6092077ad0
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2361 lines
62 KiB
C
2361 lines
62 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Interface handling
|
|
*
|
|
* Copyright 2002-2005, Instant802 Networks, Inc.
|
|
* Copyright 2005-2006, Devicescape Software, Inc.
|
|
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
|
|
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
|
|
* Copyright 2013-2014 Intel Mobile Communications GmbH
|
|
* Copyright (c) 2016 Intel Deutschland GmbH
|
|
* Copyright (C) 2018-2023 Intel Corporation
|
|
*/
|
|
#include <linux/slab.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/kcov.h>
|
|
#include <net/mac80211.h>
|
|
#include <net/ieee80211_radiotap.h>
|
|
#include "ieee80211_i.h"
|
|
#include "sta_info.h"
|
|
#include "debugfs_netdev.h"
|
|
#include "mesh.h"
|
|
#include "led.h"
|
|
#include "driver-ops.h"
|
|
#include "wme.h"
|
|
#include "rate.h"
|
|
|
|
/**
|
|
* DOC: Interface list locking
|
|
*
|
|
* The interface list in each struct ieee80211_local is protected
|
|
* three-fold:
|
|
*
|
|
* (1) modifications may only be done under the RTNL *and* wiphy mutex
|
|
* *and* iflist_mtx
|
|
* (2) modifications are done in an RCU manner so atomic readers
|
|
* can traverse the list in RCU-safe blocks.
|
|
*
|
|
* As a consequence, reads (traversals) of the list can be protected
|
|
* by either the RTNL, the wiphy mutex, the iflist_mtx or RCU.
|
|
*/
|
|
|
|
static void ieee80211_iface_work(struct wiphy *wiphy, struct wiphy_work *work);
|
|
|
|
bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
int power;
|
|
|
|
rcu_read_lock();
|
|
chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf);
|
|
if (!chanctx_conf) {
|
|
rcu_read_unlock();
|
|
return false;
|
|
}
|
|
|
|
power = ieee80211_chandef_max_power(&chanctx_conf->def);
|
|
rcu_read_unlock();
|
|
|
|
if (sdata->deflink.user_power_level != IEEE80211_UNSET_POWER_LEVEL)
|
|
power = min(power, sdata->deflink.user_power_level);
|
|
|
|
if (sdata->deflink.ap_power_level != IEEE80211_UNSET_POWER_LEVEL)
|
|
power = min(power, sdata->deflink.ap_power_level);
|
|
|
|
if (power != sdata->vif.bss_conf.txpower) {
|
|
sdata->vif.bss_conf.txpower = power;
|
|
ieee80211_hw_config(sdata->local, 0);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata,
|
|
bool update_bss)
|
|
{
|
|
if (__ieee80211_recalc_txpower(sdata) ||
|
|
(update_bss && ieee80211_sdata_running(sdata)))
|
|
ieee80211_link_info_change_notify(sdata, &sdata->deflink,
|
|
BSS_CHANGED_TXPOWER);
|
|
}
|
|
|
|
static u32 __ieee80211_idle_off(struct ieee80211_local *local)
|
|
{
|
|
if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
|
|
return 0;
|
|
|
|
local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
|
|
return IEEE80211_CONF_CHANGE_IDLE;
|
|
}
|
|
|
|
static u32 __ieee80211_idle_on(struct ieee80211_local *local)
|
|
{
|
|
if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
|
|
return 0;
|
|
|
|
ieee80211_flush_queues(local, NULL, false);
|
|
|
|
local->hw.conf.flags |= IEEE80211_CONF_IDLE;
|
|
return IEEE80211_CONF_CHANGE_IDLE;
|
|
}
|
|
|
|
static u32 __ieee80211_recalc_idle(struct ieee80211_local *local,
|
|
bool force_active)
|
|
{
|
|
bool working, scanning, active;
|
|
unsigned int led_trig_start = 0, led_trig_stop = 0;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
active = force_active ||
|
|
!list_empty(&local->chanctx_list) ||
|
|
local->monitors;
|
|
|
|
working = !local->ops->remain_on_channel &&
|
|
!list_empty(&local->roc_list);
|
|
|
|
scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
|
|
test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning);
|
|
|
|
if (working || scanning)
|
|
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
|
|
else
|
|
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
|
|
|
|
if (active)
|
|
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
|
|
else
|
|
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
|
|
|
|
ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
|
|
|
|
if (working || scanning || active)
|
|
return __ieee80211_idle_off(local);
|
|
return __ieee80211_idle_on(local);
|
|
}
|
|
|
|
u32 ieee80211_idle_off(struct ieee80211_local *local)
|
|
{
|
|
return __ieee80211_recalc_idle(local, true);
|
|
}
|
|
|
|
void ieee80211_recalc_idle(struct ieee80211_local *local)
|
|
{
|
|
u32 change = __ieee80211_recalc_idle(local, false);
|
|
if (change)
|
|
ieee80211_hw_config(local, change);
|
|
}
|
|
|
|
static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr,
|
|
bool check_dup)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_sub_if_data *iter;
|
|
u64 new, mask, tmp;
|
|
u8 *m;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
|
|
return 0;
|
|
|
|
m = addr;
|
|
new = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
|
|
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
|
|
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
|
|
|
|
m = local->hw.wiphy->addr_mask;
|
|
mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
|
|
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
|
|
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
|
|
|
|
if (!check_dup)
|
|
return ret;
|
|
|
|
list_for_each_entry(iter, &local->interfaces, list) {
|
|
if (iter == sdata)
|
|
continue;
|
|
|
|
if (iter->vif.type == NL80211_IFTYPE_MONITOR &&
|
|
!(iter->u.mntr.flags & MONITOR_FLAG_ACTIVE))
|
|
continue;
|
|
|
|
m = iter->vif.addr;
|
|
tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
|
|
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
|
|
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
|
|
|
|
if ((new & ~mask) != (tmp & ~mask)) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ieee80211_can_powered_addr_change(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_roc_work *roc;
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_sub_if_data *scan_sdata;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
/* To be the most flexible here we want to only limit changing the
|
|
* address if the specific interface is doing offchannel work or
|
|
* scanning.
|
|
*/
|
|
if (netif_carrier_ok(sdata->dev))
|
|
return -EBUSY;
|
|
|
|
/* First check no ROC work is happening on this iface */
|
|
list_for_each_entry(roc, &local->roc_list, list) {
|
|
if (roc->sdata != sdata)
|
|
continue;
|
|
|
|
if (roc->started) {
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
}
|
|
|
|
/* And if this iface is scanning */
|
|
if (local->scanning) {
|
|
scan_sdata = rcu_dereference_protected(local->scan_sdata,
|
|
lockdep_is_held(&local->hw.wiphy->mtx));
|
|
if (sdata == scan_sdata)
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
/* More interface types could be added here but changing the
|
|
* address while powered makes the most sense in client modes.
|
|
*/
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
|
|
unlock:
|
|
return ret;
|
|
}
|
|
|
|
static int _ieee80211_change_mac(struct ieee80211_sub_if_data *sdata,
|
|
void *addr)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct sockaddr *sa = addr;
|
|
bool check_dup = true;
|
|
bool live = false;
|
|
int ret;
|
|
|
|
if (ieee80211_sdata_running(sdata)) {
|
|
ret = ieee80211_can_powered_addr_change(sdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
live = true;
|
|
}
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR &&
|
|
!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE))
|
|
check_dup = false;
|
|
|
|
ret = ieee80211_verify_mac(sdata, sa->sa_data, check_dup);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (live)
|
|
drv_remove_interface(local, sdata);
|
|
ret = eth_mac_addr(sdata->dev, sa);
|
|
|
|
if (ret == 0) {
|
|
memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
|
|
ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr);
|
|
}
|
|
|
|
/* Regardless of eth_mac_addr() return we still want to add the
|
|
* interface back. This should not fail...
|
|
*/
|
|
if (live)
|
|
WARN_ON(drv_add_interface(local, sdata));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ieee80211_change_mac(struct net_device *dev, void *addr)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
struct ieee80211_local *local = sdata->local;
|
|
int ret;
|
|
|
|
/*
|
|
* This happens during unregistration if there's a bond device
|
|
* active (maybe other cases?) and we must get removed from it.
|
|
* But we really don't care anymore if it's not registered now.
|
|
*/
|
|
if (!dev->ieee80211_ptr->registered)
|
|
return 0;
|
|
|
|
wiphy_lock(local->hw.wiphy);
|
|
ret = _ieee80211_change_mac(sdata, addr);
|
|
wiphy_unlock(local->hw.wiphy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int identical_mac_addr_allowed(int type1, int type2)
|
|
{
|
|
return type1 == NL80211_IFTYPE_MONITOR ||
|
|
type2 == NL80211_IFTYPE_MONITOR ||
|
|
type1 == NL80211_IFTYPE_P2P_DEVICE ||
|
|
type2 == NL80211_IFTYPE_P2P_DEVICE ||
|
|
(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
|
|
(type1 == NL80211_IFTYPE_AP_VLAN &&
|
|
(type2 == NL80211_IFTYPE_AP ||
|
|
type2 == NL80211_IFTYPE_AP_VLAN));
|
|
}
|
|
|
|
static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
|
|
enum nl80211_iftype iftype)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_sub_if_data *nsdata;
|
|
|
|
ASSERT_RTNL();
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
/* we hold the RTNL here so can safely walk the list */
|
|
list_for_each_entry(nsdata, &local->interfaces, list) {
|
|
if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
|
|
/*
|
|
* Only OCB and monitor mode may coexist
|
|
*/
|
|
if ((sdata->vif.type == NL80211_IFTYPE_OCB &&
|
|
nsdata->vif.type != NL80211_IFTYPE_MONITOR) ||
|
|
(sdata->vif.type != NL80211_IFTYPE_MONITOR &&
|
|
nsdata->vif.type == NL80211_IFTYPE_OCB))
|
|
return -EBUSY;
|
|
|
|
/*
|
|
* Allow only a single IBSS interface to be up at any
|
|
* time. This is restricted because beacon distribution
|
|
* cannot work properly if both are in the same IBSS.
|
|
*
|
|
* To remove this restriction we'd have to disallow them
|
|
* from setting the same SSID on different IBSS interfaces
|
|
* belonging to the same hardware. Then, however, we're
|
|
* faced with having to adopt two different TSF timers...
|
|
*/
|
|
if (iftype == NL80211_IFTYPE_ADHOC &&
|
|
nsdata->vif.type == NL80211_IFTYPE_ADHOC)
|
|
return -EBUSY;
|
|
/*
|
|
* will not add another interface while any channel
|
|
* switch is active.
|
|
*/
|
|
if (nsdata->vif.bss_conf.csa_active)
|
|
return -EBUSY;
|
|
|
|
/*
|
|
* The remaining checks are only performed for interfaces
|
|
* with the same MAC address.
|
|
*/
|
|
if (!ether_addr_equal(sdata->vif.addr,
|
|
nsdata->vif.addr))
|
|
continue;
|
|
|
|
/*
|
|
* check whether it may have the same address
|
|
*/
|
|
if (!identical_mac_addr_allowed(iftype,
|
|
nsdata->vif.type))
|
|
return -ENOTUNIQ;
|
|
|
|
/* No support for VLAN with MLO yet */
|
|
if (iftype == NL80211_IFTYPE_AP_VLAN &&
|
|
sdata->wdev.use_4addr &&
|
|
nsdata->vif.type == NL80211_IFTYPE_AP &&
|
|
nsdata->vif.valid_links)
|
|
return -EOPNOTSUPP;
|
|
|
|
/*
|
|
* can only add VLANs to enabled APs
|
|
*/
|
|
if (iftype == NL80211_IFTYPE_AP_VLAN &&
|
|
nsdata->vif.type == NL80211_IFTYPE_AP)
|
|
sdata->bss = &nsdata->u.ap;
|
|
}
|
|
}
|
|
|
|
return ieee80211_check_combinations(sdata, NULL, 0, 0);
|
|
}
|
|
|
|
static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata,
|
|
enum nl80211_iftype iftype)
|
|
{
|
|
int n_queues = sdata->local->hw.queues;
|
|
int i;
|
|
|
|
if (iftype == NL80211_IFTYPE_NAN)
|
|
return 0;
|
|
|
|
if (iftype != NL80211_IFTYPE_P2P_DEVICE) {
|
|
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
|
|
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
|
|
IEEE80211_INVAL_HW_QUEUE))
|
|
return -EINVAL;
|
|
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
|
|
n_queues))
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if ((iftype != NL80211_IFTYPE_AP &&
|
|
iftype != NL80211_IFTYPE_P2P_GO &&
|
|
iftype != NL80211_IFTYPE_MESH_POINT) ||
|
|
!ieee80211_hw_check(&sdata->local->hw, QUEUE_CONTROL)) {
|
|
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
|
|
return 0;
|
|
}
|
|
|
|
if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ieee80211_open(struct net_device *dev)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
int err;
|
|
|
|
/* fail early if user set an invalid address */
|
|
if (!is_valid_ether_addr(dev->dev_addr))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
wiphy_lock(sdata->local->hw.wiphy);
|
|
err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = ieee80211_do_open(&sdata->wdev, true);
|
|
out:
|
|
wiphy_unlock(sdata->local->hw.wiphy);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, bool going_down)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
unsigned long flags;
|
|
struct sk_buff *skb, *tmp;
|
|
u32 hw_reconf_flags = 0;
|
|
int i, flushed;
|
|
struct ps_data *ps;
|
|
struct cfg80211_chan_def chandef;
|
|
bool cancel_scan;
|
|
struct cfg80211_nan_func *func;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
|
|
synchronize_rcu(); /* flush _ieee80211_wake_txqs() */
|
|
|
|
cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata;
|
|
if (cancel_scan)
|
|
ieee80211_scan_cancel(local);
|
|
|
|
ieee80211_roc_purge(local, sdata);
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
ieee80211_mgd_stop(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
ieee80211_ibss_stop(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES)
|
|
break;
|
|
list_del_rcu(&sdata->u.mntr.list);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Remove all stations associated with this interface.
|
|
*
|
|
* This must be done before calling ops->remove_interface()
|
|
* because otherwise we can later invoke ops->sta_notify()
|
|
* whenever the STAs are removed, and that invalidates driver
|
|
* assumptions about always getting a vif pointer that is valid
|
|
* (because if we remove a STA after ops->remove_interface()
|
|
* the driver will have removed the vif info already!)
|
|
*
|
|
* For AP_VLANs stations may exist since there's nothing else that
|
|
* would have removed them, but in other modes there shouldn't
|
|
* be any stations.
|
|
*/
|
|
flushed = sta_info_flush(sdata);
|
|
WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP_VLAN && flushed > 0);
|
|
|
|
/* don't count this interface for allmulti while it is down */
|
|
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
|
|
atomic_dec(&local->iff_allmultis);
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP) {
|
|
local->fif_pspoll--;
|
|
local->fif_probe_req--;
|
|
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
|
|
local->fif_probe_req--;
|
|
}
|
|
|
|
if (sdata->dev) {
|
|
netif_addr_lock_bh(sdata->dev);
|
|
spin_lock_bh(&local->filter_lock);
|
|
__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
|
|
sdata->dev->addr_len);
|
|
spin_unlock_bh(&local->filter_lock);
|
|
netif_addr_unlock_bh(sdata->dev);
|
|
}
|
|
|
|
del_timer_sync(&local->dynamic_ps_timer);
|
|
wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work);
|
|
|
|
WARN(ieee80211_vif_is_mld(&sdata->vif),
|
|
"destroying interface with valid links 0x%04x\n",
|
|
sdata->vif.valid_links);
|
|
|
|
sdata->vif.bss_conf.csa_active = false;
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION)
|
|
sdata->deflink.u.mgd.csa_waiting_bcn = false;
|
|
if (sdata->deflink.csa_block_tx) {
|
|
ieee80211_wake_vif_queues(local, sdata,
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
sdata->deflink.csa_block_tx = false;
|
|
}
|
|
|
|
wiphy_work_cancel(local->hw.wiphy, &sdata->deflink.csa_finalize_work);
|
|
wiphy_work_cancel(local->hw.wiphy,
|
|
&sdata->deflink.color_change_finalize_work);
|
|
wiphy_delayed_work_cancel(local->hw.wiphy,
|
|
&sdata->deflink.dfs_cac_timer_work);
|
|
|
|
if (sdata->wdev.cac_started) {
|
|
chandef = sdata->vif.bss_conf.chanreq.oper;
|
|
WARN_ON(local->suspended);
|
|
ieee80211_link_release_channel(&sdata->deflink);
|
|
cfg80211_cac_event(sdata->dev, &chandef,
|
|
NL80211_RADAR_CAC_ABORTED,
|
|
GFP_KERNEL);
|
|
}
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP) {
|
|
WARN_ON(!list_empty(&sdata->u.ap.vlans));
|
|
} else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
|
|
/* remove all packets in parent bc_buf pointing to this dev */
|
|
ps = &sdata->bss->ps;
|
|
|
|
spin_lock_irqsave(&ps->bc_buf.lock, flags);
|
|
skb_queue_walk_safe(&ps->bc_buf, skb, tmp) {
|
|
if (skb->dev == sdata->dev) {
|
|
__skb_unlink(skb, &ps->bc_buf);
|
|
local->total_ps_buffered--;
|
|
ieee80211_free_txskb(&local->hw, skb);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&ps->bc_buf.lock, flags);
|
|
}
|
|
|
|
if (going_down)
|
|
local->open_count--;
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
list_del(&sdata->u.vlan.list);
|
|
RCU_INIT_POINTER(sdata->vif.bss_conf.chanctx_conf, NULL);
|
|
/* see comment in the default case below */
|
|
ieee80211_free_keys(sdata, true);
|
|
/* no need to tell driver */
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) {
|
|
local->cooked_mntrs--;
|
|
break;
|
|
}
|
|
|
|
local->monitors--;
|
|
if (local->monitors == 0) {
|
|
local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
|
|
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
|
|
}
|
|
|
|
ieee80211_adjust_monitor_flags(sdata, -1);
|
|
break;
|
|
case NL80211_IFTYPE_NAN:
|
|
/* clean all the functions */
|
|
spin_lock_bh(&sdata->u.nan.func_lock);
|
|
|
|
idr_for_each_entry(&sdata->u.nan.function_inst_ids, func, i) {
|
|
idr_remove(&sdata->u.nan.function_inst_ids, i);
|
|
cfg80211_free_nan_func(func);
|
|
}
|
|
idr_destroy(&sdata->u.nan.function_inst_ids);
|
|
|
|
spin_unlock_bh(&sdata->u.nan.func_lock);
|
|
break;
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
/* relies on synchronize_rcu() below */
|
|
RCU_INIT_POINTER(local->p2p_sdata, NULL);
|
|
fallthrough;
|
|
default:
|
|
wiphy_work_cancel(sdata->local->hw.wiphy, &sdata->work);
|
|
/*
|
|
* When we get here, the interface is marked down.
|
|
* Free the remaining keys, if there are any
|
|
* (which can happen in AP mode if userspace sets
|
|
* keys before the interface is operating)
|
|
*
|
|
* Force the key freeing to always synchronize_net()
|
|
* to wait for the RX path in case it is using this
|
|
* interface enqueuing frames at this very time on
|
|
* another CPU.
|
|
*/
|
|
ieee80211_free_keys(sdata, true);
|
|
skb_queue_purge(&sdata->skb_queue);
|
|
skb_queue_purge(&sdata->status_queue);
|
|
}
|
|
|
|
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
|
|
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
|
|
skb_queue_walk_safe(&local->pending[i], skb, tmp) {
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
if (info->control.vif == &sdata->vif) {
|
|
__skb_unlink(skb, &local->pending[i]);
|
|
ieee80211_free_txskb(&local->hw, skb);
|
|
}
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
|
|
ieee80211_txq_remove_vlan(local, sdata);
|
|
|
|
sdata->bss = NULL;
|
|
|
|
if (local->open_count == 0)
|
|
ieee80211_clear_tx_pending(local);
|
|
|
|
sdata->vif.bss_conf.beacon_int = 0;
|
|
|
|
/*
|
|
* If the interface goes down while suspended, presumably because
|
|
* the device was unplugged and that happens before our resume,
|
|
* then the driver is already unconfigured and the remainder of
|
|
* this function isn't needed.
|
|
* XXX: what about WoWLAN? If the device has software state, e.g.
|
|
* memory allocated, it might expect teardown commands from
|
|
* mac80211 here?
|
|
*/
|
|
if (local->suspended) {
|
|
WARN_ON(local->wowlan);
|
|
WARN_ON(rcu_access_pointer(local->monitor_sdata));
|
|
return;
|
|
}
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (local->monitors == 0)
|
|
ieee80211_del_virtual_monitor(local);
|
|
|
|
ieee80211_recalc_idle(local);
|
|
|
|
if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE))
|
|
break;
|
|
|
|
fallthrough;
|
|
default:
|
|
if (going_down)
|
|
drv_remove_interface(local, sdata);
|
|
}
|
|
|
|
ieee80211_recalc_ps(local);
|
|
|
|
if (cancel_scan)
|
|
wiphy_delayed_work_flush(local->hw.wiphy, &local->scan_work);
|
|
|
|
if (local->open_count == 0) {
|
|
ieee80211_stop_device(local);
|
|
|
|
/* no reconfiguring after stop! */
|
|
return;
|
|
}
|
|
|
|
/* do after stop to avoid reconfiguring when we stop anyway */
|
|
ieee80211_configure_filter(local);
|
|
ieee80211_hw_config(local, hw_reconf_flags);
|
|
|
|
if (local->monitors == local->open_count)
|
|
ieee80211_add_virtual_monitor(local);
|
|
}
|
|
|
|
static void ieee80211_stop_mbssid(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_sub_if_data *tx_sdata, *non_tx_sdata, *tmp_sdata;
|
|
struct ieee80211_vif *tx_vif = sdata->vif.mbssid_tx_vif;
|
|
|
|
if (!tx_vif)
|
|
return;
|
|
|
|
tx_sdata = vif_to_sdata(tx_vif);
|
|
sdata->vif.mbssid_tx_vif = NULL;
|
|
|
|
list_for_each_entry_safe(non_tx_sdata, tmp_sdata,
|
|
&tx_sdata->local->interfaces, list) {
|
|
if (non_tx_sdata != sdata && non_tx_sdata != tx_sdata &&
|
|
non_tx_sdata->vif.mbssid_tx_vif == tx_vif &&
|
|
ieee80211_sdata_running(non_tx_sdata)) {
|
|
non_tx_sdata->vif.mbssid_tx_vif = NULL;
|
|
dev_close(non_tx_sdata->wdev.netdev);
|
|
}
|
|
}
|
|
|
|
if (sdata != tx_sdata && ieee80211_sdata_running(tx_sdata)) {
|
|
tx_sdata->vif.mbssid_tx_vif = NULL;
|
|
dev_close(tx_sdata->wdev.netdev);
|
|
}
|
|
}
|
|
|
|
static int ieee80211_stop(struct net_device *dev)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
|
|
/* close dependent VLAN and MBSSID interfaces before locking wiphy */
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP) {
|
|
struct ieee80211_sub_if_data *vlan, *tmpsdata;
|
|
|
|
list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
|
|
u.vlan.list)
|
|
dev_close(vlan->dev);
|
|
|
|
ieee80211_stop_mbssid(sdata);
|
|
}
|
|
|
|
wiphy_lock(sdata->local->hw.wiphy);
|
|
wiphy_work_cancel(sdata->local->hw.wiphy, &sdata->activate_links_work);
|
|
|
|
ieee80211_do_stop(sdata, true);
|
|
wiphy_unlock(sdata->local->hw.wiphy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ieee80211_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
struct ieee80211_local *local = sdata->local;
|
|
int allmulti, sdata_allmulti;
|
|
|
|
allmulti = !!(dev->flags & IFF_ALLMULTI);
|
|
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
|
|
|
|
if (allmulti != sdata_allmulti) {
|
|
if (dev->flags & IFF_ALLMULTI)
|
|
atomic_inc(&local->iff_allmultis);
|
|
else
|
|
atomic_dec(&local->iff_allmultis);
|
|
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
|
|
}
|
|
|
|
spin_lock_bh(&local->filter_lock);
|
|
__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
|
|
spin_unlock_bh(&local->filter_lock);
|
|
wiphy_work_queue(local->hw.wiphy, &local->reconfig_filter);
|
|
}
|
|
|
|
/*
|
|
* Called when the netdev is removed or, by the code below, before
|
|
* the interface type changes.
|
|
*/
|
|
static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
/* free extra data */
|
|
ieee80211_free_keys(sdata, false);
|
|
|
|
ieee80211_debugfs_remove_netdev(sdata);
|
|
|
|
ieee80211_destroy_frag_cache(&sdata->frags);
|
|
|
|
if (ieee80211_vif_is_mesh(&sdata->vif))
|
|
ieee80211_mesh_teardown_sdata(sdata);
|
|
|
|
ieee80211_vif_clear_links(sdata);
|
|
ieee80211_link_stop(&sdata->deflink);
|
|
}
|
|
|
|
static void ieee80211_uninit(struct net_device *dev)
|
|
{
|
|
ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev));
|
|
}
|
|
|
|
static void
|
|
ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
|
|
{
|
|
dev_fetch_sw_netstats(stats, dev->tstats);
|
|
}
|
|
|
|
static int ieee80211_netdev_setup_tc(struct net_device *dev,
|
|
enum tc_setup_type type, void *type_data)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
return drv_net_setup_tc(local, sdata, dev, type, type_data);
|
|
}
|
|
|
|
static const struct net_device_ops ieee80211_dataif_ops = {
|
|
.ndo_open = ieee80211_open,
|
|
.ndo_stop = ieee80211_stop,
|
|
.ndo_uninit = ieee80211_uninit,
|
|
.ndo_start_xmit = ieee80211_subif_start_xmit,
|
|
.ndo_set_rx_mode = ieee80211_set_multicast_list,
|
|
.ndo_set_mac_address = ieee80211_change_mac,
|
|
.ndo_get_stats64 = ieee80211_get_stats64,
|
|
.ndo_setup_tc = ieee80211_netdev_setup_tc,
|
|
};
|
|
|
|
static u16 ieee80211_monitor_select_queue(struct net_device *dev,
|
|
struct sk_buff *skb,
|
|
struct net_device *sb_dev)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_hdr *hdr;
|
|
int len_rthdr;
|
|
|
|
if (local->hw.queues < IEEE80211_NUM_ACS)
|
|
return 0;
|
|
|
|
/* reset flags and info before parsing radiotap header */
|
|
memset(info, 0, sizeof(*info));
|
|
|
|
if (!ieee80211_parse_tx_radiotap(skb, dev))
|
|
return 0; /* doesn't matter, frame will be dropped */
|
|
|
|
len_rthdr = ieee80211_get_radiotap_len(skb->data);
|
|
hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
|
|
if (skb->len < len_rthdr + 2 ||
|
|
skb->len < len_rthdr + ieee80211_hdrlen(hdr->frame_control))
|
|
return 0; /* doesn't matter, frame will be dropped */
|
|
|
|
return ieee80211_select_queue_80211(sdata, skb, hdr);
|
|
}
|
|
|
|
static const struct net_device_ops ieee80211_monitorif_ops = {
|
|
.ndo_open = ieee80211_open,
|
|
.ndo_stop = ieee80211_stop,
|
|
.ndo_uninit = ieee80211_uninit,
|
|
.ndo_start_xmit = ieee80211_monitor_start_xmit,
|
|
.ndo_set_rx_mode = ieee80211_set_multicast_list,
|
|
.ndo_set_mac_address = ieee80211_change_mac,
|
|
.ndo_select_queue = ieee80211_monitor_select_queue,
|
|
.ndo_get_stats64 = ieee80211_get_stats64,
|
|
};
|
|
|
|
static int ieee80211_netdev_fill_forward_path(struct net_device_path_ctx *ctx,
|
|
struct net_device_path *path)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
struct ieee80211_local *local;
|
|
struct sta_info *sta;
|
|
int ret = -ENOENT;
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(ctx->dev);
|
|
local = sdata->local;
|
|
|
|
if (!local->ops->net_fill_forward_path)
|
|
return -EOPNOTSUPP;
|
|
|
|
rcu_read_lock();
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
sta = rcu_dereference(sdata->u.vlan.sta);
|
|
if (sta)
|
|
break;
|
|
if (sdata->wdev.use_4addr)
|
|
goto out;
|
|
if (is_multicast_ether_addr(ctx->daddr))
|
|
goto out;
|
|
sta = sta_info_get_bss(sdata, ctx->daddr);
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
if (is_multicast_ether_addr(ctx->daddr))
|
|
goto out;
|
|
sta = sta_info_get(sdata, ctx->daddr);
|
|
break;
|
|
case NL80211_IFTYPE_STATION:
|
|
if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) {
|
|
sta = sta_info_get(sdata, ctx->daddr);
|
|
if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
|
|
if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
|
|
goto out;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
sta = sta_info_get(sdata, sdata->deflink.u.mgd.bssid);
|
|
break;
|
|
default:
|
|
goto out;
|
|
}
|
|
|
|
if (!sta)
|
|
goto out;
|
|
|
|
ret = drv_net_fill_forward_path(local, sdata, &sta->sta, ctx, path);
|
|
out:
|
|
rcu_read_unlock();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops ieee80211_dataif_8023_ops = {
|
|
.ndo_open = ieee80211_open,
|
|
.ndo_stop = ieee80211_stop,
|
|
.ndo_uninit = ieee80211_uninit,
|
|
.ndo_start_xmit = ieee80211_subif_start_xmit_8023,
|
|
.ndo_set_rx_mode = ieee80211_set_multicast_list,
|
|
.ndo_set_mac_address = ieee80211_change_mac,
|
|
.ndo_get_stats64 = ieee80211_get_stats64,
|
|
.ndo_fill_forward_path = ieee80211_netdev_fill_forward_path,
|
|
.ndo_setup_tc = ieee80211_netdev_setup_tc,
|
|
};
|
|
|
|
static bool ieee80211_iftype_supports_hdr_offload(enum nl80211_iftype iftype)
|
|
{
|
|
switch (iftype) {
|
|
/* P2P GO and client are mapped to AP/STATION types */
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_STATION:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool ieee80211_set_sdata_offload_flags(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
u32 flags;
|
|
|
|
flags = sdata->vif.offload_flags;
|
|
|
|
if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) &&
|
|
ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) {
|
|
flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED;
|
|
|
|
if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) &&
|
|
local->hw.wiphy->frag_threshold != (u32)-1)
|
|
flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
|
|
|
|
if (local->monitors)
|
|
flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
|
|
} else {
|
|
flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
|
|
}
|
|
|
|
if (ieee80211_hw_check(&local->hw, SUPPORTS_RX_DECAP_OFFLOAD) &&
|
|
ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) {
|
|
flags |= IEEE80211_OFFLOAD_DECAP_ENABLED;
|
|
|
|
if (local->monitors &&
|
|
!ieee80211_hw_check(&local->hw, SUPPORTS_CONC_MON_RX_DECAP))
|
|
flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED;
|
|
} else {
|
|
flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED;
|
|
}
|
|
|
|
if (sdata->vif.offload_flags == flags)
|
|
return false;
|
|
|
|
sdata->vif.offload_flags = flags;
|
|
ieee80211_check_fast_rx_iface(sdata);
|
|
return true;
|
|
}
|
|
|
|
static void ieee80211_set_vif_encap_ops(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_sub_if_data *bss = sdata;
|
|
bool enabled;
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
|
|
if (!sdata->bss)
|
|
return;
|
|
|
|
bss = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap);
|
|
}
|
|
|
|
if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) ||
|
|
!ieee80211_iftype_supports_hdr_offload(bss->vif.type))
|
|
return;
|
|
|
|
enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED;
|
|
if (sdata->wdev.use_4addr &&
|
|
!(bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_4ADDR))
|
|
enabled = false;
|
|
|
|
sdata->dev->netdev_ops = enabled ? &ieee80211_dataif_8023_ops :
|
|
&ieee80211_dataif_ops;
|
|
}
|
|
|
|
static void ieee80211_recalc_sdata_offload(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_sub_if_data *vsdata;
|
|
|
|
if (ieee80211_set_sdata_offload_flags(sdata)) {
|
|
drv_update_vif_offload(local, sdata);
|
|
ieee80211_set_vif_encap_ops(sdata);
|
|
}
|
|
|
|
list_for_each_entry(vsdata, &local->interfaces, list) {
|
|
if (vsdata->vif.type != NL80211_IFTYPE_AP_VLAN ||
|
|
vsdata->bss != &sdata->u.ap)
|
|
continue;
|
|
|
|
ieee80211_set_vif_encap_ops(vsdata);
|
|
}
|
|
}
|
|
|
|
void ieee80211_recalc_offload(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD))
|
|
return;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (!ieee80211_sdata_running(sdata))
|
|
continue;
|
|
|
|
ieee80211_recalc_sdata_offload(sdata);
|
|
}
|
|
}
|
|
|
|
void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
|
|
const int offset)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
u32 flags = sdata->u.mntr.flags;
|
|
|
|
#define ADJUST(_f, _s) do { \
|
|
if (flags & MONITOR_FLAG_##_f) \
|
|
local->fif_##_s += offset; \
|
|
} while (0)
|
|
|
|
ADJUST(FCSFAIL, fcsfail);
|
|
ADJUST(PLCPFAIL, plcpfail);
|
|
ADJUST(CONTROL, control);
|
|
ADJUST(CONTROL, pspoll);
|
|
ADJUST(OTHER_BSS, other_bss);
|
|
|
|
#undef ADJUST
|
|
}
|
|
|
|
static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
int i;
|
|
|
|
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
|
|
if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL))
|
|
sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE;
|
|
else if (local->hw.queues >= IEEE80211_NUM_ACS)
|
|
sdata->vif.hw_queue[i] = i;
|
|
else
|
|
sdata->vif.hw_queue[i] = 0;
|
|
}
|
|
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
|
|
}
|
|
|
|
static void ieee80211_sdata_init(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
sdata->local = local;
|
|
|
|
/*
|
|
* Initialize the default link, so we can use link_id 0 for non-MLD,
|
|
* and that continues to work for non-MLD-aware drivers that use just
|
|
* vif.bss_conf instead of vif.link_conf.
|
|
*
|
|
* Note that we never change this, so if link ID 0 isn't used in an
|
|
* MLD connection, we get a separate allocation for it.
|
|
*/
|
|
ieee80211_link_init(sdata, -1, &sdata->deflink, &sdata->vif.bss_conf);
|
|
}
|
|
|
|
int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
int ret;
|
|
|
|
if (!ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF))
|
|
return 0;
|
|
|
|
ASSERT_RTNL();
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
if (local->monitor_sdata)
|
|
return 0;
|
|
|
|
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
|
|
if (!sdata)
|
|
return -ENOMEM;
|
|
|
|
/* set up data */
|
|
sdata->vif.type = NL80211_IFTYPE_MONITOR;
|
|
snprintf(sdata->name, IFNAMSIZ, "%s-monitor",
|
|
wiphy_name(local->hw.wiphy));
|
|
sdata->wdev.iftype = NL80211_IFTYPE_MONITOR;
|
|
sdata->wdev.wiphy = local->hw.wiphy;
|
|
|
|
ieee80211_sdata_init(local, sdata);
|
|
|
|
ieee80211_set_default_queues(sdata);
|
|
|
|
ret = drv_add_interface(local, sdata);
|
|
if (WARN_ON(ret)) {
|
|
/* ok .. stupid driver, it asked for this! */
|
|
kfree(sdata);
|
|
return ret;
|
|
}
|
|
|
|
set_bit(SDATA_STATE_RUNNING, &sdata->state);
|
|
|
|
ret = ieee80211_check_queues(sdata, NL80211_IFTYPE_MONITOR);
|
|
if (ret) {
|
|
kfree(sdata);
|
|
return ret;
|
|
}
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
rcu_assign_pointer(local->monitor_sdata, sdata);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
ret = ieee80211_link_use_channel(&sdata->deflink, &local->monitor_chanreq,
|
|
IEEE80211_CHANCTX_EXCLUSIVE);
|
|
if (ret) {
|
|
mutex_lock(&local->iflist_mtx);
|
|
RCU_INIT_POINTER(local->monitor_sdata, NULL);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
synchronize_net();
|
|
drv_remove_interface(local, sdata);
|
|
kfree(sdata);
|
|
return ret;
|
|
}
|
|
|
|
skb_queue_head_init(&sdata->skb_queue);
|
|
skb_queue_head_init(&sdata->status_queue);
|
|
wiphy_work_init(&sdata->work, ieee80211_iface_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
if (!ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF))
|
|
return;
|
|
|
|
ASSERT_RTNL();
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
|
|
sdata = rcu_dereference_protected(local->monitor_sdata,
|
|
lockdep_is_held(&local->iflist_mtx));
|
|
if (!sdata) {
|
|
mutex_unlock(&local->iflist_mtx);
|
|
return;
|
|
}
|
|
|
|
RCU_INIT_POINTER(local->monitor_sdata, NULL);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
synchronize_net();
|
|
|
|
ieee80211_link_release_channel(&sdata->deflink);
|
|
|
|
drv_remove_interface(local, sdata);
|
|
|
|
kfree(sdata);
|
|
}
|
|
|
|
/*
|
|
* NOTE: Be very careful when changing this function, it must NOT return
|
|
* an error on interface type changes that have been pre-checked, so most
|
|
* checks should be in ieee80211_check_concurrent_iface.
|
|
*/
|
|
int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
|
|
struct net_device *dev = wdev->netdev;
|
|
struct ieee80211_local *local = sdata->local;
|
|
u64 changed = 0;
|
|
int res;
|
|
u32 hw_reconf_flags = 0;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP_VLAN: {
|
|
struct ieee80211_sub_if_data *master;
|
|
|
|
if (!sdata->bss)
|
|
return -ENOLINK;
|
|
|
|
list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
|
|
|
|
master = container_of(sdata->bss,
|
|
struct ieee80211_sub_if_data, u.ap);
|
|
sdata->control_port_protocol =
|
|
master->control_port_protocol;
|
|
sdata->control_port_no_encrypt =
|
|
master->control_port_no_encrypt;
|
|
sdata->control_port_over_nl80211 =
|
|
master->control_port_over_nl80211;
|
|
sdata->control_port_no_preauth =
|
|
master->control_port_no_preauth;
|
|
sdata->vif.cab_queue = master->vif.cab_queue;
|
|
memcpy(sdata->vif.hw_queue, master->vif.hw_queue,
|
|
sizeof(sdata->vif.hw_queue));
|
|
sdata->vif.bss_conf.chanreq = master->vif.bss_conf.chanreq;
|
|
|
|
sdata->crypto_tx_tailroom_needed_cnt +=
|
|
master->crypto_tx_tailroom_needed_cnt;
|
|
|
|
break;
|
|
}
|
|
case NL80211_IFTYPE_AP:
|
|
sdata->bss = &sdata->u.ap;
|
|
break;
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_MONITOR:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
case NL80211_IFTYPE_OCB:
|
|
case NL80211_IFTYPE_NAN:
|
|
/* no special treatment */
|
|
break;
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
case NUM_NL80211_IFTYPES:
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
case NL80211_IFTYPE_WDS:
|
|
/* cannot happen */
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
|
|
if (local->open_count == 0) {
|
|
/* here we can consider everything in good order (again) */
|
|
local->reconfig_failure = false;
|
|
|
|
res = drv_start(local);
|
|
if (res)
|
|
goto err_del_bss;
|
|
ieee80211_led_radio(local, true);
|
|
ieee80211_mod_tpt_led_trig(local,
|
|
IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
|
|
}
|
|
|
|
/*
|
|
* Copy the hopefully now-present MAC address to
|
|
* this interface, if it has the special null one.
|
|
*/
|
|
if (dev && is_zero_ether_addr(dev->dev_addr)) {
|
|
eth_hw_addr_set(dev, local->hw.wiphy->perm_addr);
|
|
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
|
|
|
|
if (!is_valid_ether_addr(dev->dev_addr)) {
|
|
res = -EADDRNOTAVAIL;
|
|
goto err_stop;
|
|
}
|
|
}
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
/* no need to tell driver, but set carrier and chanctx */
|
|
if (sdata->bss->active) {
|
|
ieee80211_link_vlan_copy_chanctx(&sdata->deflink);
|
|
netif_carrier_on(dev);
|
|
ieee80211_set_vif_encap_ops(sdata);
|
|
} else {
|
|
netif_carrier_off(dev);
|
|
}
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) {
|
|
local->cooked_mntrs++;
|
|
break;
|
|
}
|
|
|
|
if (sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) {
|
|
res = drv_add_interface(local, sdata);
|
|
if (res)
|
|
goto err_stop;
|
|
} else if (local->monitors == 0 && local->open_count == 0) {
|
|
res = ieee80211_add_virtual_monitor(local);
|
|
if (res)
|
|
goto err_stop;
|
|
}
|
|
|
|
/* must be before the call to ieee80211_configure_filter */
|
|
local->monitors++;
|
|
if (local->monitors == 1) {
|
|
local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
|
|
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
|
|
}
|
|
|
|
ieee80211_adjust_monitor_flags(sdata, 1);
|
|
ieee80211_configure_filter(local);
|
|
ieee80211_recalc_offload(local);
|
|
ieee80211_recalc_idle(local);
|
|
|
|
netif_carrier_on(dev);
|
|
break;
|
|
default:
|
|
if (coming_up) {
|
|
ieee80211_del_virtual_monitor(local);
|
|
ieee80211_set_sdata_offload_flags(sdata);
|
|
|
|
res = drv_add_interface(local, sdata);
|
|
if (res)
|
|
goto err_stop;
|
|
|
|
ieee80211_set_vif_encap_ops(sdata);
|
|
res = ieee80211_check_queues(sdata,
|
|
ieee80211_vif_type_p2p(&sdata->vif));
|
|
if (res)
|
|
goto err_del_interface;
|
|
}
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP) {
|
|
local->fif_pspoll++;
|
|
local->fif_probe_req++;
|
|
|
|
ieee80211_configure_filter(local);
|
|
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
|
|
local->fif_probe_req++;
|
|
}
|
|
|
|
if (sdata->vif.probe_req_reg)
|
|
drv_config_iface_filter(local, sdata,
|
|
FIF_PROBE_REQ,
|
|
FIF_PROBE_REQ);
|
|
|
|
if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE &&
|
|
sdata->vif.type != NL80211_IFTYPE_NAN)
|
|
changed |= ieee80211_reset_erp_info(sdata);
|
|
ieee80211_link_info_change_notify(sdata, &sdata->deflink,
|
|
changed);
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
case NL80211_IFTYPE_OCB:
|
|
netif_carrier_off(dev);
|
|
break;
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
case NL80211_IFTYPE_NAN:
|
|
break;
|
|
default:
|
|
/* not reached */
|
|
WARN_ON(1);
|
|
}
|
|
|
|
/*
|
|
* Set default queue parameters so drivers don't
|
|
* need to initialise the hardware if the hardware
|
|
* doesn't start up with sane defaults.
|
|
* Enable QoS for anything but station interfaces.
|
|
*/
|
|
ieee80211_set_wmm_default(&sdata->deflink, true,
|
|
sdata->vif.type != NL80211_IFTYPE_STATION);
|
|
}
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
rcu_assign_pointer(local->p2p_sdata, sdata);
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES)
|
|
break;
|
|
list_add_tail_rcu(&sdata->u.mntr.list, &local->mon_list);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* set_multicast_list will be invoked by the networking core
|
|
* which will check whether any increments here were done in
|
|
* error and sync them down to the hardware as filter flags.
|
|
*/
|
|
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
|
|
atomic_inc(&local->iff_allmultis);
|
|
|
|
if (coming_up)
|
|
local->open_count++;
|
|
|
|
if (local->open_count == 1)
|
|
ieee80211_hw_conf_init(local);
|
|
else if (hw_reconf_flags)
|
|
ieee80211_hw_config(local, hw_reconf_flags);
|
|
|
|
ieee80211_recalc_ps(local);
|
|
|
|
set_bit(SDATA_STATE_RUNNING, &sdata->state);
|
|
|
|
return 0;
|
|
err_del_interface:
|
|
drv_remove_interface(local, sdata);
|
|
err_stop:
|
|
if (!local->open_count)
|
|
drv_stop(local);
|
|
err_del_bss:
|
|
sdata->bss = NULL;
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
|
|
list_del(&sdata->u.vlan.list);
|
|
/* might already be clear but that doesn't matter */
|
|
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
|
|
return res;
|
|
}
|
|
|
|
static void ieee80211_if_free(struct net_device *dev)
|
|
{
|
|
free_percpu(dev->tstats);
|
|
}
|
|
|
|
static void ieee80211_if_setup(struct net_device *dev)
|
|
{
|
|
ether_setup(dev);
|
|
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
|
|
dev->priv_flags |= IFF_NO_QUEUE;
|
|
dev->netdev_ops = &ieee80211_dataif_ops;
|
|
dev->needs_free_netdev = true;
|
|
dev->priv_destructor = ieee80211_if_free;
|
|
}
|
|
|
|
static void ieee80211_iface_process_skb(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)skb->data;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
if (ieee80211_is_action(mgmt->frame_control) &&
|
|
mgmt->u.action.category == WLAN_CATEGORY_BACK) {
|
|
struct sta_info *sta;
|
|
int len = skb->len;
|
|
|
|
sta = sta_info_get_bss(sdata, mgmt->sa);
|
|
if (sta) {
|
|
switch (mgmt->u.action.u.addba_req.action_code) {
|
|
case WLAN_ACTION_ADDBA_REQ:
|
|
ieee80211_process_addba_request(local, sta,
|
|
mgmt, len);
|
|
break;
|
|
case WLAN_ACTION_ADDBA_RESP:
|
|
ieee80211_process_addba_resp(local, sta,
|
|
mgmt, len);
|
|
break;
|
|
case WLAN_ACTION_DELBA:
|
|
ieee80211_process_delba(sdata, sta,
|
|
mgmt, len);
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
}
|
|
} else if (ieee80211_is_action(mgmt->frame_control) &&
|
|
mgmt->u.action.category == WLAN_CATEGORY_VHT) {
|
|
switch (mgmt->u.action.u.vht_group_notif.action_code) {
|
|
case WLAN_VHT_ACTION_OPMODE_NOTIF: {
|
|
struct ieee80211_rx_status *status;
|
|
enum nl80211_band band;
|
|
struct sta_info *sta;
|
|
u8 opmode;
|
|
|
|
status = IEEE80211_SKB_RXCB(skb);
|
|
band = status->band;
|
|
opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
|
|
|
|
sta = sta_info_get_bss(sdata, mgmt->sa);
|
|
|
|
if (sta)
|
|
ieee80211_vht_handle_opmode(sdata,
|
|
&sta->deflink,
|
|
opmode, band);
|
|
|
|
break;
|
|
}
|
|
case WLAN_VHT_ACTION_GROUPID_MGMT:
|
|
ieee80211_process_mu_groups(sdata, &sdata->deflink,
|
|
mgmt);
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
} else if (ieee80211_is_action(mgmt->frame_control) &&
|
|
mgmt->u.action.category == WLAN_CATEGORY_S1G) {
|
|
switch (mgmt->u.action.u.s1g.action_code) {
|
|
case WLAN_S1G_TWT_TEARDOWN:
|
|
case WLAN_S1G_TWT_SETUP:
|
|
ieee80211_s1g_rx_twt_action(sdata, skb);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else if (ieee80211_is_action(mgmt->frame_control) &&
|
|
mgmt->u.action.category == WLAN_CATEGORY_PROTECTED_EHT) {
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
|
|
switch (mgmt->u.action.u.ttlm_req.action_code) {
|
|
case WLAN_PROTECTED_EHT_ACTION_TTLM_REQ:
|
|
ieee80211_process_neg_ttlm_req(sdata, mgmt,
|
|
skb->len);
|
|
break;
|
|
case WLAN_PROTECTED_EHT_ACTION_TTLM_RES:
|
|
ieee80211_process_neg_ttlm_res(sdata, mgmt,
|
|
skb->len);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
} else if (ieee80211_is_ext(mgmt->frame_control)) {
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION)
|
|
ieee80211_sta_rx_queued_ext(sdata, skb);
|
|
else
|
|
WARN_ON(1);
|
|
} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
|
|
struct ieee80211_hdr *hdr = (void *)mgmt;
|
|
struct sta_info *sta;
|
|
|
|
/*
|
|
* So the frame isn't mgmt, but frame_control
|
|
* is at the right place anyway, of course, so
|
|
* the if statement is correct.
|
|
*
|
|
* Warn if we have other data frame types here,
|
|
* they must not get here.
|
|
*/
|
|
WARN_ON(hdr->frame_control &
|
|
cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
|
|
WARN_ON(!(hdr->seq_ctrl &
|
|
cpu_to_le16(IEEE80211_SCTL_FRAG)));
|
|
/*
|
|
* This was a fragment of a frame, received while
|
|
* a block-ack session was active. That cannot be
|
|
* right, so terminate the session.
|
|
*/
|
|
sta = sta_info_get_bss(sdata, mgmt->sa);
|
|
if (sta) {
|
|
u16 tid = ieee80211_get_tid(hdr);
|
|
|
|
__ieee80211_stop_rx_ba_session(
|
|
sta, tid, WLAN_BACK_RECIPIENT,
|
|
WLAN_REASON_QSTA_REQUIRE_SETUP,
|
|
true);
|
|
}
|
|
} else switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
ieee80211_sta_rx_queued_mgmt(sdata, skb);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
ieee80211_ibss_rx_queued_mgmt(sdata, skb);
|
|
break;
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
if (!ieee80211_vif_is_mesh(&sdata->vif))
|
|
break;
|
|
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
|
|
break;
|
|
default:
|
|
WARN(1, "frame for unexpected interface type");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ieee80211_iface_process_status(struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)skb->data;
|
|
|
|
if (ieee80211_is_action(mgmt->frame_control) &&
|
|
mgmt->u.action.category == WLAN_CATEGORY_S1G) {
|
|
switch (mgmt->u.action.u.s1g.action_code) {
|
|
case WLAN_S1G_TWT_TEARDOWN:
|
|
case WLAN_S1G_TWT_SETUP:
|
|
ieee80211_s1g_status_twt_action(sdata, skb);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ieee80211_iface_work(struct wiphy *wiphy, struct wiphy_work *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data, work);
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct sk_buff *skb;
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
return;
|
|
|
|
if (test_bit(SCAN_SW_SCANNING, &local->scanning))
|
|
return;
|
|
|
|
if (!ieee80211_can_run_worker(local))
|
|
return;
|
|
|
|
/* first process frames */
|
|
while ((skb = skb_dequeue(&sdata->skb_queue))) {
|
|
kcov_remote_start_common(skb_get_kcov_handle(skb));
|
|
|
|
if (skb->protocol == cpu_to_be16(ETH_P_TDLS))
|
|
ieee80211_process_tdls_channel_switch(sdata, skb);
|
|
else
|
|
ieee80211_iface_process_skb(local, sdata, skb);
|
|
|
|
kfree_skb(skb);
|
|
kcov_remote_stop();
|
|
}
|
|
|
|
/* process status queue */
|
|
while ((skb = skb_dequeue(&sdata->status_queue))) {
|
|
kcov_remote_start_common(skb_get_kcov_handle(skb));
|
|
|
|
ieee80211_iface_process_status(sdata, skb);
|
|
kfree_skb(skb);
|
|
|
|
kcov_remote_stop();
|
|
}
|
|
|
|
/* then other type-dependent work */
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
ieee80211_sta_work(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
ieee80211_ibss_work(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
if (!ieee80211_vif_is_mesh(&sdata->vif))
|
|
break;
|
|
ieee80211_mesh_work(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_OCB:
|
|
ieee80211_ocb_work(sdata);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ieee80211_activate_links_work(struct wiphy *wiphy,
|
|
struct wiphy_work *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
activate_links_work);
|
|
|
|
ieee80211_set_active_links(&sdata->vif, sdata->desired_active_links);
|
|
}
|
|
|
|
/*
|
|
* Helper function to initialise an interface to a specific type.
|
|
*/
|
|
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
|
|
enum nl80211_iftype type)
|
|
{
|
|
static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff};
|
|
|
|
/* clear type-dependent unions */
|
|
memset(&sdata->u, 0, sizeof(sdata->u));
|
|
memset(&sdata->deflink.u, 0, sizeof(sdata->deflink.u));
|
|
|
|
/* and set some type-dependent values */
|
|
sdata->vif.type = type;
|
|
sdata->vif.p2p = false;
|
|
sdata->wdev.iftype = type;
|
|
|
|
sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
|
|
sdata->control_port_no_encrypt = false;
|
|
sdata->control_port_over_nl80211 = false;
|
|
sdata->control_port_no_preauth = false;
|
|
sdata->vif.cfg.idle = true;
|
|
sdata->vif.bss_conf.txpower = INT_MIN; /* unset */
|
|
|
|
sdata->noack_map = 0;
|
|
|
|
/* only monitor/p2p-device differ */
|
|
if (sdata->dev) {
|
|
sdata->dev->netdev_ops = &ieee80211_dataif_ops;
|
|
sdata->dev->type = ARPHRD_ETHER;
|
|
}
|
|
|
|
skb_queue_head_init(&sdata->skb_queue);
|
|
skb_queue_head_init(&sdata->status_queue);
|
|
wiphy_work_init(&sdata->work, ieee80211_iface_work);
|
|
wiphy_work_init(&sdata->activate_links_work,
|
|
ieee80211_activate_links_work);
|
|
|
|
switch (type) {
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
type = NL80211_IFTYPE_AP;
|
|
sdata->vif.type = type;
|
|
sdata->vif.p2p = true;
|
|
fallthrough;
|
|
case NL80211_IFTYPE_AP:
|
|
skb_queue_head_init(&sdata->u.ap.ps.bc_buf);
|
|
INIT_LIST_HEAD(&sdata->u.ap.vlans);
|
|
sdata->vif.bss_conf.bssid = sdata->vif.addr;
|
|
break;
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
type = NL80211_IFTYPE_STATION;
|
|
sdata->vif.type = type;
|
|
sdata->vif.p2p = true;
|
|
fallthrough;
|
|
case NL80211_IFTYPE_STATION:
|
|
sdata->vif.bss_conf.bssid = sdata->deflink.u.mgd.bssid;
|
|
ieee80211_sta_setup_sdata(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_OCB:
|
|
sdata->vif.bss_conf.bssid = bssid_wildcard;
|
|
ieee80211_ocb_setup_sdata(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
|
|
ieee80211_ibss_setup_sdata(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_MESH_POINT:
|
|
if (ieee80211_vif_is_mesh(&sdata->vif))
|
|
ieee80211_mesh_init_sdata(sdata);
|
|
break;
|
|
case NL80211_IFTYPE_MONITOR:
|
|
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
|
|
sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
|
|
sdata->u.mntr.flags = MONITOR_FLAG_CONTROL |
|
|
MONITOR_FLAG_OTHER_BSS;
|
|
break;
|
|
case NL80211_IFTYPE_NAN:
|
|
idr_init(&sdata->u.nan.function_inst_ids);
|
|
spin_lock_init(&sdata->u.nan.func_lock);
|
|
sdata->vif.bss_conf.bssid = sdata->vif.addr;
|
|
break;
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
case NL80211_IFTYPE_P2P_DEVICE:
|
|
sdata->vif.bss_conf.bssid = sdata->vif.addr;
|
|
break;
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
case NL80211_IFTYPE_WDS:
|
|
case NUM_NL80211_IFTYPES:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
|
|
/* need to do this after the switch so vif.type is correct */
|
|
ieee80211_link_setup(&sdata->deflink);
|
|
|
|
ieee80211_debugfs_recreate_netdev(sdata, false);
|
|
}
|
|
|
|
static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
|
|
enum nl80211_iftype type)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
int ret, err;
|
|
enum nl80211_iftype internal_type = type;
|
|
bool p2p = false;
|
|
|
|
ASSERT_RTNL();
|
|
|
|
if (!local->ops->change_interface)
|
|
return -EBUSY;
|
|
|
|
/* for now, don't support changing while links exist */
|
|
if (ieee80211_vif_is_mld(&sdata->vif))
|
|
return -EBUSY;
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_AP:
|
|
if (!list_empty(&sdata->u.ap.vlans))
|
|
return -EBUSY;
|
|
break;
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_OCB:
|
|
/*
|
|
* Could maybe also all others here?
|
|
* Just not sure how that interacts
|
|
* with the RX/config path e.g. for
|
|
* mesh.
|
|
*/
|
|
break;
|
|
default:
|
|
return -EBUSY;
|
|
}
|
|
|
|
switch (type) {
|
|
case NL80211_IFTYPE_AP:
|
|
case NL80211_IFTYPE_STATION:
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_OCB:
|
|
/*
|
|
* Could probably support everything
|
|
* but here.
|
|
*/
|
|
break;
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
p2p = true;
|
|
internal_type = NL80211_IFTYPE_STATION;
|
|
break;
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
p2p = true;
|
|
internal_type = NL80211_IFTYPE_AP;
|
|
break;
|
|
default:
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = ieee80211_check_concurrent_iface(sdata, internal_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ieee80211_stop_vif_queues(local, sdata,
|
|
IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE);
|
|
/* do_stop will synchronize_rcu() first thing */
|
|
ieee80211_do_stop(sdata, false);
|
|
|
|
ieee80211_teardown_sdata(sdata);
|
|
|
|
ieee80211_set_sdata_offload_flags(sdata);
|
|
ret = drv_change_interface(local, sdata, internal_type, p2p);
|
|
if (ret)
|
|
type = ieee80211_vif_type_p2p(&sdata->vif);
|
|
|
|
/*
|
|
* Ignore return value here, there's not much we can do since
|
|
* the driver changed the interface type internally already.
|
|
* The warnings will hopefully make driver authors fix it :-)
|
|
*/
|
|
ieee80211_check_queues(sdata, type);
|
|
|
|
ieee80211_setup_sdata(sdata, type);
|
|
ieee80211_set_vif_encap_ops(sdata);
|
|
|
|
err = ieee80211_do_open(&sdata->wdev, false);
|
|
WARN(err, "type change: do_open returned %d", err);
|
|
|
|
ieee80211_wake_vif_queues(local, sdata,
|
|
IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE);
|
|
return ret;
|
|
}
|
|
|
|
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
|
|
enum nl80211_iftype type)
|
|
{
|
|
int ret;
|
|
|
|
ASSERT_RTNL();
|
|
|
|
if (type == ieee80211_vif_type_p2p(&sdata->vif))
|
|
return 0;
|
|
|
|
if (ieee80211_sdata_running(sdata)) {
|
|
ret = ieee80211_runtime_change_iftype(sdata, type);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
/* Purge and reset type-dependent state. */
|
|
ieee80211_teardown_sdata(sdata);
|
|
ieee80211_setup_sdata(sdata, type);
|
|
}
|
|
|
|
/* reset some values that shouldn't be kept across type changes */
|
|
if (type == NL80211_IFTYPE_STATION)
|
|
sdata->u.mgd.use_4addr = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
|
|
u8 *perm_addr, enum nl80211_iftype type)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
u64 mask, start, addr, val, inc;
|
|
u8 *m;
|
|
u8 tmp_addr[ETH_ALEN];
|
|
int i;
|
|
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
/* default ... something at least */
|
|
memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
|
|
|
|
if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
|
|
local->hw.wiphy->n_addresses <= 1)
|
|
return;
|
|
|
|
switch (type) {
|
|
case NL80211_IFTYPE_MONITOR:
|
|
/* doesn't matter */
|
|
break;
|
|
case NL80211_IFTYPE_AP_VLAN:
|
|
/* match up with an AP interface */
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (sdata->vif.type != NL80211_IFTYPE_AP)
|
|
continue;
|
|
memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
|
|
break;
|
|
}
|
|
/* keep default if no AP interface present */
|
|
break;
|
|
case NL80211_IFTYPE_P2P_CLIENT:
|
|
case NL80211_IFTYPE_P2P_GO:
|
|
if (ieee80211_hw_check(&local->hw, P2P_DEV_ADDR_FOR_INTF)) {
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE)
|
|
continue;
|
|
if (!ieee80211_sdata_running(sdata))
|
|
continue;
|
|
memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
|
|
return;
|
|
}
|
|
}
|
|
fallthrough;
|
|
default:
|
|
/* assign a new address if possible -- try n_addresses first */
|
|
for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
|
|
bool used = false;
|
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (ether_addr_equal(local->hw.wiphy->addresses[i].addr,
|
|
sdata->vif.addr)) {
|
|
used = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!used) {
|
|
memcpy(perm_addr,
|
|
local->hw.wiphy->addresses[i].addr,
|
|
ETH_ALEN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* try mask if available */
|
|
if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
|
|
break;
|
|
|
|
m = local->hw.wiphy->addr_mask;
|
|
mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
|
|
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
|
|
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
|
|
|
|
if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
|
|
/* not a contiguous mask ... not handled now! */
|
|
pr_info("not contiguous\n");
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Pick address of existing interface in case user changed
|
|
* MAC address manually, default to perm_addr.
|
|
*/
|
|
m = local->hw.wiphy->perm_addr;
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
|
|
continue;
|
|
m = sdata->vif.addr;
|
|
break;
|
|
}
|
|
start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
|
|
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
|
|
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
|
|
|
|
inc = 1ULL<<__ffs64(mask);
|
|
val = (start & mask);
|
|
addr = (start & ~mask) | (val & mask);
|
|
do {
|
|
bool used = false;
|
|
|
|
tmp_addr[5] = addr >> 0*8;
|
|
tmp_addr[4] = addr >> 1*8;
|
|
tmp_addr[3] = addr >> 2*8;
|
|
tmp_addr[2] = addr >> 3*8;
|
|
tmp_addr[1] = addr >> 4*8;
|
|
tmp_addr[0] = addr >> 5*8;
|
|
|
|
val += inc;
|
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (ether_addr_equal(tmp_addr, sdata->vif.addr)) {
|
|
used = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!used) {
|
|
memcpy(perm_addr, tmp_addr, ETH_ALEN);
|
|
break;
|
|
}
|
|
addr = (start & ~mask) | (val & mask);
|
|
} while (addr != start);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
|
|
unsigned char name_assign_type,
|
|
struct wireless_dev **new_wdev, enum nl80211_iftype type,
|
|
struct vif_params *params)
|
|
{
|
|
struct net_device *ndev = NULL;
|
|
struct ieee80211_sub_if_data *sdata = NULL;
|
|
struct txq_info *txqi;
|
|
int ret, i;
|
|
|
|
ASSERT_RTNL();
|
|
lockdep_assert_wiphy(local->hw.wiphy);
|
|
|
|
if (type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN) {
|
|
struct wireless_dev *wdev;
|
|
|
|
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size,
|
|
GFP_KERNEL);
|
|
if (!sdata)
|
|
return -ENOMEM;
|
|
wdev = &sdata->wdev;
|
|
|
|
sdata->dev = NULL;
|
|
strscpy(sdata->name, name, IFNAMSIZ);
|
|
ieee80211_assign_perm_addr(local, wdev->address, type);
|
|
memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
|
|
ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr);
|
|
} else {
|
|
int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size,
|
|
sizeof(void *));
|
|
int txq_size = 0;
|
|
|
|
if (type != NL80211_IFTYPE_AP_VLAN &&
|
|
(type != NL80211_IFTYPE_MONITOR ||
|
|
(params->flags & MONITOR_FLAG_ACTIVE)))
|
|
txq_size += sizeof(struct txq_info) +
|
|
local->hw.txq_data_size;
|
|
|
|
ndev = alloc_netdev_mqs(size + txq_size,
|
|
name, name_assign_type,
|
|
ieee80211_if_setup, 1, 1);
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
|
|
|
|
ndev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
|
|
if (!ndev->tstats) {
|
|
free_netdev(ndev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ndev->needed_headroom = local->tx_headroom +
|
|
4*6 /* four MAC addresses */
|
|
+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
|
|
+ 6 /* mesh */
|
|
+ 8 /* rfc1042/bridge tunnel */
|
|
- ETH_HLEN /* ethernet hard_header_len */
|
|
+ IEEE80211_ENCRYPT_HEADROOM;
|
|
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
|
|
|
|
ret = dev_alloc_name(ndev, ndev->name);
|
|
if (ret < 0) {
|
|
ieee80211_if_free(ndev);
|
|
free_netdev(ndev);
|
|
return ret;
|
|
}
|
|
|
|
ieee80211_assign_perm_addr(local, ndev->perm_addr, type);
|
|
if (is_valid_ether_addr(params->macaddr))
|
|
eth_hw_addr_set(ndev, params->macaddr);
|
|
else
|
|
eth_hw_addr_set(ndev, ndev->perm_addr);
|
|
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
|
|
|
|
/* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */
|
|
sdata = netdev_priv(ndev);
|
|
ndev->ieee80211_ptr = &sdata->wdev;
|
|
memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
|
|
ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr);
|
|
memcpy(sdata->name, ndev->name, IFNAMSIZ);
|
|
|
|
if (txq_size) {
|
|
txqi = netdev_priv(ndev) + size;
|
|
ieee80211_txq_init(sdata, NULL, txqi, 0);
|
|
}
|
|
|
|
sdata->dev = ndev;
|
|
}
|
|
|
|
/* initialise type-independent data */
|
|
sdata->wdev.wiphy = local->hw.wiphy;
|
|
|
|
ieee80211_sdata_init(local, sdata);
|
|
|
|
ieee80211_init_frag_cache(&sdata->frags);
|
|
|
|
INIT_LIST_HEAD(&sdata->key_list);
|
|
|
|
wiphy_delayed_work_init(&sdata->dec_tailroom_needed_wk,
|
|
ieee80211_delayed_tailroom_dec);
|
|
|
|
for (i = 0; i < NUM_NL80211_BANDS; i++) {
|
|
struct ieee80211_supported_band *sband;
|
|
sband = local->hw.wiphy->bands[i];
|
|
sdata->rc_rateidx_mask[i] =
|
|
sband ? (1 << sband->n_bitrates) - 1 : 0;
|
|
if (sband) {
|
|
__le16 cap;
|
|
u16 *vht_rate_mask;
|
|
|
|
memcpy(sdata->rc_rateidx_mcs_mask[i],
|
|
sband->ht_cap.mcs.rx_mask,
|
|
sizeof(sdata->rc_rateidx_mcs_mask[i]));
|
|
|
|
cap = sband->vht_cap.vht_mcs.rx_mcs_map;
|
|
vht_rate_mask = sdata->rc_rateidx_vht_mcs_mask[i];
|
|
ieee80211_get_vht_mask_from_cap(cap, vht_rate_mask);
|
|
} else {
|
|
memset(sdata->rc_rateidx_mcs_mask[i], 0,
|
|
sizeof(sdata->rc_rateidx_mcs_mask[i]));
|
|
memset(sdata->rc_rateidx_vht_mcs_mask[i], 0,
|
|
sizeof(sdata->rc_rateidx_vht_mcs_mask[i]));
|
|
}
|
|
}
|
|
|
|
ieee80211_set_default_queues(sdata);
|
|
|
|
sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
|
|
sdata->deflink.user_power_level = local->user_power_level;
|
|
|
|
/* setup type-dependent data */
|
|
ieee80211_setup_sdata(sdata, type);
|
|
|
|
if (ndev) {
|
|
ndev->ieee80211_ptr->use_4addr = params->use_4addr;
|
|
if (type == NL80211_IFTYPE_STATION)
|
|
sdata->u.mgd.use_4addr = params->use_4addr;
|
|
|
|
ndev->features |= local->hw.netdev_features;
|
|
ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
|
|
ndev->hw_features |= ndev->features &
|
|
MAC80211_SUPPORTED_FEATURES_TX;
|
|
sdata->vif.netdev_features = local->hw.netdev_features;
|
|
|
|
netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
|
|
|
|
/* MTU range is normally 256 - 2304, where the upper limit is
|
|
* the maximum MSDU size. Monitor interfaces send and receive
|
|
* MPDU and A-MSDU frames which may be much larger so we do
|
|
* not impose an upper limit in that case.
|
|
*/
|
|
ndev->min_mtu = 256;
|
|
if (type == NL80211_IFTYPE_MONITOR)
|
|
ndev->max_mtu = 0;
|
|
else
|
|
ndev->max_mtu = local->hw.max_mtu;
|
|
|
|
ret = cfg80211_register_netdevice(ndev);
|
|
if (ret) {
|
|
free_netdev(ndev);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
list_add_tail_rcu(&sdata->list, &local->interfaces);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
if (new_wdev)
|
|
*new_wdev = &sdata->wdev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
ASSERT_RTNL();
|
|
lockdep_assert_wiphy(sdata->local->hw.wiphy);
|
|
|
|
mutex_lock(&sdata->local->iflist_mtx);
|
|
list_del_rcu(&sdata->list);
|
|
mutex_unlock(&sdata->local->iflist_mtx);
|
|
|
|
if (sdata->vif.txq)
|
|
ieee80211_txq_purge(sdata->local, to_txq_info(sdata->vif.txq));
|
|
|
|
synchronize_rcu();
|
|
|
|
cfg80211_unregister_wdev(&sdata->wdev);
|
|
|
|
if (!sdata->dev) {
|
|
ieee80211_teardown_sdata(sdata);
|
|
kfree(sdata);
|
|
}
|
|
}
|
|
|
|
void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state)))
|
|
return;
|
|
ieee80211_do_stop(sdata, true);
|
|
}
|
|
|
|
void ieee80211_remove_interfaces(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata, *tmp;
|
|
LIST_HEAD(unreg_list);
|
|
|
|
ASSERT_RTNL();
|
|
|
|
/* Before destroying the interfaces, make sure they're all stopped so
|
|
* that the hardware is stopped. Otherwise, the driver might still be
|
|
* iterating the interfaces during the shutdown, e.g. from a worker
|
|
* or from RX processing or similar, and if it does so (using atomic
|
|
* iteration) while we're manipulating the list, the iteration will
|
|
* crash.
|
|
*
|
|
* After this, the hardware should be stopped and the driver should
|
|
* have stopped all of its activities, so that we can do RCU-unaware
|
|
* manipulations of the interface list below.
|
|
*/
|
|
cfg80211_shutdown_all_interfaces(local->hw.wiphy);
|
|
|
|
wiphy_lock(local->hw.wiphy);
|
|
|
|
WARN(local->open_count, "%s: open count remains %d\n",
|
|
wiphy_name(local->hw.wiphy), local->open_count);
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
list_splice_init(&local->interfaces, &unreg_list);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
list_for_each_entry_safe(sdata, tmp, &unreg_list, list) {
|
|
bool netdev = sdata->dev;
|
|
|
|
/*
|
|
* Remove IP addresses explicitly, since the notifier will
|
|
* skip the callbacks if wdev->registered is false, since
|
|
* we can't acquire the wiphy_lock() again there if already
|
|
* inside this locked section.
|
|
*/
|
|
sdata->vif.cfg.arp_addr_cnt = 0;
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
|
|
sdata->u.mgd.associated)
|
|
ieee80211_vif_cfg_change_notify(sdata,
|
|
BSS_CHANGED_ARP_FILTER);
|
|
|
|
list_del(&sdata->list);
|
|
cfg80211_unregister_wdev(&sdata->wdev);
|
|
|
|
if (!netdev)
|
|
kfree(sdata);
|
|
}
|
|
wiphy_unlock(local->hw.wiphy);
|
|
}
|
|
|
|
static int netdev_notify(struct notifier_block *nb,
|
|
unsigned long state, void *ptr)
|
|
{
|
|
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
if (state != NETDEV_CHANGENAME)
|
|
return NOTIFY_DONE;
|
|
|
|
if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
|
|
return NOTIFY_DONE;
|
|
|
|
if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
|
|
return NOTIFY_DONE;
|
|
|
|
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
|
|
memcpy(sdata->name, dev->name, IFNAMSIZ);
|
|
ieee80211_debugfs_rename_netdev(sdata);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block mac80211_netdev_notifier = {
|
|
.notifier_call = netdev_notify,
|
|
};
|
|
|
|
int ieee80211_iface_init(void)
|
|
{
|
|
return register_netdevice_notifier(&mac80211_netdev_notifier);
|
|
}
|
|
|
|
void ieee80211_iface_exit(void)
|
|
{
|
|
unregister_netdevice_notifier(&mac80211_netdev_notifier);
|
|
}
|
|
|
|
void ieee80211_vif_inc_num_mcast(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP)
|
|
atomic_inc(&sdata->u.ap.num_mcast_sta);
|
|
else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
|
|
atomic_inc(&sdata->u.vlan.num_mcast_sta);
|
|
}
|
|
|
|
void ieee80211_vif_dec_num_mcast(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP)
|
|
atomic_dec(&sdata->u.ap.num_mcast_sta);
|
|
else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
|
|
atomic_dec(&sdata->u.vlan.num_mcast_sta);
|
|
}
|