35c3c196d3
Some SoCs like omap3 can configure GPIO irqs to use Linux generic dedicated wakeirq support. If the dedicated wakeirq is configured, the SoC will use a always-on interrupt controller to produce wake-up events. If bq24190 is configured for dedicated wakeirq, we need to check the interrupt status on PM runtime resume. This is because the Linux generic wakeirq will call pm_runtime_resume() on the device on a wakeirq. And as the bq24190 interrupt is falling edge sensitive and only active for 250 us, there will be no device interrupt seen by the runtime SoC IRQ controller. Note that this can cause spurious interrupts on omap3 devices with bq24190 connected to gpio banks 2 - 5 as there's a glitch on those pins waking from off mode as listed in "Advisory 1.45". Devices with this issue should not configure the optional wakeirq interrupt in the dts file. Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
Linux kernel ============ This file was moved to Documentation/admin-guide/README.rst Please notice that there are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.