e7ee514058
The code instantiating an i2c-mux-gpio platform device doesn't necessarily know in advance the GPIO pin numbers it wants to use. If pins are on a GPIO device which gets its base GPIO number assigned dynamically at run-time, the values can't be hard-coded. In that case, let the caller tell i2c-mux-gpio the name of the GPIO chip and the (relative) GPIO pin numbers to use. At probe time, the i2c-mux-gpio driver will look for the chip and apply the proper offset to turn relative GPIO pin numbers to absolute GPIO pin numbers. The same could be (and was so far) done on the caller's end, however doing it in i2c-mux-gpio has two benefits: * It avoids duplicating the code on every caller's side (about 30 lines of code.) * It allows for deferred probing for the muxed part of the I2C bus only. If finding the GPIO chip is the caller's responsibility, then deferred probing (if the GPIO chip isn't there yet) will not only affect the mux and the I2C bus segments behind it, but also the I2C bus trunk. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Korsgaard <peter.korsgaard@barco.com>
198 lines
4.5 KiB
C
198 lines
4.5 KiB
C
/*
|
|
* I2C multiplexer using GPIO API
|
|
*
|
|
* Peter Korsgaard <peter.korsgaard@barco.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-mux.h>
|
|
#include <linux/i2c-mux-gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio.h>
|
|
|
|
struct gpiomux {
|
|
struct i2c_adapter *parent;
|
|
struct i2c_adapter **adap; /* child busses */
|
|
struct i2c_mux_gpio_platform_data data;
|
|
unsigned gpio_base;
|
|
};
|
|
|
|
static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mux->data.n_gpios; i++)
|
|
gpio_set_value(mux->gpio_base + mux->data.gpios[i],
|
|
val & (1 << i));
|
|
}
|
|
|
|
static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
|
|
{
|
|
struct gpiomux *mux = data;
|
|
|
|
i2c_mux_gpio_set(mux, mux->data.values[chan]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan)
|
|
{
|
|
struct gpiomux *mux = data;
|
|
|
|
i2c_mux_gpio_set(mux, mux->data.idle);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit match_gpio_chip_by_label(struct gpio_chip *chip,
|
|
void *data)
|
|
{
|
|
return !strcmp(chip->label, data);
|
|
}
|
|
|
|
static int __devinit i2c_mux_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpiomux *mux;
|
|
struct i2c_mux_gpio_platform_data *pdata;
|
|
struct i2c_adapter *parent;
|
|
int (*deselect) (struct i2c_adapter *, void *, u32);
|
|
unsigned initial_state, gpio_base;
|
|
int i, ret;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "Missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* If a GPIO chip name is provided, the GPIO pin numbers provided are
|
|
* relative to its base GPIO number. Otherwise they are absolute.
|
|
*/
|
|
if (pdata->gpio_chip) {
|
|
struct gpio_chip *gpio;
|
|
|
|
gpio = gpiochip_find(pdata->gpio_chip,
|
|
match_gpio_chip_by_label);
|
|
if (!gpio)
|
|
return -EPROBE_DEFER;
|
|
|
|
gpio_base = gpio->base;
|
|
} else {
|
|
gpio_base = 0;
|
|
}
|
|
|
|
parent = i2c_get_adapter(pdata->parent);
|
|
if (!parent) {
|
|
dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
|
|
pdata->parent);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
|
|
if (!mux) {
|
|
ret = -ENOMEM;
|
|
goto alloc_failed;
|
|
}
|
|
|
|
mux->parent = parent;
|
|
mux->data = *pdata;
|
|
mux->gpio_base = gpio_base;
|
|
mux->adap = devm_kzalloc(&pdev->dev,
|
|
sizeof(*mux->adap) * pdata->n_values,
|
|
GFP_KERNEL);
|
|
if (!mux->adap) {
|
|
ret = -ENOMEM;
|
|
goto alloc_failed;
|
|
}
|
|
|
|
if (pdata->idle != I2C_MUX_GPIO_NO_IDLE) {
|
|
initial_state = pdata->idle;
|
|
deselect = i2c_mux_gpio_deselect;
|
|
} else {
|
|
initial_state = pdata->values[0];
|
|
deselect = NULL;
|
|
}
|
|
|
|
for (i = 0; i < pdata->n_gpios; i++) {
|
|
ret = gpio_request(gpio_base + pdata->gpios[i], "i2c-mux-gpio");
|
|
if (ret)
|
|
goto err_request_gpio;
|
|
gpio_direction_output(gpio_base + pdata->gpios[i],
|
|
initial_state & (1 << i));
|
|
}
|
|
|
|
for (i = 0; i < pdata->n_values; i++) {
|
|
u32 nr = pdata->base_nr ? (pdata->base_nr + i) : 0;
|
|
unsigned int class = pdata->classes ? pdata->classes[i] : 0;
|
|
|
|
mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr,
|
|
i, class,
|
|
i2c_mux_gpio_select, deselect);
|
|
if (!mux->adap[i]) {
|
|
ret = -ENODEV;
|
|
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
|
|
goto add_adapter_failed;
|
|
}
|
|
}
|
|
|
|
dev_info(&pdev->dev, "%d port mux on %s adapter\n",
|
|
pdata->n_values, parent->name);
|
|
|
|
platform_set_drvdata(pdev, mux);
|
|
|
|
return 0;
|
|
|
|
add_adapter_failed:
|
|
for (; i > 0; i--)
|
|
i2c_del_mux_adapter(mux->adap[i - 1]);
|
|
i = pdata->n_gpios;
|
|
err_request_gpio:
|
|
for (; i > 0; i--)
|
|
gpio_free(gpio_base + pdata->gpios[i - 1]);
|
|
alloc_failed:
|
|
i2c_put_adapter(parent);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit i2c_mux_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpiomux *mux = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < mux->data.n_values; i++)
|
|
i2c_del_mux_adapter(mux->adap[i]);
|
|
|
|
for (i = 0; i < mux->data.n_gpios; i++)
|
|
gpio_free(mux->gpio_base + mux->data.gpios[i]);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
i2c_put_adapter(mux->parent);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver i2c_mux_gpio_driver = {
|
|
.probe = i2c_mux_gpio_probe,
|
|
.remove = __devexit_p(i2c_mux_gpio_remove),
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "i2c-mux-gpio",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(i2c_mux_gpio_driver);
|
|
|
|
MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
|
|
MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:i2c-mux-gpio");
|