linux

iv/linux

History

Hauke Mehrtens 30cfb02301 bcma: init sprom struct earlier

The PCIe host driver and the chip common initialisation accesses the
sprom struct, but it is not initialized when these functions are run.
Move the sprom parsing up in to do it earlier.
As we need the chip common core rev and some other attributes from the
chip common core, the early initialization is done before accessing the
sprom.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2012-10-19 15:52:21 -04:00

bcma_private.h

bcma: detect and register NAND flash device

2012-08-21 16:05:53 -04:00

core.c

bcma: change delays to follow timers-howto guide

2012-09-28 13:54:02 -04:00

driver_chipcommon_nflash.c

bcma: detect and register NAND flash device

2012-08-21 16:05:53 -04:00

driver_chipcommon_pmu.c

bcma: just do the necessary things in early register on SoCs

2012-10-19 15:52:18 -04:00

driver_chipcommon_sflash.c

bcma: detect and register serial flash device

2012-08-21 16:05:52 -04:00

driver_chipcommon.c

bcma: just do the necessary things in early register on SoCs

2012-10-19 15:52:18 -04:00

driver_gmac_cmn.c

bcma: add trivial GBIT MAC COMMON driver

2012-07-12 15:27:18 -04:00

driver_mips.c

bcma: just do the necessary things in early register on SoCs

2012-10-19 15:52:18 -04:00

driver_pci_host.c

bcma: change delays to follow timers-howto guide

2012-09-28 13:54:02 -04:00

driver_pci.c

bcma: change delays to follow timers-howto guide

2012-09-28 13:54:02 -04:00

host_pci.c

bcma: handle BCM43227

2012-09-24 15:02:07 -04:00

host_soc.c

bcma: make some functions static

2012-08-10 15:26:52 -04:00

Kconfig

bcma: detect and register NAND flash device

2012-08-21 16:05:53 -04:00

main.c

bcma: init sprom struct earlier

2012-10-19 15:52:21 -04:00

Makefile

bcma: add place for flash memory support

2012-07-17 15:11:40 -04:00

README

bcma: add Broadcom specific AMBA bus driver

2011-05-10 15:54:54 -04:00

scan.c

bcma: add missing iounmap on error path

2012-07-26 15:37:57 -04:00

scan.h

bcma: fix typo - reading number of slave wrappers

2012-07-12 15:27:17 -04:00

sprom.c

bcma: handle BCM43227

2012-09-24 15:02:07 -04:00

TODO

bcma: add Broadcom specific AMBA bus driver

2011-05-10 15:54:54 -04:00

README

Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
however from programming point of view there is nothing AMBA specific we use.

Standard AMBA drivers are platform specific, have hardcoded addresses and use
AMBA standard fields like CID and PID.

In case of Broadcom's cards every device consists of:
1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
   and PIDs (0x103BB369), but we do not use that info for anything. One of that
   devices is used for managing Broadcom specific core.

Addresses of AMBA devices are not hardcoded in driver and have to be read from
EPROM.

In this situation we decided to introduce separated bus. It can contain up to
16 devices identified by Broadcom specific fields: manufacturer, id, revision
and class.