linux/arch/x86/kernel/pci-dma.c
Robin Murphy f07d141fe9 dma-mapping: Generalise dma_32bit_limit flag
Whilst the notion of an upstream DMA restriction is most commonly seen
in PCI host bridges saddled with a 32-bit native interface, a more
general version of the same issue can exist on complex SoCs where a bus
or point-to-point interconnect link from a device's DMA master interface
to another component along the path to memory (often an IOMMU) may carry
fewer address bits than the interfaces at both ends nominally support.
In order to properly deal with this, the first step is to expand the
dma_32bit_limit flag into an arbitrary mask.

To minimise the impact on existing code, we'll make sure to only
consider this new mask valid if set. That makes sense anyway, since a
mask of zero would represent DMA not being wired up at all, and that
would be better handled by not providing valid ops in the first place.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27 19:01:04 +02:00

192 lines
4.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/dma-direct.h>
#include <linux/dma-debug.h>
#include <linux/dmar.h>
#include <linux/export.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
#include <linux/pci.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/x86_init.h>
#include <asm/iommu_table.h>
static bool disable_dac_quirk __read_mostly;
const struct dma_map_ops *dma_ops = &dma_direct_ops;
EXPORT_SYMBOL(dma_ops);
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
#else
int panic_on_overflow __read_mostly = 0;
int force_iommu __read_mostly = 0;
#endif
int iommu_merge __read_mostly = 0;
int no_iommu __read_mostly;
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
/*
* This variable becomes 1 if iommu=pt is passed on the kernel command line.
* If this variable is 1, IOMMU implementations do no DMA translation for
* devices and allow every device to access to whole physical memory. This is
* useful if a user wants to use an IOMMU only for KVM device assignment to
* guests and not for driver dma translation.
*/
int iommu_pass_through __read_mostly;
extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
/* Dummy device used for NULL arguments (normally ISA). */
struct device x86_dma_fallback_dev = {
.init_name = "fallback device",
.coherent_dma_mask = ISA_DMA_BIT_MASK,
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
void __init pci_iommu_alloc(void)
{
struct iommu_table_entry *p;
sort_iommu_table(__iommu_table, __iommu_table_end);
check_iommu_entries(__iommu_table, __iommu_table_end);
for (p = __iommu_table; p < __iommu_table_end; p++) {
if (p && p->detect && p->detect() > 0) {
p->flags |= IOMMU_DETECTED;
if (p->early_init)
p->early_init();
if (p->flags & IOMMU_FINISH_IF_DETECTED)
break;
}
}
}
bool arch_dma_alloc_attrs(struct device **dev)
{
if (!*dev)
*dev = &x86_dma_fallback_dev;
if (!is_device_dma_capable(*dev))
return false;
return true;
}
EXPORT_SYMBOL(arch_dma_alloc_attrs);
/*
* See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
* parameter documentation.
*/
static __init int iommu_setup(char *p)
{
iommu_merge = 1;
if (!p)
return -EINVAL;
while (*p) {
if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
if (!strncmp(p, "force", 5))
force_iommu = 1;
if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
if (!strncmp(p, "biomerge", 8)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
if (!strncmp(p, "forcesac", 8))
pr_warn("forcesac option ignored.\n");
if (!strncmp(p, "allowdac", 8))
pr_warn("allowdac option ignored.\n");
if (!strncmp(p, "nodac", 5))
pr_warn("nodac option ignored.\n");
if (!strncmp(p, "usedac", 6)) {
disable_dac_quirk = true;
return 1;
}
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
if (!strncmp(p, "pt", 2))
iommu_pass_through = 1;
gart_parse_options(p);
#ifdef CONFIG_CALGARY_IOMMU
if (!strncmp(p, "calgary", 7))
use_calgary = 1;
#endif /* CONFIG_CALGARY_IOMMU */
p += strcspn(p, ",");
if (*p == ',')
++p;
}
return 0;
}
early_param("iommu", iommu_setup);
static int __init pci_iommu_init(void)
{
struct iommu_table_entry *p;
#ifdef CONFIG_PCI
dma_debug_add_bus(&pci_bus_type);
#endif
x86_init.iommu.iommu_init();
for (p = __iommu_table; p < __iommu_table_end; p++) {
if (p && (p->flags & IOMMU_DETECTED) && p->late_init)
p->late_init();
}
return 0;
}
/* Must execute after PCI subsystem */
rootfs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
static int via_no_dac_cb(struct pci_dev *pdev, void *data)
{
pdev->dev.bus_dma_mask = DMA_BIT_MASK(32);
return 0;
}
static void via_no_dac(struct pci_dev *dev)
{
if (!disable_dac_quirk) {
dev_info(&dev->dev, "disabling DAC on VIA PCI bridge\n");
pci_walk_bus(dev->subordinate, via_no_dac_cb, NULL);
}
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
PCI_CLASS_BRIDGE_PCI, 8, via_no_dac);
#endif