7e3e68bcfd
Instead of using the DTV properties cache directly, pass the get frontend data as an argument. For now, everything should remain the same, but the next patch will prevent get_frontend to affect the global cache. This is needed because several drivers don't care enough to only change the properties if locked. Due to that, calling G_PROPERTY before locking on those drivers will make them to never lock. Ok, those drivers are crap and should never be merged like that, but the core should not rely that the drivers would be doing the right thing. Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
557 lines
14 KiB
C
557 lines
14 KiB
C
/*
|
|
Driver for VES1893 and VES1993 QPSK Demodulators
|
|
|
|
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
|
|
Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
|
|
Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
|
|
Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "ves1x93.h"
|
|
|
|
|
|
struct ves1x93_state {
|
|
struct i2c_adapter* i2c;
|
|
/* configuration settings */
|
|
const struct ves1x93_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
/* previous uncorrected block counter */
|
|
enum fe_spectral_inversion inversion;
|
|
u8 *init_1x93_tab;
|
|
u8 *init_1x93_wtab;
|
|
u8 tab_size;
|
|
u8 demod_type;
|
|
u32 frequency;
|
|
};
|
|
|
|
static int debug;
|
|
#define dprintk if (debug) printk
|
|
|
|
#define DEMOD_VES1893 0
|
|
#define DEMOD_VES1993 1
|
|
|
|
static u8 init_1893_tab [] = {
|
|
0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
|
|
0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
|
|
0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
|
|
0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
|
|
};
|
|
|
|
static u8 init_1993_tab [] = {
|
|
0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
|
|
0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
|
|
0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
|
|
0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
|
|
0x00, 0x00, 0x0e, 0x80, 0x00
|
|
};
|
|
|
|
static u8 init_1893_wtab[] =
|
|
{
|
|
1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
|
|
0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
|
|
1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
|
|
1,1,1,0,1,1
|
|
};
|
|
|
|
static u8 init_1993_wtab[] =
|
|
{
|
|
1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
|
|
0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
|
|
1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
|
|
1,1,1,0,1,1,1,1, 1,1,1,1,1
|
|
};
|
|
|
|
static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
|
|
{
|
|
u8 buf [] = { 0x00, reg, data };
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
|
|
int err;
|
|
|
|
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
|
dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
|
|
{
|
|
int ret;
|
|
u8 b0 [] = { 0x00, reg };
|
|
u8 b1 [] = { 0 };
|
|
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
|
|
|
|
ret = i2c_transfer (state->i2c, msg, 2);
|
|
|
|
if (ret != 2) return ret;
|
|
|
|
return b1[0];
|
|
}
|
|
|
|
static int ves1x93_clr_bit (struct ves1x93_state* state)
|
|
{
|
|
msleep(10);
|
|
ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
|
|
ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
|
|
msleep(50);
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_inversion(struct ves1x93_state *state,
|
|
enum fe_spectral_inversion inversion)
|
|
{
|
|
u8 val;
|
|
|
|
/*
|
|
* inversion on/off are interchanged because i and q seem to
|
|
* be swapped on the hardware
|
|
*/
|
|
|
|
switch (inversion) {
|
|
case INVERSION_OFF:
|
|
val = 0xc0;
|
|
break;
|
|
case INVERSION_ON:
|
|
val = 0x80;
|
|
break;
|
|
case INVERSION_AUTO:
|
|
val = 0x00;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
|
|
}
|
|
|
|
static int ves1x93_set_fec(struct ves1x93_state *state, enum fe_code_rate fec)
|
|
{
|
|
if (fec == FEC_AUTO)
|
|
return ves1x93_writereg (state, 0x0d, 0x08);
|
|
else if (fec < FEC_1_2 || fec > FEC_8_9)
|
|
return -EINVAL;
|
|
else
|
|
return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
|
|
}
|
|
|
|
static enum fe_code_rate ves1x93_get_fec(struct ves1x93_state *state)
|
|
{
|
|
return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
|
|
}
|
|
|
|
static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
|
|
{
|
|
u32 BDR;
|
|
u32 ratio;
|
|
u8 ADCONF, FCONF, FNR, AGCR;
|
|
u32 BDRI;
|
|
u32 tmp;
|
|
u32 FIN;
|
|
|
|
dprintk("%s: srate == %d\n", __func__, (unsigned int) srate);
|
|
|
|
if (srate > state->config->xin/2)
|
|
srate = state->config->xin/2;
|
|
|
|
if (srate < 500000)
|
|
srate = 500000;
|
|
|
|
#define MUL (1UL<<26)
|
|
|
|
FIN = (state->config->xin + 6000) >> 4;
|
|
|
|
tmp = srate << 6;
|
|
ratio = tmp / FIN;
|
|
|
|
tmp = (tmp % FIN) << 8;
|
|
ratio = (ratio << 8) + tmp / FIN;
|
|
|
|
tmp = (tmp % FIN) << 8;
|
|
ratio = (ratio << 8) + tmp / FIN;
|
|
|
|
FNR = 0xff;
|
|
|
|
if (ratio < MUL/3) FNR = 0;
|
|
if (ratio < (MUL*11)/50) FNR = 1;
|
|
if (ratio < MUL/6) FNR = 2;
|
|
if (ratio < MUL/9) FNR = 3;
|
|
if (ratio < MUL/12) FNR = 4;
|
|
if (ratio < (MUL*11)/200) FNR = 5;
|
|
if (ratio < MUL/24) FNR = 6;
|
|
if (ratio < (MUL*27)/1000) FNR = 7;
|
|
if (ratio < MUL/48) FNR = 8;
|
|
if (ratio < (MUL*137)/10000) FNR = 9;
|
|
|
|
if (FNR == 0xff) {
|
|
ADCONF = 0x89;
|
|
FCONF = 0x80;
|
|
FNR = 0;
|
|
} else {
|
|
ADCONF = 0x81;
|
|
FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
|
|
/*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
|
|
}
|
|
|
|
BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
|
|
BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
|
|
|
|
dprintk("FNR= %d\n", FNR);
|
|
dprintk("ratio= %08x\n", (unsigned int) ratio);
|
|
dprintk("BDR= %08x\n", (unsigned int) BDR);
|
|
dprintk("BDRI= %02x\n", (unsigned int) BDRI);
|
|
|
|
if (BDRI > 0xff)
|
|
BDRI = 0xff;
|
|
|
|
ves1x93_writereg (state, 0x06, 0xff & BDR);
|
|
ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
|
|
ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
|
|
|
|
ves1x93_writereg (state, 0x09, BDRI);
|
|
ves1x93_writereg (state, 0x20, ADCONF);
|
|
ves1x93_writereg (state, 0x21, FCONF);
|
|
|
|
AGCR = state->init_1x93_tab[0x05];
|
|
if (state->config->invert_pwm)
|
|
AGCR |= 0x20;
|
|
|
|
if (srate < 6000000)
|
|
AGCR |= 0x80;
|
|
else
|
|
AGCR &= ~0x80;
|
|
|
|
ves1x93_writereg (state, 0x05, AGCR);
|
|
|
|
/* ves1993 hates this, will lose lock */
|
|
if (state->demod_type != DEMOD_VES1993)
|
|
ves1x93_clr_bit (state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_init (struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
int i;
|
|
int val;
|
|
|
|
dprintk("%s: init chip\n", __func__);
|
|
|
|
for (i = 0; i < state->tab_size; i++) {
|
|
if (state->init_1x93_wtab[i]) {
|
|
val = state->init_1x93_tab[i];
|
|
|
|
if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
|
|
ves1x93_writereg (state, i, val);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_13:
|
|
return ves1x93_writereg (state, 0x1f, 0x20);
|
|
case SEC_VOLTAGE_18:
|
|
return ves1x93_writereg (state, 0x1f, 0x30);
|
|
case SEC_VOLTAGE_OFF:
|
|
return ves1x93_writereg (state, 0x1f, 0x00);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ves1x93_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *status)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 sync = ves1x93_readreg (state, 0x0e);
|
|
|
|
/*
|
|
* The ves1893 sometimes returns sync values that make no sense,
|
|
* because, e.g., the SIGNAL bit is 0, while some of the higher
|
|
* bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
|
|
* Tests showed that the VITERBI and SYNC bits are returned
|
|
* reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
|
|
* If such a case occurs, we read the value again, until we get a
|
|
* valid value.
|
|
*/
|
|
int maxtry = 10; /* just for safety - let's not get stuck here */
|
|
while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
|
|
msleep(10);
|
|
sync = ves1x93_readreg (state, 0x0e);
|
|
}
|
|
|
|
*status = 0;
|
|
|
|
if (sync & 1)
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
if (sync & 2)
|
|
*status |= FE_HAS_CARRIER;
|
|
|
|
if (sync & 4)
|
|
*status |= FE_HAS_VITERBI;
|
|
|
|
if (sync & 8)
|
|
*status |= FE_HAS_SYNC;
|
|
|
|
if ((sync & 0x1f) == 0x1f)
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
*ber = ves1x93_readreg (state, 0x15);
|
|
*ber |= (ves1x93_readreg (state, 0x16) << 8);
|
|
*ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
|
|
*ber *= 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 signal = ~ves1x93_readreg (state, 0x0b);
|
|
*strength = (signal << 8) | signal;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 _snr = ~ves1x93_readreg (state, 0x1c);
|
|
*snr = (_snr << 8) | _snr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
*ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
|
|
|
|
if (*ucblocks == 0x7f)
|
|
*ucblocks = 0xffffffff; /* counter overflow... */
|
|
|
|
ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */
|
|
ves1x93_writereg (state, 0x18, 0x80); /* dto. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
ves1x93_set_inversion (state, p->inversion);
|
|
ves1x93_set_fec(state, p->fec_inner);
|
|
ves1x93_set_symbolrate(state, p->symbol_rate);
|
|
state->inversion = p->inversion;
|
|
state->frequency = p->frequency;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_get_frontend(struct dvb_frontend *fe,
|
|
struct dtv_frontend_properties *p)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
int afc;
|
|
|
|
afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
|
|
afc = (afc * (int)(p->symbol_rate/1000/8))/16;
|
|
|
|
p->frequency = state->frequency - afc;
|
|
|
|
/*
|
|
* inversion indicator is only valid
|
|
* if auto inversion was used
|
|
*/
|
|
if (state->inversion == INVERSION_AUTO)
|
|
p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
|
|
INVERSION_OFF : INVERSION_ON;
|
|
p->fec_inner = ves1x93_get_fec(state);
|
|
/* XXX FIXME: timing offset !! */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
return ves1x93_writereg (state, 0x00, 0x08);
|
|
}
|
|
|
|
static void ves1x93_release(struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
return ves1x93_writereg(state, 0x00, 0x11);
|
|
} else {
|
|
return ves1x93_writereg(state, 0x00, 0x01);
|
|
}
|
|
}
|
|
|
|
static struct dvb_frontend_ops ves1x93_ops;
|
|
|
|
struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct ves1x93_state* state = NULL;
|
|
u8 identity;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->inversion = INVERSION_OFF;
|
|
|
|
/* check if the demod is there + identify it */
|
|
identity = ves1x93_readreg(state, 0x1e);
|
|
switch (identity) {
|
|
case 0xdc: /* VES1893A rev1 */
|
|
printk("ves1x93: Detected ves1893a rev1\n");
|
|
state->demod_type = DEMOD_VES1893;
|
|
state->init_1x93_tab = init_1893_tab;
|
|
state->init_1x93_wtab = init_1893_wtab;
|
|
state->tab_size = sizeof(init_1893_tab);
|
|
break;
|
|
|
|
case 0xdd: /* VES1893A rev2 */
|
|
printk("ves1x93: Detected ves1893a rev2\n");
|
|
state->demod_type = DEMOD_VES1893;
|
|
state->init_1x93_tab = init_1893_tab;
|
|
state->init_1x93_wtab = init_1893_wtab;
|
|
state->tab_size = sizeof(init_1893_tab);
|
|
break;
|
|
|
|
case 0xde: /* VES1993 */
|
|
printk("ves1x93: Detected ves1993\n");
|
|
state->demod_type = DEMOD_VES1993;
|
|
state->init_1x93_tab = init_1993_tab;
|
|
state->init_1x93_wtab = init_1993_wtab;
|
|
state->tab_size = sizeof(init_1993_tab);
|
|
break;
|
|
|
|
default:
|
|
goto error;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops ves1x93_ops = {
|
|
.delsys = { SYS_DVBS },
|
|
.info = {
|
|
.name = "VLSI VES1x93 DVB-S",
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
.frequency_stepsize = 125, /* kHz for QPSK frontends */
|
|
.frequency_tolerance = 29500,
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 45000000,
|
|
/* .symbol_rate_tolerance = ???,*/
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK
|
|
},
|
|
|
|
.release = ves1x93_release,
|
|
|
|
.init = ves1x93_init,
|
|
.sleep = ves1x93_sleep,
|
|
.i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
|
|
|
|
.set_frontend = ves1x93_set_frontend,
|
|
.get_frontend = ves1x93_get_frontend,
|
|
|
|
.read_status = ves1x93_read_status,
|
|
.read_ber = ves1x93_read_ber,
|
|
.read_signal_strength = ves1x93_read_signal_strength,
|
|
.read_snr = ves1x93_read_snr,
|
|
.read_ucblocks = ves1x93_read_ucblocks,
|
|
|
|
.set_voltage = ves1x93_set_voltage,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
|
|
MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
|
|
MODULE_AUTHOR("Ralph Metzler");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(ves1x93_attach);
|