86a18ee21e
TI Keystone and DRA7xx SoCs have support for EDAC on DDR3 memory that can correct one bit errors and detect two bit errors. Add EDAC driver for this feature which plugs into the generic kernel EDAC framework. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-omap@vger.kernel.org Link: http://lkml.kernel.org/r/1510578490-14510-1-git-send-email-t-kristo@ti.com [ Add SPDX tag and make _emif_get_id() use edac_printk(). ] Signed-off-by: Borislav Petkov <bp@suse.de>
468 lines
14 KiB
Plaintext
468 lines
14 KiB
Plaintext
#
|
|
# EDAC Kconfig
|
|
# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
|
|
# Licensed and distributed under the GPL
|
|
|
|
config EDAC_ATOMIC_SCRUB
|
|
bool
|
|
|
|
config EDAC_SUPPORT
|
|
bool
|
|
|
|
menuconfig EDAC
|
|
tristate "EDAC (Error Detection And Correction) reporting"
|
|
depends on HAS_IOMEM && EDAC_SUPPORT && RAS
|
|
help
|
|
EDAC is a subsystem along with hardware-specific drivers designed to
|
|
report hardware errors. These are low-level errors that are reported
|
|
in the CPU or supporting chipset or other subsystems:
|
|
memory errors, cache errors, PCI errors, thermal throttling, etc..
|
|
If unsure, select 'Y'.
|
|
|
|
The mailing list for the EDAC project is linux-edac@vger.kernel.org.
|
|
|
|
if EDAC
|
|
|
|
config EDAC_LEGACY_SYSFS
|
|
bool "EDAC legacy sysfs"
|
|
default y
|
|
help
|
|
Enable the compatibility sysfs nodes.
|
|
Use 'Y' if your edac utilities aren't ported to work with the newer
|
|
structures.
|
|
|
|
config EDAC_DEBUG
|
|
bool "Debugging"
|
|
select DEBUG_FS
|
|
help
|
|
This turns on debugging information for the entire EDAC subsystem.
|
|
You do so by inserting edac_module with "edac_debug_level=x." Valid
|
|
levels are 0-4 (from low to high) and by default it is set to 2.
|
|
Usually you should select 'N' here.
|
|
|
|
config EDAC_DECODE_MCE
|
|
tristate "Decode MCEs in human-readable form (only on AMD for now)"
|
|
depends on CPU_SUP_AMD && X86_MCE_AMD
|
|
default y
|
|
---help---
|
|
Enable this option if you want to decode Machine Check Exceptions
|
|
occurring on your machine in human-readable form.
|
|
|
|
You should definitely say Y here in case you want to decode MCEs
|
|
which occur really early upon boot, before the module infrastructure
|
|
has been initialized.
|
|
|
|
config EDAC_GHES
|
|
bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
|
|
depends on ACPI_APEI_GHES && (EDAC=y)
|
|
help
|
|
Not all machines support hardware-driven error report. Some of those
|
|
provide a BIOS-driven error report mechanism via ACPI, using the
|
|
APEI/GHES driver. By enabling this option, the error reports provided
|
|
by GHES are sent to userspace via the EDAC API.
|
|
|
|
When this option is enabled, it will disable the hardware-driven
|
|
mechanisms, if a GHES BIOS is detected, entering into the
|
|
"Firmware First" mode.
|
|
|
|
It should be noticed that keeping both GHES and a hardware-driven
|
|
error mechanism won't work well, as BIOS will race with OS, while
|
|
reading the error registers. So, if you want to not use "Firmware
|
|
first" GHES error mechanism, you should disable GHES either at
|
|
compilation time or by passing "ghes.disable=1" Kernel parameter
|
|
at boot time.
|
|
|
|
In doubt, say 'Y'.
|
|
|
|
config EDAC_AMD64
|
|
tristate "AMD64 (Opteron, Athlon64)"
|
|
depends on AMD_NB && EDAC_DECODE_MCE
|
|
help
|
|
Support for error detection and correction of DRAM ECC errors on
|
|
the AMD64 families (>= K8) of memory controllers.
|
|
|
|
config EDAC_AMD64_ERROR_INJECTION
|
|
bool "Sysfs HW Error injection facilities"
|
|
depends on EDAC_AMD64
|
|
help
|
|
Recent Opterons (Family 10h and later) provide for Memory Error
|
|
Injection into the ECC detection circuits. The amd64_edac module
|
|
allows the operator/user to inject Uncorrectable and Correctable
|
|
errors into DRAM.
|
|
|
|
When enabled, in each of the respective memory controller directories
|
|
(/sys/devices/system/edac/mc/mcX), there are 3 input files:
|
|
|
|
- inject_section (0..3, 16-byte section of 64-byte cacheline),
|
|
- inject_word (0..8, 16-bit word of 16-byte section),
|
|
- inject_ecc_vector (hex ecc vector: select bits of inject word)
|
|
|
|
In addition, there are two control files, inject_read and inject_write,
|
|
which trigger the DRAM ECC Read and Write respectively.
|
|
|
|
config EDAC_AMD76X
|
|
tristate "AMD 76x (760, 762, 768)"
|
|
depends on PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the AMD 76x
|
|
series of chipsets used with the Athlon processor.
|
|
|
|
config EDAC_E7XXX
|
|
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
|
|
depends on PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
E7205, E7500, E7501 and E7505 server chipsets.
|
|
|
|
config EDAC_E752X
|
|
tristate "Intel e752x (e7520, e7525, e7320) and 3100"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
E7520, E7525, E7320 server chipsets.
|
|
|
|
config EDAC_I82443BXGX
|
|
tristate "Intel 82443BX/GX (440BX/GX)"
|
|
depends on PCI && X86_32
|
|
depends on BROKEN
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
82443BX/GX memory controllers (440BX/GX chipsets).
|
|
|
|
config EDAC_I82875P
|
|
tristate "Intel 82875p (D82875P, E7210)"
|
|
depends on PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
DP82785P and E7210 server chipsets.
|
|
|
|
config EDAC_I82975X
|
|
tristate "Intel 82975x (D82975x)"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
DP82975x server chipsets.
|
|
|
|
config EDAC_I3000
|
|
tristate "Intel 3000/3010"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
3000 and 3010 server chipsets.
|
|
|
|
config EDAC_I3200
|
|
tristate "Intel 3200"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
3200 and 3210 server chipsets.
|
|
|
|
config EDAC_IE31200
|
|
tristate "Intel e312xx"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
E3-1200 based DRAM controllers.
|
|
|
|
config EDAC_X38
|
|
tristate "Intel X38"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
X38 server chipsets.
|
|
|
|
config EDAC_I5400
|
|
tristate "Intel 5400 (Seaburg) chipsets"
|
|
depends on PCI && X86
|
|
help
|
|
Support for error detection and correction the Intel
|
|
i5400 MCH chipset (Seaburg).
|
|
|
|
config EDAC_I7CORE
|
|
tristate "Intel i7 Core (Nehalem) processors"
|
|
depends on PCI && X86 && X86_MCE_INTEL
|
|
help
|
|
Support for error detection and correction the Intel
|
|
i7 Core (Nehalem) Integrated Memory Controller that exists on
|
|
newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
|
|
and Xeon 55xx processors.
|
|
|
|
config EDAC_I82860
|
|
tristate "Intel 82860"
|
|
depends on PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
82860 chipset.
|
|
|
|
config EDAC_R82600
|
|
tristate "Radisys 82600 embedded chipset"
|
|
depends on PCI && X86_32
|
|
help
|
|
Support for error detection and correction on the Radisys
|
|
82600 embedded chipset.
|
|
|
|
config EDAC_I5000
|
|
tristate "Intel Greencreek/Blackford chipset"
|
|
depends on X86 && PCI
|
|
help
|
|
Support for error detection and correction the Intel
|
|
Greekcreek/Blackford chipsets.
|
|
|
|
config EDAC_I5100
|
|
tristate "Intel San Clemente MCH"
|
|
depends on X86 && PCI
|
|
help
|
|
Support for error detection and correction the Intel
|
|
San Clemente MCH.
|
|
|
|
config EDAC_I7300
|
|
tristate "Intel Clarksboro MCH"
|
|
depends on X86 && PCI
|
|
help
|
|
Support for error detection and correction the Intel
|
|
Clarksboro MCH (Intel 7300 chipset).
|
|
|
|
config EDAC_SBRIDGE
|
|
tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
|
|
depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
|
|
help
|
|
Support for error detection and correction the Intel
|
|
Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
|
|
|
|
config EDAC_SKX
|
|
tristate "Intel Skylake server Integrated MC"
|
|
depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
|
|
help
|
|
Support for error detection and correction the Intel
|
|
Skylake server Integrated Memory Controllers.
|
|
|
|
config EDAC_PND2
|
|
tristate "Intel Pondicherry2"
|
|
depends on PCI && X86_64 && X86_MCE_INTEL
|
|
help
|
|
Support for error detection and correction on the Intel
|
|
Pondicherry2 Integrated Memory Controller. This SoC IP is
|
|
first used on the Apollo Lake platform and Denverton
|
|
micro-server but may appear on others in the future.
|
|
|
|
config EDAC_MPC85XX
|
|
tristate "Freescale MPC83xx / MPC85xx"
|
|
depends on FSL_SOC
|
|
help
|
|
Support for error detection and correction on the Freescale
|
|
MPC8349, MPC8560, MPC8540, MPC8548, T4240
|
|
|
|
config EDAC_LAYERSCAPE
|
|
tristate "Freescale Layerscape DDR"
|
|
depends on ARCH_LAYERSCAPE
|
|
help
|
|
Support for error detection and correction on Freescale memory
|
|
controllers on Layerscape SoCs.
|
|
|
|
config EDAC_MV64X60
|
|
tristate "Marvell MV64x60"
|
|
depends on MV64X60
|
|
help
|
|
Support for error detection and correction on the Marvell
|
|
MV64360 and MV64460 chipsets.
|
|
|
|
config EDAC_PASEMI
|
|
tristate "PA Semi PWRficient"
|
|
depends on PPC_PASEMI && PCI
|
|
help
|
|
Support for error detection and correction on PA Semi
|
|
PWRficient.
|
|
|
|
config EDAC_CELL
|
|
tristate "Cell Broadband Engine memory controller"
|
|
depends on PPC_CELL_COMMON
|
|
help
|
|
Support for error detection and correction on the
|
|
Cell Broadband Engine internal memory controller
|
|
on platform without a hypervisor
|
|
|
|
config EDAC_PPC4XX
|
|
tristate "PPC4xx IBM DDR2 Memory Controller"
|
|
depends on 4xx
|
|
help
|
|
This enables support for EDAC on the ECC memory used
|
|
with the IBM DDR2 memory controller found in various
|
|
PowerPC 4xx embedded processors such as the 405EX[r],
|
|
440SP, 440SPe, 460EX, 460GT and 460SX.
|
|
|
|
config EDAC_AMD8131
|
|
tristate "AMD8131 HyperTransport PCI-X Tunnel"
|
|
depends on PCI && PPC_MAPLE
|
|
help
|
|
Support for error detection and correction on the
|
|
AMD8131 HyperTransport PCI-X Tunnel chip.
|
|
Note, add more Kconfig dependency if it's adopted
|
|
on some machine other than Maple.
|
|
|
|
config EDAC_AMD8111
|
|
tristate "AMD8111 HyperTransport I/O Hub"
|
|
depends on PCI && PPC_MAPLE
|
|
help
|
|
Support for error detection and correction on the
|
|
AMD8111 HyperTransport I/O Hub chip.
|
|
Note, add more Kconfig dependency if it's adopted
|
|
on some machine other than Maple.
|
|
|
|
config EDAC_CPC925
|
|
tristate "IBM CPC925 Memory Controller (PPC970FX)"
|
|
depends on PPC64
|
|
help
|
|
Support for error detection and correction on the
|
|
IBM CPC925 Bridge and Memory Controller, which is
|
|
a companion chip to the PowerPC 970 family of
|
|
processors.
|
|
|
|
config EDAC_TILE
|
|
tristate "Tilera Memory Controller"
|
|
depends on TILE
|
|
default y
|
|
help
|
|
Support for error detection and correction on the
|
|
Tilera memory controller.
|
|
|
|
config EDAC_HIGHBANK_MC
|
|
tristate "Highbank Memory Controller"
|
|
depends on ARCH_HIGHBANK
|
|
help
|
|
Support for error detection and correction on the
|
|
Calxeda Highbank memory controller.
|
|
|
|
config EDAC_HIGHBANK_L2
|
|
tristate "Highbank L2 Cache"
|
|
depends on ARCH_HIGHBANK
|
|
help
|
|
Support for error detection and correction on the
|
|
Calxeda Highbank memory controller.
|
|
|
|
config EDAC_OCTEON_PC
|
|
tristate "Cavium Octeon Primary Caches"
|
|
depends on CPU_CAVIUM_OCTEON
|
|
help
|
|
Support for error detection and correction on the primary caches of
|
|
the cnMIPS cores of Cavium Octeon family SOCs.
|
|
|
|
config EDAC_OCTEON_L2C
|
|
tristate "Cavium Octeon Secondary Caches (L2C)"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
Support for error detection and correction on the
|
|
Cavium Octeon family of SOCs.
|
|
|
|
config EDAC_OCTEON_LMC
|
|
tristate "Cavium Octeon DRAM Memory Controller (LMC)"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
Support for error detection and correction on the
|
|
Cavium Octeon family of SOCs.
|
|
|
|
config EDAC_OCTEON_PCI
|
|
tristate "Cavium Octeon PCI Controller"
|
|
depends on PCI && CAVIUM_OCTEON_SOC
|
|
help
|
|
Support for error detection and correction on the
|
|
Cavium Octeon family of SOCs.
|
|
|
|
config EDAC_THUNDERX
|
|
tristate "Cavium ThunderX EDAC"
|
|
depends on ARM64
|
|
depends on PCI
|
|
help
|
|
Support for error detection and correction on the
|
|
Cavium ThunderX memory controllers (LMC), Cache
|
|
Coherent Processor Interconnect (CCPI) and L2 cache
|
|
blocks (TAD, CBC, MCI).
|
|
|
|
config EDAC_ALTERA
|
|
bool "Altera SOCFPGA ECC"
|
|
depends on EDAC=y && ARCH_SOCFPGA
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera SOCs. This must be selected for SDRAM ECC.
|
|
Note that the preloader must initialize the SDRAM
|
|
before loading the kernel.
|
|
|
|
config EDAC_ALTERA_L2C
|
|
bool "Altera L2 Cache ECC"
|
|
depends on EDAC_ALTERA=y && CACHE_L2X0
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera L2 cache Memory for Altera SoCs. This option
|
|
requires L2 cache.
|
|
|
|
config EDAC_ALTERA_OCRAM
|
|
bool "Altera On-Chip RAM ECC"
|
|
depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera On-Chip RAM Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_ETHERNET
|
|
bool "Altera Ethernet FIFO ECC"
|
|
depends on EDAC_ALTERA=y
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera Ethernet FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_NAND
|
|
bool "Altera NAND FIFO ECC"
|
|
depends on EDAC_ALTERA=y && MTD_NAND_DENALI
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera NAND FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_DMA
|
|
bool "Altera DMA FIFO ECC"
|
|
depends on EDAC_ALTERA=y && PL330_DMA=y
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera DMA FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_USB
|
|
bool "Altera USB FIFO ECC"
|
|
depends on EDAC_ALTERA=y && USB_DWC2
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera USB FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_QSPI
|
|
bool "Altera QSPI FIFO ECC"
|
|
depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera QSPI FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_ALTERA_SDMMC
|
|
bool "Altera SDMMC FIFO ECC"
|
|
depends on EDAC_ALTERA=y && MMC_DW
|
|
help
|
|
Support for error detection and correction on the
|
|
Altera SDMMC FIFO Memory for Altera SoCs.
|
|
|
|
config EDAC_SYNOPSYS
|
|
tristate "Synopsys DDR Memory Controller"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Support for error detection and correction on the Synopsys DDR
|
|
memory controller.
|
|
|
|
config EDAC_XGENE
|
|
tristate "APM X-Gene SoC"
|
|
depends on (ARM64 || COMPILE_TEST)
|
|
help
|
|
Support for error detection and correction on the
|
|
APM X-Gene family of SOCs.
|
|
|
|
config EDAC_TI
|
|
tristate "Texas Instruments DDR3 ECC Controller"
|
|
depends on ARCH_KEYSTONE || SOC_DRA7XX
|
|
help
|
|
Support for error detection and correction on the
|
|
TI SoCs.
|
|
|
|
endif # EDAC
|