d08b82c9e1
This adds a binding for the secondary interrupt controller in Sigma Designs SMP86xx and SMP87xx chips. Signed-off-by: Mans Rullgard <mans@mansr.com> [ jac: use 'interrupt-controller@XXX' notation in binding doc ] Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1453313237-18570-1-git-send-email-mans@mansr.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
50 lines
1.3 KiB
Plaintext
50 lines
1.3 KiB
Plaintext
Sigma Designs SMP86xx/SMP87xx secondary interrupt controller
|
|
|
|
Required properties:
|
|
- compatible: should be "sigma,smp8642-intc"
|
|
- reg: physical address of MMIO region
|
|
- ranges: address space mapping of child nodes
|
|
- interrupt-parent: phandle of parent interrupt controller
|
|
- interrupt-controller: boolean
|
|
- #address-cells: should be <1>
|
|
- #size-cells: should be <1>
|
|
|
|
One child node per control block with properties:
|
|
- reg: address of registers for this control block
|
|
- interrupt-controller: boolean
|
|
- #interrupt-cells: should be <2>, interrupt index and flags per interrupts.txt
|
|
- interrupts: interrupt spec of primary interrupt controller
|
|
|
|
Example:
|
|
|
|
interrupt-controller@6e000 {
|
|
compatible = "sigma,smp8642-intc";
|
|
reg = <0x6e000 0x400>;
|
|
ranges = <0x0 0x6e000 0x400>;
|
|
interrupt-parent = <&gic>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
irq0: interrupt-controller@0 {
|
|
reg = <0x000 0x100>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
irq1: interrupt-controller@100 {
|
|
reg = <0x100 0x100>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
irq2: interrupt-controller@300 {
|
|
reg = <0x300 0x100>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|