Heiner Kallweit 079306e979 staging: fbtft: add adriver for SH1106
This patch adds support for the SH1106 OLED controller chip.

It's similar to the SSD1306, however it supports only a subset of
commands and the internal video memory has a different width.

Major differences:
- Internal video memory has a width of 132 pixels
- Only a subset of commands is supported
- Only page addressing mode is supported, no support for vertical and
  horizontal addressing
- SPI frequency limited to 2 MHz according to the datasheet

Successfully tested with a 1.3" OLED display with this chip and
SPI interface.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-06 09:17:08 +01:00
..
2017-03-06 09:17:08 +01:00

  FBTFT
=========

Linux Framebuffer drivers for small TFT LCD display modules.
The module 'fbtft' makes writing drivers for some of these displays very easy.

Development is done on a Raspberry Pi running the Raspbian "wheezy" distribution.

INSTALLATION
  Download kernel sources

  From Linux 3.15
    cd drivers/video/fbdev/fbtft
    git clone https://github.com/notro/fbtft.git

    Add to drivers/video/fbdev/Kconfig:   source "drivers/video/fbdev/fbtft/Kconfig"
    Add to drivers/video/fbdev/Makefile:  obj-y += fbtft/

  Before Linux 3.15
    cd drivers/video
    git clone https://github.com/notro/fbtft.git

    Add to drivers/video/Kconfig:   source "drivers/video/fbtft/Kconfig"
    Add to drivers/video/Makefile:  obj-y += fbtft/

  Enable driver(s) in menuconfig and build the kernel


See wiki for more information: https://github.com/notro/fbtft/wiki


Source: https://github.com/notro/fbtft/