linux/drivers/iio/proximity/sx9324.c
Greg Kroah-Hartman 2a3c8f8a44 IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
 safety alignment issue identified due to improved understanding of
 the restrictions as a result of Catalin Marinas' efforts in that area.
 
 One immutable branch in here due to MFD and SPMI elements needed for
 the qcom-rradc driver.
 
 Device support
 * bmi088
   - Add support for bmi085 (accelerometer part of IMU)
   - Add support for bmi090l (accelerometer part of IMU)
 * mcp4922
   - Add support for single channel device MCP4921
 * rzg2l-adc
   - Add compatible and minor tweaks to support RZ/G2UL ADC
 * sca3300
   - Add support for scl3300 including refactoring driver to support
     multiple device types and cleanup noticed whilst working on driver.
 * spmi-rradc
   - New driver for Qualcomm SPMI Round Robin ADC including necessary
     additional utility functions in SPMI core and related MFD driver.
 * ti-dac55781
   - Add compatible for DAC121C081 which is very similar to existing parts.
 
 Features
 * core
   - Warn on iio_trigger_get() on an unregistered IIO trigger.
 * bma400
   - Triggered buffer support
   - Activity and step counting
   - Misc driver improvements such as devm and header ordering
 * cm32181
   - Add PM support.
 * cros_ec
   - Sensor location support
 * sx9324
   - Add precharge resistor setting
   - Add internal compensation resistor setting
   - Add CS idle/sleep mode.
 * sx9360
   - Add precharge resistor setting
 * vl53l0x
   - Handle reset GPIO, regulator and relax handling of irq type.
 
 Cleanup and minor fixes:
 
 Treewide changes
 - Cleanup of error handling in remove functions in many drivers.
 - Update dt-binding maintainers for a number of ADI bindings.
 - Several sets of conversion of drivers from device tree specific to
   generic device properties. Includes fixing up various related
   header and Kconfig issues.
 - Drop include of of.h from iio.h and fix up drivers that need to include
   it directly.
 - More moves of clusters of drivers into appropriate IIO_XXX namespaces.
 - Tree wide fix of a long running bug around DMA safety requirements.
   IIO was using __cacheline_aligned to pad iio_priv() structures. This
   worked for a long time by coincidence, but correct alignment is
   ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
   an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
   than every driver in future. Note, there have been no reports of this
   bug in the wild, and it may not happen on any platforms supported by
   upstream, so no rush to backport these fixes.
 
 Other cleanup
 * core
   - Switch to ida_alloc()/free()
   - Drop unused iio_get_time_res()
   - Octal permissions and DEVICE_ATTR_* macros.
   - Cleanup bared unsigned usage.
 * MAINTAINERS
   - Add include/dt-bindings/iio/ to the main IIO entry.
 * ad5380
   - Comment syntax fix.
 * ad74413r
   - Call to for_each_set_bit_from(), with from value as 0 replaced.
 * ad7768-1
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * adxl345
   - Fix wrong address in dt-binding example.
 * adxl367
   - Drop extra update of FIFO watermark.
 * at91-sama5d2
   - Limit requested watermark to the hwfifo size.
 * bmg160, bme680
   - Typos
 * cio-dac
   - Switch to iomap rather than direct use of ioports
 * kxsd9
   - Replace CONFIG_PM guards with new PM macros that let the compiler
     cleanly remove the unused code and structures when !CONFIG_PM
 * lsm6dsx
   - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
     to Namespace.
 * meson_saradc - general cleanup.
   - Avoid attaching resources to iio_dev->dev
   - Use same struct device for all error messages
   - Convert to dev_err_probe() and use local struct device *dev to
     reduce code complexity.
   - Use devm_clk_get_optional() instead of hand rolling.
   - Use regmap_read_poll_timeout() instead of hand rolling.
 * mma7660
   - Drop ACPI_PTR() use that is unhelpful.
 * mpu3050
   - Stop exporting symbols not used outside of module
   - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
 * ping
   - Typo fix
 * qcom-spmi-rradc
   - Typo fix
 * sc27xx
   - Convert to generic struct u32_fract
 * srf08
   - Drop a redundant check on !val
 * st_lsm6dsx
   - Limit the requested watermark to the hwfifo size.
 * stm32-adc
   - Use generic_handle_domain_irq() instead of opencoding.
   - Fix handling of ADC disable.
 * stm32-dac
   - Use str_enabled_disable() instead of open coding.
 * stx104
   - Switch to iomap rather than direct use of ioports
 * tsc2046
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * tsl2563
   - Replace flush_scheduled_work() with cancel_delayed_work_sync()
   - Replace cancel_delayed_work() with cancel_delayed_work_sync()
 * vl53l0x
   - Make the VDD regulator optional by allowing a dummy regulator.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmLQBwARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohMHRAAi3nPM3IchXe886olumRgX5ke75vU+FNT
 sqQjqlpl6X7j5yNLU+HF6lC7zg3QzDnfWJ3Uo4C7s2sW7zO0997lkFx4jvF3yW9y
 0nLDgYm1Y1te/qR84BE355pMEsYEJVZyPI/Z8UfuBh6IfnSDeTE5ZwCvlRMAchtp
 AX+j1114FQvZ8yfdIlFjlN4vYSxCGgEZzfWYhpch/Jv1y2Q0L17bpv/KWGt1AYaF
 VugmKoNTM3WzIABBNGWQ4l4ZVVuVpuiVUL90AKv6Qf+yDSqw94tuIM0NZpJ1rqLr
 7tH568m7Eewh7zBp88PRB9XDiZVERvzdVQaT22+wlX+Vhn/SKeoK8PPpdLWD1YyG
 hXB0p+FGKncoKKgK1w9L7qRRNmsQDHowNHYMSjnzeBuyGQyEqwAXzNvvbiCqHh8y
 7b8GW+CYo7//wIarg74Xl+/4LwdCGcMUJNuTm1efEgC7yGToY7JD63DNo3sylaII
 bfoT06/yogaay/rVLZs5n+MvDONaDt4AbTTErG48s0TzqD/O8Ys85AF0IvKwQ80N
 WMxe4y+gdJ6VuU+ww9+6WdUzxnx+5gt+ZA2iLxZFekOIUi3Tj+q47F+17Jvwyt7U
 2wQzdtvNhHPwD5CqYpxD4iH/z5YFCtIHKjmUsVyAWGVbeuSS/QvFzpf39YWxBWO+
 W1w6RStUbXo=
 =IcsE
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features and minor fixes for 5.20

Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.

One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.

Device support
* bmi088
  - Add support for bmi085 (accelerometer part of IMU)
  - Add support for bmi090l (accelerometer part of IMU)
* mcp4922
  - Add support for single channel device MCP4921
* rzg2l-adc
  - Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
  - Add support for scl3300 including refactoring driver to support
    multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
  - New driver for Qualcomm SPMI Round Robin ADC including necessary
    additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
  - Add compatible for DAC121C081 which is very similar to existing parts.

Features
* core
  - Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
  - Triggered buffer support
  - Activity and step counting
  - Misc driver improvements such as devm and header ordering
* cm32181
  - Add PM support.
* cros_ec
  - Sensor location support
* sx9324
  - Add precharge resistor setting
  - Add internal compensation resistor setting
  - Add CS idle/sleep mode.
* sx9360
  - Add precharge resistor setting
* vl53l0x
  - Handle reset GPIO, regulator and relax handling of irq type.

Cleanup and minor fixes:

Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
  generic device properties. Includes fixing up various related
  header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
  it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
  IIO was using __cacheline_aligned to pad iio_priv() structures. This
  worked for a long time by coincidence, but correct alignment is
  ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
  an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
  than every driver in future. Note, there have been no reports of this
  bug in the wild, and it may not happen on any platforms supported by
  upstream, so no rush to backport these fixes.

Other cleanup
* core
  - Switch to ida_alloc()/free()
  - Drop unused iio_get_time_res()
  - Octal permissions and DEVICE_ATTR_* macros.
  - Cleanup bared unsigned usage.
* MAINTAINERS
  - Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
  - Comment syntax fix.
* ad74413r
  - Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
  - Fix wrong address in dt-binding example.
* adxl367
  - Drop extra update of FIFO watermark.
* at91-sama5d2
  - Limit requested watermark to the hwfifo size.
* bmg160, bme680
  - Typos
* cio-dac
  - Switch to iomap rather than direct use of ioports
* kxsd9
  - Replace CONFIG_PM guards with new PM macros that let the compiler
    cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
  - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
    to Namespace.
* meson_saradc - general cleanup.
  - Avoid attaching resources to iio_dev->dev
  - Use same struct device for all error messages
  - Convert to dev_err_probe() and use local struct device *dev to
    reduce code complexity.
  - Use devm_clk_get_optional() instead of hand rolling.
  - Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
  - Drop ACPI_PTR() use that is unhelpful.
* mpu3050
  - Stop exporting symbols not used outside of module
  - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
  - Typo fix
* qcom-spmi-rradc
  - Typo fix
* sc27xx
  - Convert to generic struct u32_fract
* srf08
  - Drop a redundant check on !val
* st_lsm6dsx
  - Limit the requested watermark to the hwfifo size.
* stm32-adc
  - Use generic_handle_domain_irq() instead of opencoding.
  - Fix handling of ADC disable.
* stm32-dac
  - Use str_enabled_disable() instead of open coding.
* stx104
  - Switch to iomap rather than direct use of ioports
* tsc2046
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
  - Replace flush_scheduled_work() with cancel_delayed_work_sync()
  - Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
  - Make the VDD regulator optional by allowing a dummy regulator.

* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
  iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
  iio: adc: xilinx-xadc: Make use of device properties
  iio: light: cm32181: Add PM support
  iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: stm32-adc: disable adc before calibration
  iio: adc: stm32-adc: make safe adc disable
  iio: dac: ad5380: align '*' each line and drop unneeded blank line
  iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  iio: Don't use bare "unsigned"
  dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  iio: dac: mcp4922: add support to mcp4921
  iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  iio: adc: stm32-adc: Use generic_handle_domain_irq()
  proximity: vl53l0x: Make VDD regulator actually optional
  MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  iio: gyro: bmg160: Fix typo in comment
  ...
2022-07-14 15:04:49 +02:00

1160 lines
33 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2021 Google LLC.
*
* Driver for Semtech's SX9324 capacitive proximity/button solution.
* Based on SX9324 driver and copy of datasheet at:
* https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
*/
#include <linux/acpi.h>
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include "sx_common.h"
/* Register definitions. */
#define SX9324_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC
#define SX9324_REG_STAT0 0x01
#define SX9324_REG_STAT1 0x02
#define SX9324_REG_STAT2 0x03
#define SX9324_REG_STAT2_COMPSTAT_MASK GENMASK(3, 0)
#define SX9324_REG_STAT3 0x04
#define SX9324_REG_IRQ_MSK 0x05
#define SX9324_CONVDONE_IRQ BIT(3)
#define SX9324_FAR_IRQ BIT(5)
#define SX9324_CLOSE_IRQ BIT(6)
#define SX9324_REG_IRQ_CFG0 0x06
#define SX9324_REG_IRQ_CFG1 0x07
#define SX9324_REG_IRQ_CFG1_FAILCOND 0x80
#define SX9324_REG_IRQ_CFG2 0x08
#define SX9324_REG_GNRL_CTRL0 0x10
#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK GENMASK(4, 0)
#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS 0x16
#define SX9324_REG_GNRL_CTRL1 0x11
#define SX9324_REG_GNRL_CTRL1_PHEN_MASK GENMASK(3, 0)
#define SX9324_REG_GNRL_CTRL1_PAUSECTRL 0x20
#define SX9324_REG_I2C_ADDR 0x14
#define SX9324_REG_CLK_SPRD 0x15
#define SX9324_REG_AFE_CTRL0 0x20
#define SX9324_REG_AFE_CTRL0_RINT_SHIFT 6
#define SX9324_REG_AFE_CTRL0_RINT_MASK \
GENMASK(SX9324_REG_AFE_CTRL0_RINT_SHIFT + 1, \
SX9324_REG_AFE_CTRL0_RINT_SHIFT)
#define SX9324_REG_AFE_CTRL0_RINT_LOWEST 0x00
#define SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT 4
#define SX9324_REG_AFE_CTRL0_CSIDLE_MASK \
GENMASK(SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT + 1, \
SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT)
#define SX9324_REG_AFE_CTRL0_RINT_LOWEST 0x00
#define SX9324_REG_AFE_CTRL1 0x21
#define SX9324_REG_AFE_CTRL2 0x22
#define SX9324_REG_AFE_CTRL3 0x23
#define SX9324_REG_AFE_CTRL4 0x24
#define SX9324_REG_AFE_CTRL4_FREQ_83_33HZ 0x40
#define SX9324_REG_AFE_CTRL4_RESOLUTION_MASK GENMASK(2, 0)
#define SX9324_REG_AFE_CTRL4_RES_100 0x04
#define SX9324_REG_AFE_CTRL5 0x25
#define SX9324_REG_AFE_CTRL6 0x26
#define SX9324_REG_AFE_CTRL7 0x27
#define SX9324_REG_AFE_PH0 0x28
#define SX9324_REG_AFE_PH0_PIN_MASK(_pin) \
GENMASK(2 * (_pin) + 1, 2 * (_pin))
#define SX9324_REG_AFE_PH1 0x29
#define SX9324_REG_AFE_PH2 0x2a
#define SX9324_REG_AFE_PH3 0x2b
#define SX9324_REG_AFE_CTRL8 0x2c
#define SX9324_REG_AFE_CTRL8_RESERVED 0x10
#define SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM 0x02
#define SX9324_REG_AFE_CTRL8_RESFILTIN_MASK GENMASK(3, 0)
#define SX9324_REG_AFE_CTRL9 0x2d
#define SX9324_REG_AFE_CTRL9_AGAIN_MASK GENMASK(3, 0)
#define SX9324_REG_AFE_CTRL9_AGAIN_1 0x08
#define SX9324_REG_PROX_CTRL0 0x30
#define SX9324_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3)
#define SX9324_REG_PROX_CTRL0_GAIN_SHIFT 3
#define SX9324_REG_PROX_CTRL0_GAIN_RSVD 0x0
#define SX9324_REG_PROX_CTRL0_GAIN_1 0x1
#define SX9324_REG_PROX_CTRL0_GAIN_8 0x4
#define SX9324_REG_PROX_CTRL0_RAWFILT_MASK GENMASK(2, 0)
#define SX9324_REG_PROX_CTRL0_RAWFILT_1P50 0x01
#define SX9324_REG_PROX_CTRL1 0x31
#define SX9324_REG_PROX_CTRL2 0x32
#define SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K 0x20
#define SX9324_REG_PROX_CTRL3 0x33
#define SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES 0x40
#define SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K 0x20
#define SX9324_REG_PROX_CTRL4 0x34
#define SX9324_REG_PROX_CTRL4_AVGNEGFILT_MASK GENMASK(5, 3)
#define SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 0x08
#define SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK GENMASK(2, 0)
#define SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 0x04
#define SX9324_REG_PROX_CTRL5 0x35
#define SX9324_REG_PROX_CTRL5_HYST_MASK GENMASK(5, 4)
#define SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK GENMASK(3, 2)
#define SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK GENMASK(1, 0)
#define SX9324_REG_PROX_CTRL6 0x36
#define SX9324_REG_PROX_CTRL6_PROXTHRESH_32 0x08
#define SX9324_REG_PROX_CTRL7 0x37
#define SX9324_REG_ADV_CTRL0 0x40
#define SX9324_REG_ADV_CTRL1 0x41
#define SX9324_REG_ADV_CTRL2 0x42
#define SX9324_REG_ADV_CTRL3 0x43
#define SX9324_REG_ADV_CTRL4 0x44
#define SX9324_REG_ADV_CTRL5 0x45
#define SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK GENMASK(3, 2)
#define SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 0x04
#define SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 0x01
#define SX9324_REG_ADV_CTRL6 0x46
#define SX9324_REG_ADV_CTRL7 0x47
#define SX9324_REG_ADV_CTRL8 0x48
#define SX9324_REG_ADV_CTRL9 0x49
#define SX9324_REG_ADV_CTRL10 0x4a
#define SX9324_REG_ADV_CTRL11 0x4b
#define SX9324_REG_ADV_CTRL12 0x4c
#define SX9324_REG_ADV_CTRL13 0x4d
#define SX9324_REG_ADV_CTRL14 0x4e
#define SX9324_REG_ADV_CTRL15 0x4f
#define SX9324_REG_ADV_CTRL16 0x50
#define SX9324_REG_ADV_CTRL17 0x51
#define SX9324_REG_ADV_CTRL18 0x52
#define SX9324_REG_ADV_CTRL19 0x53
#define SX9324_REG_ADV_CTRL20 0x54
#define SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION 0xf0
#define SX9324_REG_PHASE_SEL 0x60
#define SX9324_REG_USEFUL_MSB 0x61
#define SX9324_REG_USEFUL_LSB 0x62
#define SX9324_REG_AVG_MSB 0x63
#define SX9324_REG_AVG_LSB 0x64
#define SX9324_REG_DIFF_MSB 0x65
#define SX9324_REG_DIFF_LSB 0x66
#define SX9324_REG_OFFSET_MSB 0x67
#define SX9324_REG_OFFSET_LSB 0x68
#define SX9324_REG_SAR_MSB 0x69
#define SX9324_REG_SAR_LSB 0x6a
#define SX9324_REG_RESET 0x9f
/* Write this to REG_RESET to do a soft reset. */
#define SX9324_SOFT_RESET 0xde
#define SX9324_REG_WHOAMI 0xfa
#define SX9324_WHOAMI_VALUE 0x23
#define SX9324_REG_REVISION 0xfe
/* 4 channels, as defined in STAT0: PH0, PH1, PH2 and PH3. */
#define SX9324_NUM_CHANNELS 4
/* 3 CS pins: CS0, CS1, CS2. */
#define SX9324_NUM_PINS 3
static const char * const sx9324_cs_pin_usage[] = { "HZ", "MI", "DS", "GD" };
static ssize_t sx9324_phase_configuration_show(struct iio_dev *indio_dev,
uintptr_t private,
const struct iio_chan_spec *chan,
char *buf)
{
struct sx_common_data *data = iio_priv(indio_dev);
unsigned int val;
int i, ret, pin_idx;
size_t len = 0;
ret = regmap_read(data->regmap, SX9324_REG_AFE_PH0 + chan->channel, &val);
if (ret < 0)
return ret;
for (i = 0; i < SX9324_NUM_PINS; i++) {
pin_idx = (val & SX9324_REG_AFE_PH0_PIN_MASK(i)) >> (2 * i);
len += sysfs_emit_at(buf, len, "%s,",
sx9324_cs_pin_usage[pin_idx]);
}
buf[len - 1] = '\n';
return len;
}
static const struct iio_chan_spec_ext_info sx9324_channel_ext_info[] = {
{
.name = "setup",
.shared = IIO_SEPARATE,
.read = sx9324_phase_configuration_show,
},
{}
};
#define SX9324_CHANNEL(idx) \
{ \
.type = IIO_PROXIMITY, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.info_mask_separate_available = \
BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
.info_mask_shared_by_all_available = \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.indexed = 1, \
.channel = idx, \
.address = SX9324_REG_DIFF_MSB, \
.event_spec = sx_common_events, \
.num_event_specs = ARRAY_SIZE(sx_common_events), \
.scan_index = idx, \
.scan_type = { \
.sign = 's', \
.realbits = 12, \
.storagebits = 16, \
.endianness = IIO_BE, \
}, \
.ext_info = sx9324_channel_ext_info, \
}
static const struct iio_chan_spec sx9324_channels[] = {
SX9324_CHANNEL(0), /* Phase 0 */
SX9324_CHANNEL(1), /* Phase 1 */
SX9324_CHANNEL(2), /* Phase 2 */
SX9324_CHANNEL(3), /* Phase 3 */
IIO_CHAN_SOFT_TIMESTAMP(4),
};
/*
* Each entry contains the integer part (val) and the fractional part, in micro
* seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
*/
static const struct {
int val;
int val2;
} sx9324_samp_freq_table[] = {
{ 1000, 0 }, /* 00000: Min (no idle time) */
{ 500, 0 }, /* 00001: 2 ms */
{ 250, 0 }, /* 00010: 4 ms */
{ 166, 666666 }, /* 00011: 6 ms */
{ 125, 0 }, /* 00100: 8 ms */
{ 100, 0 }, /* 00101: 10 ms */
{ 71, 428571 }, /* 00110: 14 ms */
{ 55, 555556 }, /* 00111: 18 ms */
{ 45, 454545 }, /* 01000: 22 ms */
{ 38, 461538 }, /* 01001: 26 ms */
{ 33, 333333 }, /* 01010: 30 ms */
{ 29, 411765 }, /* 01011: 34 ms */
{ 26, 315789 }, /* 01100: 38 ms */
{ 23, 809524 }, /* 01101: 42 ms */
{ 21, 739130 }, /* 01110: 46 ms */
{ 20, 0 }, /* 01111: 50 ms */
{ 17, 857143 }, /* 10000: 56 ms */
{ 16, 129032 }, /* 10001: 62 ms */
{ 14, 705882 }, /* 10010: 68 ms */
{ 13, 513514 }, /* 10011: 74 ms */
{ 12, 500000 }, /* 10100: 80 ms */
{ 11, 111111 }, /* 10101: 90 ms */
{ 10, 0 }, /* 10110: 100 ms (Typ.) */
{ 5, 0 }, /* 10111: 200 ms */
{ 3, 333333 }, /* 11000: 300 ms */
{ 2, 500000 }, /* 11001: 400 ms */
{ 1, 666667 }, /* 11010: 600 ms */
{ 1, 250000 }, /* 11011: 800 ms */
{ 1, 0 }, /* 11100: 1 s */
{ 0, 500000 }, /* 11101: 2 s */
{ 0, 333333 }, /* 11110: 3 s */
{ 0, 250000 }, /* 11111: 4 s */
};
static const unsigned int sx9324_scan_period_table[] = {
2, 15, 30, 45, 60, 90, 120, 200,
400, 600, 800, 1000, 2000, 3000, 4000, 5000,
};
static const struct regmap_range sx9324_writable_reg_ranges[] = {
/*
* To set COMPSTAT for compensation, even if datasheet says register is
* RO.
*/
regmap_reg_range(SX9324_REG_STAT2, SX9324_REG_STAT2),
regmap_reg_range(SX9324_REG_IRQ_MSK, SX9324_REG_IRQ_CFG2),
regmap_reg_range(SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL1),
/* Leave i2c and clock spreading as unavailable */
regmap_reg_range(SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL9),
regmap_reg_range(SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL7),
regmap_reg_range(SX9324_REG_ADV_CTRL0, SX9324_REG_ADV_CTRL20),
regmap_reg_range(SX9324_REG_PHASE_SEL, SX9324_REG_PHASE_SEL),
regmap_reg_range(SX9324_REG_OFFSET_MSB, SX9324_REG_OFFSET_LSB),
regmap_reg_range(SX9324_REG_RESET, SX9324_REG_RESET),
};
static const struct regmap_access_table sx9324_writeable_regs = {
.yes_ranges = sx9324_writable_reg_ranges,
.n_yes_ranges = ARRAY_SIZE(sx9324_writable_reg_ranges),
};
/*
* All allocated registers are readable, so we just list unallocated
* ones.
*/
static const struct regmap_range sx9324_non_readable_reg_ranges[] = {
regmap_reg_range(SX9324_REG_IRQ_CFG2 + 1, SX9324_REG_GNRL_CTRL0 - 1),
regmap_reg_range(SX9324_REG_GNRL_CTRL1 + 1, SX9324_REG_AFE_CTRL0 - 1),
regmap_reg_range(SX9324_REG_AFE_CTRL9 + 1, SX9324_REG_PROX_CTRL0 - 1),
regmap_reg_range(SX9324_REG_PROX_CTRL7 + 1, SX9324_REG_ADV_CTRL0 - 1),
regmap_reg_range(SX9324_REG_ADV_CTRL20 + 1, SX9324_REG_PHASE_SEL - 1),
regmap_reg_range(SX9324_REG_SAR_LSB + 1, SX9324_REG_RESET - 1),
regmap_reg_range(SX9324_REG_RESET + 1, SX9324_REG_WHOAMI - 1),
regmap_reg_range(SX9324_REG_WHOAMI + 1, SX9324_REG_REVISION - 1),
};
static const struct regmap_access_table sx9324_readable_regs = {
.no_ranges = sx9324_non_readable_reg_ranges,
.n_no_ranges = ARRAY_SIZE(sx9324_non_readable_reg_ranges),
};
static const struct regmap_range sx9324_volatile_reg_ranges[] = {
regmap_reg_range(SX9324_REG_IRQ_SRC, SX9324_REG_STAT3),
regmap_reg_range(SX9324_REG_USEFUL_MSB, SX9324_REG_DIFF_LSB),
regmap_reg_range(SX9324_REG_SAR_MSB, SX9324_REG_SAR_LSB),
regmap_reg_range(SX9324_REG_WHOAMI, SX9324_REG_WHOAMI),
regmap_reg_range(SX9324_REG_REVISION, SX9324_REG_REVISION),
};
static const struct regmap_access_table sx9324_volatile_regs = {
.yes_ranges = sx9324_volatile_reg_ranges,
.n_yes_ranges = ARRAY_SIZE(sx9324_volatile_reg_ranges),
};
static const struct regmap_config sx9324_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = SX9324_REG_REVISION,
.cache_type = REGCACHE_RBTREE,
.wr_table = &sx9324_writeable_regs,
.rd_table = &sx9324_readable_regs,
.volatile_table = &sx9324_volatile_regs,
};
static int sx9324_read_prox_data(struct sx_common_data *data,
const struct iio_chan_spec *chan,
__be16 *val)
{
int ret;
ret = regmap_write(data->regmap, SX9324_REG_PHASE_SEL, chan->channel);
if (ret < 0)
return ret;
return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
}
/*
* If we have no interrupt support, we have to wait for a scan period
* after enabling a channel to get a result.
*/
static int sx9324_wait_for_sample(struct sx_common_data *data)
{
int ret;
unsigned int val;
ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &val);
if (ret < 0)
return ret;
val = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, val);
msleep(sx9324_scan_period_table[val]);
return 0;
}
static int sx9324_read_gain(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int reg, regval;
int ret;
reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2;
ret = regmap_read(data->regmap, reg, &regval);
if (ret)
return ret;
regval = FIELD_GET(SX9324_REG_PROX_CTRL0_GAIN_MASK, regval);
if (regval)
regval--;
else if (regval == SX9324_REG_PROX_CTRL0_GAIN_RSVD ||
regval > SX9324_REG_PROX_CTRL0_GAIN_8)
return -EINVAL;
*val = 1 << regval;
return IIO_VAL_INT;
}
static int sx9324_read_samp_freq(struct sx_common_data *data,
int *val, int *val2)
{
int ret;
unsigned int regval;
ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &regval);
if (ret)
return ret;
regval = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, regval);
*val = sx9324_samp_freq_table[regval].val;
*val2 = sx9324_samp_freq_table[regval].val2;
return IIO_VAL_INT_PLUS_MICRO;
}
static int sx9324_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long mask)
{
struct sx_common_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = sx_common_read_proximity(data, chan, val);
iio_device_release_direct_mode(indio_dev);
return ret;
case IIO_CHAN_INFO_HARDWAREGAIN:
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
ret = sx9324_read_gain(data, chan, val);
iio_device_release_direct_mode(indio_dev);
return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
return sx9324_read_samp_freq(data, val, val2);
default:
return -EINVAL;
}
}
static const int sx9324_gain_vals[] = { 1, 2, 4, 8 };
static int sx9324_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
*type = IIO_VAL_INT;
*length = ARRAY_SIZE(sx9324_gain_vals);
*vals = sx9324_gain_vals;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_SAMP_FREQ:
*type = IIO_VAL_INT_PLUS_MICRO;
*length = ARRAY_SIZE(sx9324_samp_freq_table) * 2;
*vals = (int *)sx9324_samp_freq_table;
return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
}
static int sx9324_set_samp_freq(struct sx_common_data *data,
int val, int val2)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++)
if (val == sx9324_samp_freq_table[i].val &&
val2 == sx9324_samp_freq_table[i].val2)
break;
if (i == ARRAY_SIZE(sx9324_samp_freq_table))
return -EINVAL;
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap,
SX9324_REG_GNRL_CTRL0,
SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_read_thresh(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int regval;
unsigned int reg;
int ret;
/*
* TODO(gwendal): Depending on the phase function
* (proximity/table/body), retrieve the right threshold.
* For now, return the proximity threshold.
*/
reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2;
ret = regmap_read(data->regmap, reg, &regval);
if (ret)
return ret;
if (regval <= 1)
*val = regval;
else
*val = (regval * regval) / 2;
return IIO_VAL_INT;
}
static int sx9324_read_hysteresis(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int regval, pthresh;
int ret;
ret = sx9324_read_thresh(data, chan, &pthresh);
if (ret < 0)
return ret;
ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
if (ret)
return ret;
regval = FIELD_GET(SX9324_REG_PROX_CTRL5_HYST_MASK, regval);
if (!regval)
*val = 0;
else
*val = pthresh >> (5 - regval);
return IIO_VAL_INT;
}
static int sx9324_read_far_debounce(struct sx_common_data *data, int *val)
{
unsigned int regval;
int ret;
ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
if (ret)
return ret;
regval = FIELD_GET(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, regval);
if (regval)
*val = 1 << regval;
else
*val = 0;
return IIO_VAL_INT;
}
static int sx9324_read_close_debounce(struct sx_common_data *data, int *val)
{
unsigned int regval;
int ret;
ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
if (ret)
return ret;
regval = FIELD_GET(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, regval);
if (regval)
*val = 1 << regval;
else
*val = 0;
return IIO_VAL_INT;
}
static int sx9324_read_event_val(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int *val, int *val2)
{
struct sx_common_data *data = iio_priv(indio_dev);
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
switch (info) {
case IIO_EV_INFO_VALUE:
return sx9324_read_thresh(data, chan, val);
case IIO_EV_INFO_PERIOD:
switch (dir) {
case IIO_EV_DIR_RISING:
return sx9324_read_far_debounce(data, val);
case IIO_EV_DIR_FALLING:
return sx9324_read_close_debounce(data, val);
default:
return -EINVAL;
}
case IIO_EV_INFO_HYSTERESIS:
return sx9324_read_hysteresis(data, chan, val);
default:
return -EINVAL;
}
}
static int sx9324_write_thresh(struct sx_common_data *data,
const struct iio_chan_spec *chan, int _val)
{
unsigned int reg, val = _val;
int ret;
reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2;
if (val >= 1)
val = int_sqrt(2 * val);
if (val > 0xff)
return -EINVAL;
mutex_lock(&data->mutex);
ret = regmap_write(data->regmap, reg, val);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_write_hysteresis(struct sx_common_data *data,
const struct iio_chan_spec *chan, int _val)
{
unsigned int hyst, val = _val;
int ret, pthresh;
ret = sx9324_read_thresh(data, chan, &pthresh);
if (ret < 0)
return ret;
if (val == 0)
hyst = 0;
else if (val >= pthresh >> 2)
hyst = 3;
else if (val >= pthresh >> 3)
hyst = 2;
else if (val >= pthresh >> 4)
hyst = 1;
else
return -EINVAL;
hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst);
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
SX9324_REG_PROX_CTRL5_HYST_MASK, hyst);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_write_far_debounce(struct sx_common_data *data, int _val)
{
unsigned int regval, val = _val;
int ret;
if (val > 0)
val = ilog2(val);
if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val))
return -EINVAL;
regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val);
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK,
regval);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_write_close_debounce(struct sx_common_data *data, int _val)
{
unsigned int regval, val = _val;
int ret;
if (val > 0)
val = ilog2(val);
if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val))
return -EINVAL;
regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val);
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK,
regval);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_write_event_val(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int val, int val2)
{
struct sx_common_data *data = iio_priv(indio_dev);
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
switch (info) {
case IIO_EV_INFO_VALUE:
return sx9324_write_thresh(data, chan, val);
case IIO_EV_INFO_PERIOD:
switch (dir) {
case IIO_EV_DIR_RISING:
return sx9324_write_far_debounce(data, val);
case IIO_EV_DIR_FALLING:
return sx9324_write_close_debounce(data, val);
default:
return -EINVAL;
}
case IIO_EV_INFO_HYSTERESIS:
return sx9324_write_hysteresis(data, chan, val);
default:
return -EINVAL;
}
}
static int sx9324_write_gain(struct sx_common_data *data,
const struct iio_chan_spec *chan, int val)
{
unsigned int gain, reg;
int ret;
reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2;
gain = ilog2(val) + 1;
if (val <= 0 || gain > SX9324_REG_PROX_CTRL0_GAIN_8)
return -EINVAL;
gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain);
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap, reg,
SX9324_REG_PROX_CTRL0_GAIN_MASK,
gain);
mutex_unlock(&data->mutex);
return ret;
}
static int sx9324_write_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int val, int val2,
long mask)
{
struct sx_common_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
return sx9324_set_samp_freq(data, val, val2);
case IIO_CHAN_INFO_HARDWAREGAIN:
return sx9324_write_gain(data, chan, val);
default:
return -EINVAL;
}
}
static const struct sx_common_reg_default sx9324_default_regs[] = {
{ SX9324_REG_IRQ_MSK, 0x00 },
{ SX9324_REG_IRQ_CFG0, 0x00 },
{ SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND },
{ SX9324_REG_IRQ_CFG2, 0x00 },
{ SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS },
/*
* The lower 4 bits should not be set as it enable sensors measurements.
* Turning the detection on before the configuration values are set to
* good values can cause the device to return erroneous readings.
*/
{ SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL },
{ SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST },
{ SX9324_REG_AFE_CTRL3, 0x00 },
{ SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
SX9324_REG_AFE_CTRL4_RES_100 },
{ SX9324_REG_AFE_CTRL6, 0x00 },
{ SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
SX9324_REG_AFE_CTRL4_RES_100 },
/* TODO(gwendal): PHx use chip default or all grounded? */
{ SX9324_REG_AFE_PH0, 0x29 },
{ SX9324_REG_AFE_PH1, 0x26 },
{ SX9324_REG_AFE_PH2, 0x1a },
{ SX9324_REG_AFE_PH3, 0x16 },
{ SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESERVED |
SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM },
{ SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 },
{ SX9324_REG_PROX_CTRL0,
SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
{ SX9324_REG_PROX_CTRL1,
SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
{ SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K },
{ SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES |
SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K },
{ SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 |
SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 },
{ SX9324_REG_PROX_CTRL5, 0x00 },
{ SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
{ SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
{ SX9324_REG_ADV_CTRL0, 0x00 },
{ SX9324_REG_ADV_CTRL1, 0x00 },
{ SX9324_REG_ADV_CTRL2, 0x00 },
{ SX9324_REG_ADV_CTRL3, 0x00 },
{ SX9324_REG_ADV_CTRL4, 0x00 },
{ SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 |
SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 },
{ SX9324_REG_ADV_CTRL6, 0x00 },
{ SX9324_REG_ADV_CTRL7, 0x00 },
{ SX9324_REG_ADV_CTRL8, 0x00 },
{ SX9324_REG_ADV_CTRL9, 0x00 },
/* Body/Table threshold */
{ SX9324_REG_ADV_CTRL10, 0x00 },
{ SX9324_REG_ADV_CTRL11, 0x00 },
{ SX9324_REG_ADV_CTRL12, 0x00 },
/* TODO(gwendal): SAR currenly disabled */
{ SX9324_REG_ADV_CTRL13, 0x00 },
{ SX9324_REG_ADV_CTRL14, 0x00 },
{ SX9324_REG_ADV_CTRL15, 0x00 },
{ SX9324_REG_ADV_CTRL16, 0x00 },
{ SX9324_REG_ADV_CTRL17, 0x00 },
{ SX9324_REG_ADV_CTRL18, 0x00 },
{ SX9324_REG_ADV_CTRL19, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
{ SX9324_REG_ADV_CTRL20, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
};
/* Activate all channels and perform an initial compensation. */
static int sx9324_init_compensation(struct iio_dev *indio_dev)
{
struct sx_common_data *data = iio_priv(indio_dev);
unsigned int val;
int ret;
/* run the compensation phase on all channels */
ret = regmap_update_bits(data->regmap, SX9324_REG_STAT2,
SX9324_REG_STAT2_COMPSTAT_MASK,
SX9324_REG_STAT2_COMPSTAT_MASK);
if (ret)
return ret;
return regmap_read_poll_timeout(data->regmap, SX9324_REG_STAT2, val,
!(val & SX9324_REG_STAT2_COMPSTAT_MASK),
20000, 2000000);
}
static const struct sx_common_reg_default *
sx9324_get_default_reg(struct device *dev, int idx,
struct sx_common_reg_default *reg_def)
{
static const char * const sx9324_rints[] = { "lowest", "low", "high",
"highest" };
static const char * const sx9324_csidle[] = { "hi-z", "hi-z", "gnd",
"vdd" };
#define SX9324_PIN_DEF "semtech,ph0-pin"
#define SX9324_RESOLUTION_DEF "semtech,ph01-resolution"
#define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength"
unsigned int pin_defs[SX9324_NUM_PINS];
char prop[] = SX9324_PROXRAW_DEF;
u32 start = 0, raw = 0, pos = 0;
int ret, count, ph, pin;
const char *res;
memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def));
switch (reg_def->reg) {
case SX9324_REG_AFE_PH0:
case SX9324_REG_AFE_PH1:
case SX9324_REG_AFE_PH2:
case SX9324_REG_AFE_PH3:
ph = reg_def->reg - SX9324_REG_AFE_PH0;
scnprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph);
count = device_property_count_u32(dev, prop);
if (count != ARRAY_SIZE(pin_defs))
break;
ret = device_property_read_u32_array(dev, prop, pin_defs,
ARRAY_SIZE(pin_defs));
if (ret)
break;
for (pin = 0; pin < SX9324_NUM_PINS; pin++)
raw |= (pin_defs[pin] << (2 * pin)) &
SX9324_REG_AFE_PH0_PIN_MASK(pin);
reg_def->def = raw;
break;
case SX9324_REG_AFE_CTRL0:
ret = device_property_read_string(dev,
"semtech,cs-idle-sleep", &res);
if (!ret)
ret = match_string(sx9324_csidle, ARRAY_SIZE(sx9324_csidle), res);
if (ret >= 0) {
reg_def->def &= ~SX9324_REG_AFE_CTRL0_CSIDLE_MASK;
reg_def->def |= ret << SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT;
}
ret = device_property_read_string(dev,
"semtech,int-comp-resistor", &res);
if (ret)
break;
ret = match_string(sx9324_rints, ARRAY_SIZE(sx9324_rints), res);
if (ret < 0)
break;
reg_def->def &= ~SX9324_REG_AFE_CTRL0_RINT_MASK;
reg_def->def |= ret << SX9324_REG_AFE_CTRL0_RINT_SHIFT;
break;
case SX9324_REG_AFE_CTRL4:
case SX9324_REG_AFE_CTRL7:
if (reg_def->reg == SX9324_REG_AFE_CTRL4)
strncpy(prop, "semtech,ph01-resolution",
ARRAY_SIZE(prop));
else
strncpy(prop, "semtech,ph23-resolution",
ARRAY_SIZE(prop));
ret = device_property_read_u32(dev, prop, &raw);
if (ret)
break;
raw = ilog2(raw) - 3;
reg_def->def &= ~SX9324_REG_AFE_CTRL4_RESOLUTION_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL4_RESOLUTION_MASK,
raw);
break;
case SX9324_REG_AFE_CTRL8:
ret = device_property_read_u32(dev,
"semtech,input-precharge-resistor-ohms",
&raw);
if (ret)
break;
reg_def->def &= ~SX9324_REG_AFE_CTRL8_RESFILTIN_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL8_RESFILTIN_MASK,
raw / 2000);
break;
case SX9324_REG_AFE_CTRL9:
ret = device_property_read_u32(dev,
"semtech,input-analog-gain", &raw);
if (ret)
break;
/*
* The analog gain has the following setting:
* +---------+----------------+----------------+
* | dt(raw) | physical value | register value |
* +---------+----------------+----------------+
* | 0 | x1.247 | 6 |
* | 1 | x1 | 8 |
* | 2 | x0.768 | 11 |
* | 3 | x0.552 | 15 |
* +---------+----------------+----------------+
*/
reg_def->def &= ~SX9324_REG_AFE_CTRL9_AGAIN_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL9_AGAIN_MASK,
6 + raw * (raw + 3) / 2);
break;
case SX9324_REG_ADV_CTRL5:
ret = device_property_read_u32(dev, "semtech,startup-sensor",
&start);
if (ret)
break;
reg_def->def &= ~SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK,
start);
break;
case SX9324_REG_PROX_CTRL4:
ret = device_property_read_u32(dev, "semtech,avg-pos-strength",
&pos);
if (ret)
break;
/* Powers of 2, except for a gap between 16 and 64 */
raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
reg_def->def &= ~SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK,
raw);
break;
case SX9324_REG_PROX_CTRL0:
case SX9324_REG_PROX_CTRL1:
if (reg_def->reg == SX9324_REG_PROX_CTRL0)
strncpy(prop, "semtech,ph01-proxraw-strength",
ARRAY_SIZE(prop));
else
strncpy(prop, "semtech,ph23-proxraw-strength",
ARRAY_SIZE(prop));
ret = device_property_read_u32(dev, prop, &raw);
if (ret)
break;
reg_def->def &= ~SX9324_REG_PROX_CTRL0_RAWFILT_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL0_RAWFILT_MASK,
raw);
break;
}
return reg_def;
}
static int sx9324_check_whoami(struct device *dev,
struct iio_dev *indio_dev)
{
/*
* Only one sensor for this driver. Assuming the device tree
* is correct, just set the sensor name.
*/
indio_dev->name = "sx9324";
return 0;
}
static const struct sx_common_chip_info sx9324_chip_info = {
.reg_stat = SX9324_REG_STAT0,
.reg_irq_msk = SX9324_REG_IRQ_MSK,
.reg_enable_chan = SX9324_REG_GNRL_CTRL1,
.reg_reset = SX9324_REG_RESET,
.mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK,
.irq_msk_offset = 3,
.num_channels = SX9324_NUM_CHANNELS,
.num_default_regs = ARRAY_SIZE(sx9324_default_regs),
.ops = {
.read_prox_data = sx9324_read_prox_data,
.check_whoami = sx9324_check_whoami,
.init_compensation = sx9324_init_compensation,
.wait_for_sample = sx9324_wait_for_sample,
.get_default_reg = sx9324_get_default_reg,
},
.iio_channels = sx9324_channels,
.num_iio_channels = ARRAY_SIZE(sx9324_channels),
.iio_info = {
.read_raw = sx9324_read_raw,
.read_avail = sx9324_read_avail,
.read_event_value = sx9324_read_event_val,
.write_event_value = sx9324_write_event_val,
.write_raw = sx9324_write_raw,
.read_event_config = sx_common_read_event_config,
.write_event_config = sx_common_write_event_config,
},
};
static int sx9324_probe(struct i2c_client *client)
{
return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config);
}
static int __maybe_unused sx9324_suspend(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
unsigned int regval;
int ret;
disable_irq_nosync(data->client->irq);
mutex_lock(&data->mutex);
ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, &regval);
data->suspend_ctrl =
FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval);
if (ret < 0)
goto out;
/* Disable all phases, send the device to sleep. */
ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0);
out:
mutex_unlock(&data->mutex);
return ret;
}
static int __maybe_unused sx9324_resume(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
int ret;
mutex_lock(&data->mutex);
ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1,
data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL);
mutex_unlock(&data->mutex);
if (ret)
return ret;
enable_irq(data->client->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
static const struct acpi_device_id sx9324_acpi_match[] = {
{ "STH9324", SX9324_WHOAMI_VALUE },
{ }
};
MODULE_DEVICE_TABLE(acpi, sx9324_acpi_match);
static const struct of_device_id sx9324_of_match[] = {
{ .compatible = "semtech,sx9324", (void *)SX9324_WHOAMI_VALUE },
{ }
};
MODULE_DEVICE_TABLE(of, sx9324_of_match);
static const struct i2c_device_id sx9324_id[] = {
{ "sx9324", SX9324_WHOAMI_VALUE },
{ }
};
MODULE_DEVICE_TABLE(i2c, sx9324_id);
static struct i2c_driver sx9324_driver = {
.driver = {
.name = "sx9324",
.acpi_match_table = sx9324_acpi_match,
.of_match_table = sx9324_of_match,
.pm = &sx9324_pm_ops,
/*
* Lots of i2c transfers in probe + over 200 ms waiting in
* sx9324_init_compensation() mean a slow probe; prefer async
* so we don't delay boot if we're builtin to the kernel.
*/
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe_new = sx9324_probe,
.id_table = sx9324_id,
};
module_i2c_driver(sx9324_driver);
MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
MODULE_DESCRIPTION("Driver for Semtech SX9324 proximity sensor");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(SEMTECH_PROX);