-ixp4xx
IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
2009-12-05 16:58:41 +01:00
mach-ixp23xx
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
2009-12-13 16:33:19 +00:00
mach-ixp2000
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
2009-12-13 16:33:19 +00:00
mach-kirkwood
[ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
2010-01-10 22:23:43 -05:00
mach-ks8695
ARM: dma-mapping: provide dma_to_page()
2009-11-23 12:53:54 +00:00
mach-l7200
…
mach-lh7a40x
ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes
2010-01-10 00:08:14 +00:00
mach-loki
…
mach-mmp
[ARM] pxa/ttc_dkb: remove duplicate macro definition
2009-12-29 14:11:33 +08:00
mach-msm
HTC Dream: mmc compilation fixes
2009-12-10 10:14:34 -08:00
mach-mv78xx0
[ARM] properly report mv78100 stepping A1
2009-11-05 23:03:19 -05:00
mach-mx1
ARM: mxc: Fix i2c_board_info definitions
2009-08-14 12:40:37 +02:00
mach-mx2
mx27: mxt_td60: Remove not used UART pins
2010-01-04 11:47:43 +01:00
mach-mx3
imx/mx3: depend on USB_ULPI for otg_ulpi_create
2010-01-04 13:26:23 +01:00
mach-mx25
mx25: pdk: add platform code for FEC support
2010-01-04 11:47:44 +01:00
mach-mxc91231
MXC: add iomux pins configuration support for MXC91231
2009-08-14 12:40:47 +02:00
mach-netx
netx: Use get_irqnr_preamble to initialize base register
2009-08-13 20:34:36 +02:00
mach-nomadik
Merge git://git.infradead.org/mtd-2.6
2009-12-16 10:23:43 -08:00
mach-ns9xxx
genirq: Convert irq_desc.lock to raw_spinlock
2009-12-14 23:55:33 +01:00
mach-omap1
OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"
2010-01-20 13:35:28 -07:00
mach-omap2
omap: Disable serial port autoidle by default
2010-02-03 08:48:06 -08:00
mach-orion5x
[ARM] orion5x: D-link DNS-323 rev. B1 power-off
2010-01-24 22:17:51 -05:00
mach-pnx4008
…
mach-pxa
[ARM] pxa: fix irq suspend/resume for pxa25x
2010-01-13 21:01:09 +08:00
mach-realview
ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards
2010-01-11 15:39:21 +00:00
mach-rpc
…
mach-s3c24a0/include/mach
ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
2009-12-13 16:33:19 +00:00
mach-s3c2400
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2009-12-09 19:43:33 -08:00
mach-s3c2410
ARM: S3C24XX: touchscreen device definition
2009-12-23 19:28:12 +00:00
mach-s3c2412
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2009-12-09 19:43:33 -08:00
mach-s3c2440
ARM: MINI2440: Fixup __initdata usage
2010-01-15 17:04:42 +09:00
mach-s3c2442
Merge git://git.infradead.org/battery-2.6
2009-12-15 08:59:33 -08:00
mach-s3c2443
Kconfig: Remove useless and sometimes wrong comments
2009-11-09 09:40:56 +01:00
mach-s3c6400
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2009-12-09 19:43:33 -08:00
mach-s3c6410
hmt: adjust for new pwm_backlight->notify prototype
2010-01-22 09:58:17 +09:00
mach-s5pc100
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2009-12-09 19:43:33 -08:00
mach-sa1100
ARM: fix sa1100 build
2009-12-13 19:38:08 +00:00
mach-shark
…
mach-stmp37xx
[ARM] 5539/1: Freescale STMP: onboard devices declaration
2009-06-04 14:16:45 +01:00
mach-stmp378x
[ARM] 5539/1: Freescale STMP: onboard devices declaration
2009-06-04 14:16:45 +01:00
mach-u300
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
2009-12-16 10:28:56 -08:00
mach-ux500
ARM: 5832/1: ARM: U8500 Makefile.boot
2009-11-28 10:22:52 +00:00
mach-versatile
ARM: 5720/1: Move MMCI header to amba include dir
2009-09-22 20:49:04 +01:00
mach-w90x900
ARM: 5864/1: Implement arch_reset() in NUC900
2010-01-05 20:52:45 +00:00
mm
ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments
2010-01-19 23:11:56 +00:00
nwfpe
ARM: Kill CONFIG_CPU_32
2009-12-18 16:07:53 +00:00
oprofile
ARM: 5849/1: ARMv7: fix Oprofile events count
2009-12-22 15:32:31 +00:00
plat-iop
iop: implement sched_clock()
2009-10-29 11:46:56 -07:00
plat-mxc
ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
2010-01-18 12:44:51 +00:00
plat-nomadik
ARM: 5833/1: ARM nomadik: enable U8500 for common platform
2009-11-28 10:22:53 +00:00
plat-omap
omap: Fix access to already released memory in clk_debugfs_register_one()
2010-02-03 08:48:06 -08:00
plat-orion
[ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
2009-12-28 23:50:49 -05:00
plat-pxa
[ARM] pxa: use resource_size() in pwm.c
2009-12-29 14:11:27 +08:00
plat-s3c
ARM: S3C: NAND: Check the existence of nr_map before copying
2010-01-14 11:25:44 +09:00
plat-s3c24xx
ARM: S3C24XX: touchscreen device definition
2009-12-23 19:28:12 +00:00
plat-s3c64xx
ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains
2010-01-07 11:34:51 +09:00
plat-s5pc1xx
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2009-12-09 19:43:33 -08:00
plat-samsung
ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves
2009-12-01 01:28:37 +00:00
plat-stmp3xxx
ARM: STMP3xxx: deallocation with negative index of descriptors[]
2009-09-19 12:14:05 +01:00
tools
[ARM] Update mach-types
2010-01-28 22:17:45 +00:00
vfp
ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()
2009-12-18 14:53:41 +00:00
Kconfig
ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
2010-02-03 08:48:06 -08:00
Kconfig-nommu
…
Kconfig.debug
Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-12-13 16:35:09 +00:00
Makefile
ARM: fix badly placed mach/plat entries in Kconfig & Makefile
2010-01-17 17:19:56 +00:00