linux/sound/soc/codecs/cs-amp-lib.c
Simon Trimmer e2d7ad717a
ASoC: cs-amp-lib: Check for no firmware controls when writing calibration
When a wmfw file has not been loaded the firmware control descriptions
necessary to write a stored calibration are not present. In this case
print a more descriptive error message.

The message is logged at info level because it is not fatal, and does
not necessarily imply that anything is broken.

Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240325144450.293630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-25 16:37:09 +00:00

283 lines
8.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
//
// Common code for Cirrus Logic Smart Amplifiers
//
// Copyright (C) 2024 Cirrus Logic, Inc. and
// Cirrus Logic International Semiconductor Ltd.
#include <asm/byteorder.h>
#include <kunit/static_stub.h>
#include <linux/dev_printk.h>
#include <linux/efi.h>
#include <linux/firmware/cirrus/cs_dsp.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <sound/cs-amp-lib.h>
#define CS_AMP_CAL_GUID \
EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3)
#define CS_AMP_CAL_NAME L"CirrusSmartAmpCalibrationData"
static int cs_amp_write_cal_coeff(struct cs_dsp *dsp,
const struct cirrus_amp_cal_controls *controls,
const char *ctl_name, u32 val)
{
struct cs_dsp_coeff_ctl *cs_ctl;
__be32 beval = cpu_to_be32(val);
int ret;
KUNIT_STATIC_STUB_REDIRECT(cs_amp_write_cal_coeff, dsp, controls, ctl_name, val);
if (IS_REACHABLE(CONFIG_FW_CS_DSP)) {
mutex_lock(&dsp->pwr_lock);
cs_ctl = cs_dsp_get_ctl(dsp, ctl_name, controls->mem_region, controls->alg_id);
ret = cs_dsp_coeff_write_ctrl(cs_ctl, 0, &beval, sizeof(beval));
mutex_unlock(&dsp->pwr_lock);
if (ret < 0) {
dev_err(dsp->dev, "Failed to write to '%s': %d\n", ctl_name, ret);
return ret;
}
return 0;
}
return -ENODEV;
}
static int _cs_amp_write_cal_coeffs(struct cs_dsp *dsp,
const struct cirrus_amp_cal_controls *controls,
const struct cirrus_amp_cal_data *data)
{
int ret;
dev_dbg(dsp->dev, "Calibration: Ambient=%#x, Status=%#x, CalR=%d\n",
data->calAmbient, data->calStatus, data->calR);
if (list_empty(&dsp->ctl_list)) {
dev_info(dsp->dev, "Calibration disabled due to missing firmware controls\n");
return -ENOENT;
}
ret = cs_amp_write_cal_coeff(dsp, controls, controls->ambient, data->calAmbient);
if (ret)
return ret;
ret = cs_amp_write_cal_coeff(dsp, controls, controls->calr, data->calR);
if (ret)
return ret;
ret = cs_amp_write_cal_coeff(dsp, controls, controls->status, data->calStatus);
if (ret)
return ret;
ret = cs_amp_write_cal_coeff(dsp, controls, controls->checksum, data->calR + 1);
if (ret)
return ret;
return 0;
}
/**
* cs_amp_write_cal_coeffs - Write calibration data to firmware controls.
* @dsp: Pointer to struct cs_dsp.
* @controls: Pointer to definition of firmware controls to be written.
* @data: Pointer to calibration data.
*
* Returns: 0 on success, else negative error value.
*/
int cs_amp_write_cal_coeffs(struct cs_dsp *dsp,
const struct cirrus_amp_cal_controls *controls,
const struct cirrus_amp_cal_data *data)
{
if (IS_REACHABLE(CONFIG_FW_CS_DSP) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST))
return _cs_amp_write_cal_coeffs(dsp, controls, data);
else
return -ENODEV;
}
EXPORT_SYMBOL_NS_GPL(cs_amp_write_cal_coeffs, SND_SOC_CS_AMP_LIB);
static efi_status_t cs_amp_get_efi_variable(efi_char16_t *name,
efi_guid_t *guid,
unsigned long *size,
void *buf)
{
u32 attr;
KUNIT_STATIC_STUB_REDIRECT(cs_amp_get_efi_variable, name, guid, size, buf);
if (IS_ENABLED(CONFIG_EFI))
return efi.get_variable(name, guid, &attr, size, buf);
return EFI_NOT_FOUND;
}
static struct cirrus_amp_efi_data *cs_amp_get_cal_efi_buffer(struct device *dev)
{
struct cirrus_amp_efi_data *efi_data;
unsigned long data_size = 0;
u8 *data;
efi_status_t status;
int ret;
/* Get real size of UEFI variable */
status = cs_amp_get_efi_variable(CS_AMP_CAL_NAME, &CS_AMP_CAL_GUID, &data_size, NULL);
if (status != EFI_BUFFER_TOO_SMALL)
return ERR_PTR(-ENOENT);
if (data_size < sizeof(*efi_data)) {
dev_err(dev, "EFI cal variable truncated\n");
return ERR_PTR(-EOVERFLOW);
}
/* Get variable contents into buffer */
data = kmalloc(data_size, GFP_KERNEL);
if (!data)
return ERR_PTR(-ENOMEM);
status = cs_amp_get_efi_variable(CS_AMP_CAL_NAME, &CS_AMP_CAL_GUID, &data_size, data);
if (status != EFI_SUCCESS) {
ret = -EINVAL;
goto err;
}
efi_data = (struct cirrus_amp_efi_data *)data;
dev_dbg(dev, "Calibration: Size=%d, Amp Count=%d\n", efi_data->size, efi_data->count);
if ((efi_data->count > 128) ||
offsetof(struct cirrus_amp_efi_data, data[efi_data->count]) > data_size) {
dev_err(dev, "EFI cal variable truncated\n");
ret = -EOVERFLOW;
goto err;
}
return efi_data;
err:
kfree(data);
dev_err(dev, "Failed to read calibration data from EFI: %d\n", ret);
return ERR_PTR(ret);
}
static u64 cs_amp_cal_target_u64(const struct cirrus_amp_cal_data *data)
{
return ((u64)data->calTarget[1] << 32) | data->calTarget[0];
}
static int _cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index,
struct cirrus_amp_cal_data *out_data)
{
struct cirrus_amp_efi_data *efi_data;
struct cirrus_amp_cal_data *cal = NULL;
int i, ret;
efi_data = cs_amp_get_cal_efi_buffer(dev);
if (IS_ERR(efi_data))
return PTR_ERR(efi_data);
if (target_uid) {
for (i = 0; i < efi_data->count; ++i) {
u64 cal_target = cs_amp_cal_target_u64(&efi_data->data[i]);
/* Skip entries with unpopulated silicon ID */
if (cal_target == 0)
continue;
if (cal_target == target_uid) {
cal = &efi_data->data[i];
break;
}
}
}
if (!cal && (amp_index >= 0) && (amp_index < efi_data->count)) {
u64 cal_target = cs_amp_cal_target_u64(&efi_data->data[amp_index]);
/*
* Treat unpopulated cal_target as a wildcard.
* If target_uid != 0 we can only get here if cal_target == 0
* or it didn't match any cal_target value.
* If target_uid == 0 it is a wildcard.
*/
if ((cal_target == 0) || (target_uid == 0))
cal = &efi_data->data[amp_index];
else
dev_warn(dev, "Calibration entry %d does not match silicon ID", amp_index);
}
if (cal) {
memcpy(out_data, cal, sizeof(*out_data));
ret = 0;
} else {
dev_warn(dev, "No calibration for silicon ID %#llx\n", target_uid);
ret = -ENOENT;
}
kfree(efi_data);
return ret;
}
/**
* cs_amp_get_efi_calibration_data - get an entry from calibration data in EFI.
* @dev: struct device of the caller.
* @target_uid: UID to match, or zero to ignore UID matching.
* @amp_index: Entry index to use, or -1 to prevent lookup by index.
* @out_data: struct cirrus_amp_cal_data where the entry will be copied.
*
* This function can perform 3 types of lookup:
*
* (target_uid > 0, amp_index >= 0)
* UID search with fallback to using the array index.
* Search the calibration data for a non-zero calTarget that matches
* target_uid, and if found return that entry. Else, if the entry at
* [amp_index] has calTarget == 0, return that entry. Else fail.
*
* (target_uid > 0, amp_index < 0)
* UID search only.
* Search the calibration data for a non-zero calTarget that matches
* target_uid, and if found return that entry. Else fail.
*
* (target_uid == 0, amp_index >= 0)
* Array index fetch only.
* Return the entry at [amp_index].
*
* An array lookup will be skipped if amp_index exceeds the number of
* entries in the calibration array, and in this case the return will
* be -ENOENT. An out-of-range amp_index does not prevent matching by
* target_uid - it has the same effect as passing amp_index < 0.
*
* If the EFI data is too short to be a valid entry, or the entry count
* in the EFI data overflows the actual length of the data, this function
* returns -EOVERFLOW.
*
* Return: 0 if the entry was found, -ENOENT if no entry was found,
* -EOVERFLOW if the EFI file is corrupt, else other error value.
*/
int cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index,
struct cirrus_amp_cal_data *out_data)
{
if (IS_ENABLED(CONFIG_EFI) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST))
return _cs_amp_get_efi_calibration_data(dev, target_uid, amp_index, out_data);
else
return -ENOENT;
}
EXPORT_SYMBOL_NS_GPL(cs_amp_get_efi_calibration_data, SND_SOC_CS_AMP_LIB);
static const struct cs_amp_test_hooks cs_amp_test_hook_ptrs = {
.get_efi_variable = cs_amp_get_efi_variable,
.write_cal_coeff = cs_amp_write_cal_coeff,
};
const struct cs_amp_test_hooks * const cs_amp_test_hooks =
PTR_IF(IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST), &cs_amp_test_hook_ptrs);
EXPORT_SYMBOL_NS_GPL(cs_amp_test_hooks, SND_SOC_CS_AMP_LIB);
MODULE_DESCRIPTION("Cirrus Logic amplifier library");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(FW_CS_DSP);