iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/tools/testing/selftests/kvm/Makefile
David Matlack c33e05d9b0 KVM: selftests: Introduce access_tracking_perf_test 
This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.

To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.

Example invocation:

  $ ./access_tracking_perf_test -v 8
  Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
  guest physical test memory offset: 0xffdfffff000

  Populating memory             : 1.337752570s
  Writing to populated memory   : 0.010177640s
  Reading from populated memory : 0.009548239s
  Mark memory idle              : 23.973131748s
  Writing to idle memory        : 0.063584496s
  Mark memory idle              : 24.924652964s
  Reading from idle memory      : 0.062042814s

Breaking down the results:

 * "Populating memory": The time it takes for all vCPUs to perform the
   first write to every page in their region.

 * "Writing to populated memory" / "Reading from populated memory": The
   time it takes for all vCPUs to write and read to every page in their
   region after it has been populated. This serves as a control for the
   later results.

 * "Mark memory idle": The time it takes for every vCPU to mark every
   page in their region as idle through page_idle.

 * "Writing to idle memory" / "Reading from idle memory": The time it
   takes for all vCPUs to write and read to every page in their region
   after it has been marked idle.

This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.

Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27 16:59:00 -04:00

169 lines
6.6 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
include ../../../build/Build.include
all:
top_srcdir = ../../../..
KSFT_KHDR_INSTALL := 1
# For cross-builds to work, UNAME_M has to map to ARCH and arch specific
# directories and targets in this Makefile. "uname -m" doesn't map to
# arch specific sub-directory names.
#
# UNAME_M variable to used to run the compiles pointing to the right arch
# directories and build the right targets for these supported architectures.
#
# TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
# LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
#
# x86_64 targets are named to include x86_64 as a suffix and directories
# for includes are in x86_64 sub-directory. s390x and aarch64 follow the
# same convention. "uname -m" doesn't result in the correct mapping for
# s390x and aarch64.
#
# No change necessary for x86_64
UNAME_M := $(shell uname -m)
# Set UNAME_M for arm64 compile/install to work
ifeq ($(ARCH),arm64)
UNAME_M := aarch64
endif
# Set UNAME_M s390x compile/install to work
ifeq ($(ARCH),s390)
UNAME_M := s390x
endif
LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c
LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S
LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S
LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c
TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test
TEST_GEN_PROGS_x86_64 += x86_64/get_msr_index_features
TEST_GEN_PROGS_x86_64 += x86_64/evmcs_test
TEST_GEN_PROGS_x86_64 += x86_64/emulator_error_test
TEST_GEN_PROGS_x86_64 += x86_64/get_cpuid_test
TEST_GEN_PROGS_x86_64 += x86_64/hyperv_clock
TEST_GEN_PROGS_x86_64 += x86_64/hyperv_cpuid
TEST_GEN_PROGS_x86_64 += x86_64/hyperv_features
TEST_GEN_PROGS_x86_64 += x86_64/kvm_pv_test
TEST_GEN_PROGS_x86_64 += x86_64/mmio_warning_test
TEST_GEN_PROGS_x86_64 += x86_64/mmu_role_test
TEST_GEN_PROGS_x86_64 += x86_64/platform_info_test
TEST_GEN_PROGS_x86_64 += x86_64/set_boot_cpu_id
TEST_GEN_PROGS_x86_64 += x86_64/set_sregs_test
TEST_GEN_PROGS_x86_64 += x86_64/smm_test
TEST_GEN_PROGS_x86_64 += x86_64/state_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_preemption_timer_test
TEST_GEN_PROGS_x86_64 += x86_64/svm_vmcall_test
TEST_GEN_PROGS_x86_64 += x86_64/sync_regs_test
TEST_GEN_PROGS_x86_64 += x86_64/userspace_msr_exit_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_apic_access_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_close_while_nested_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_dirty_log_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_set_nested_state_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_tsc_adjust_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_nested_tsc_scaling_test
TEST_GEN_PROGS_x86_64 += x86_64/xapic_ipi_test
TEST_GEN_PROGS_x86_64 += x86_64/xss_msr_test
TEST_GEN_PROGS_x86_64 += x86_64/debug_regs
TEST_GEN_PROGS_x86_64 += x86_64/tsc_msrs_test
TEST_GEN_PROGS_x86_64 += x86_64/vmx_pmu_msrs_test
TEST_GEN_PROGS_x86_64 += x86_64/xen_shinfo_test
TEST_GEN_PROGS_x86_64 += x86_64/xen_vmcall_test
TEST_GEN_PROGS_x86_64 += access_tracking_perf_test
TEST_GEN_PROGS_x86_64 += demand_paging_test
TEST_GEN_PROGS_x86_64 += dirty_log_test
TEST_GEN_PROGS_x86_64 += dirty_log_perf_test
TEST_GEN_PROGS_x86_64 += hardware_disable_test
TEST_GEN_PROGS_x86_64 += kvm_create_max_vcpus
TEST_GEN_PROGS_x86_64 += kvm_page_table_test
TEST_GEN_PROGS_x86_64 += memslot_modification_stress_test
TEST_GEN_PROGS_x86_64 += memslot_perf_test
TEST_GEN_PROGS_x86_64 += set_memory_region_test
TEST_GEN_PROGS_x86_64 += steal_time
TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions
TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list
TEST_GEN_PROGS_aarch64 += aarch64/vgic_init
TEST_GEN_PROGS_aarch64 += demand_paging_test
TEST_GEN_PROGS_aarch64 += dirty_log_test
TEST_GEN_PROGS_aarch64 += dirty_log_perf_test
TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus
TEST_GEN_PROGS_aarch64 += kvm_page_table_test
TEST_GEN_PROGS_aarch64 += set_memory_region_test
TEST_GEN_PROGS_aarch64 += steal_time
TEST_GEN_PROGS_aarch64 += kvm_binary_stats_test
TEST_GEN_PROGS_s390x = s390x/memop
TEST_GEN_PROGS_s390x += s390x/resets
TEST_GEN_PROGS_s390x += s390x/sync_regs_test
TEST_GEN_PROGS_s390x += demand_paging_test
TEST_GEN_PROGS_s390x += dirty_log_test
TEST_GEN_PROGS_s390x += kvm_create_max_vcpus
TEST_GEN_PROGS_s390x += kvm_page_table_test
TEST_GEN_PROGS_s390x += set_memory_region_test
TEST_GEN_PROGS_s390x += kvm_binary_stats_test
TEST_GEN_PROGS += $(TEST_GEN_PROGS_$(UNAME_M))
LIBKVM += $(LIBKVM_$(UNAME_M))
INSTALL_HDR_PATH = $(top_srcdir)/usr
LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/
LINUX_TOOL_INCLUDE = $(top_srcdir)/tools/include
ifeq ($(ARCH),x86_64)
LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/x86/include
else
LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/$(ARCH)/include
endif
CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \
-fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) \
-I$(LINUX_TOOL_ARCH_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude \
-I$(<D) -Iinclude/$(UNAME_M) -I..
no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \
$(CC) -Werror -no-pie -x c - -o "$$TMP", -no-pie)
# On s390, build the testcases KVM-enabled
pgste-option = $(call try-run, echo 'int main() { return 0; }' | \
$(CC) -Werror -Wl$(comma)--s390-pgste -x c - -o "$$TMP",-Wl$(comma)--s390-pgste)
LDFLAGS += -pthread $(no-pie-option) $(pgste-option)
# After inclusion, $(OUTPUT) is defined and
# $(TEST_GEN_PROGS) starts with $(OUTPUT)/
include ../lib.mk
STATIC_LIBS := $(OUTPUT)/libkvm.a
LIBKVM_C := $(filter %.c,$(LIBKVM))
LIBKVM_S := $(filter %.S,$(LIBKVM))
LIBKVM_C_OBJ := $(patsubst %.c, $(OUTPUT)/%.o, $(LIBKVM_C))
LIBKVM_S_OBJ := $(patsubst %.S, $(OUTPUT)/%.o, $(LIBKVM_S))
EXTRA_CLEAN += $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ) $(STATIC_LIBS) cscope.*
x := $(shell mkdir -p $(sort $(dir $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ))))
$(LIBKVM_C_OBJ): $(OUTPUT)/%.o: %.c
$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $< -o $@
$(LIBKVM_S_OBJ): $(OUTPUT)/%.o: %.S
$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $< -o $@
LIBKVM_OBJS = $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ)
$(OUTPUT)/libkvm.a: $(LIBKVM_OBJS)
$(AR) crs $@ $^
x := $(shell mkdir -p $(sort $(dir $(TEST_GEN_PROGS))))
all: $(STATIC_LIBS)
$(TEST_GEN_PROGS): $(STATIC_LIBS)
cscope: include_paths = $(LINUX_TOOL_INCLUDE) $(LINUX_HDR_PATH) include lib ..
cscope:
$(RM) cscope.*
(find $(include_paths) -name '*.h' \
-exec realpath --relative-base=$(PWD) {} \;; \
find . -name '*.c' \
-exec realpath --relative-base=$(PWD) {} \;) | sort -u > cscope.files
cscope -b
Reference in New Issue View Git Blame Copy Permalink