72d00e560d
Since commitb09c68dc57
("clk: imx: pll14xx: Support dynamic rates"), the driver has the ability to dynamically compute PLL parameters to approximate the requested rates. This is not always used, because the logic is as follows: - Check if the target rate is hardcoded in the frequency table - Check if varying only kdiv is possible, so switch over is glitch free - Compute rate dynamically by iterating over pdiv range If we skip the frequency table for the 1443x PLL, we find that the computed values differ to the hardcoded ones. This can be valid if the hardcoded values guarantee for example an earlier lock-in or if the divisors are chosen, so that other important rates are more likely to be reached glitch-free. For rates (393216000 and 361267200, this doesn't seem to be the case: They are only approximated by existing parameters (393215995 and 361267196 Hz, respectively) and they aren't reachable glitch-free from other hardcoded frequencies. Dropping them from the table allows us to lock-in to these frequencies exactly. This is immediately noticeable because they are the assigned-clock-rates for IMX8MN_AUDIO_PLL1 and IMX8MN_AUDIO_PLL2, respectively and a look into clk_summary so far showed that they were a few Hz short of the target: imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary audio_pll2_out 0 0 0 361267196 0 0 50000 N audio_pll1_out 1 1 0 393215995 0 0 50000 Y and afterwards: imx8mn-board:~# grep audio_pll[12]_out /sys/kernel/debug/clk/clk_summary audio_pll2_out 0 0 0 361267200 0 0 50000 N audio_pll1_out 1 1 0 393216000 0 0 50000 Y This change is equivalent to adding following hardcoded values: /* rate mdiv pdiv sdiv kdiv */ PLL_1443X_RATE(393216000, 655, 5, 3, 23593), PLL_1443X_RATE(361267200, 497, 33, 0, -16882), Fixes:053a4ffe29
("clk: imx: imx8mm: fix audio pll setting") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230807084744.1184791-2-m.felsch@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
544 lines
14 KiB
C
544 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2017-2018 NXP.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "pll14xx: " fmt
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/err.h>
|
|
#include <linux/export.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include "clk.h"
|
|
|
|
#define GNRL_CTL 0x0
|
|
#define DIV_CTL0 0x4
|
|
#define DIV_CTL1 0x8
|
|
#define LOCK_STATUS BIT(31)
|
|
#define LOCK_SEL_MASK BIT(29)
|
|
#define CLKE_MASK BIT(11)
|
|
#define RST_MASK BIT(9)
|
|
#define BYPASS_MASK BIT(4)
|
|
#define MDIV_MASK GENMASK(21, 12)
|
|
#define PDIV_MASK GENMASK(9, 4)
|
|
#define SDIV_MASK GENMASK(2, 0)
|
|
#define KDIV_MASK GENMASK(15, 0)
|
|
#define KDIV_MIN SHRT_MIN
|
|
#define KDIV_MAX SHRT_MAX
|
|
|
|
#define LOCK_TIMEOUT_US 10000
|
|
|
|
struct clk_pll14xx {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
enum imx_pll14xx_type type;
|
|
const struct imx_pll14xx_rate_table *rate_table;
|
|
int rate_count;
|
|
};
|
|
|
|
#define to_clk_pll14xx(_hw) container_of(_hw, struct clk_pll14xx, hw)
|
|
|
|
static const struct imx_pll14xx_rate_table imx_pll1416x_tbl[] = {
|
|
PLL_1416X_RATE(1800000000U, 225, 3, 0),
|
|
PLL_1416X_RATE(1600000000U, 200, 3, 0),
|
|
PLL_1416X_RATE(1500000000U, 375, 3, 1),
|
|
PLL_1416X_RATE(1400000000U, 350, 3, 1),
|
|
PLL_1416X_RATE(1200000000U, 300, 3, 1),
|
|
PLL_1416X_RATE(1000000000U, 250, 3, 1),
|
|
PLL_1416X_RATE(800000000U, 200, 3, 1),
|
|
PLL_1416X_RATE(750000000U, 250, 2, 2),
|
|
PLL_1416X_RATE(700000000U, 350, 3, 2),
|
|
PLL_1416X_RATE(640000000U, 320, 3, 2),
|
|
PLL_1416X_RATE(600000000U, 300, 3, 2),
|
|
PLL_1416X_RATE(320000000U, 160, 3, 2),
|
|
};
|
|
|
|
static const struct imx_pll14xx_rate_table imx_pll1443x_tbl[] = {
|
|
PLL_1443X_RATE(1039500000U, 173, 2, 1, 16384),
|
|
PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
|
|
PLL_1443X_RATE(594000000U, 198, 2, 2, 0),
|
|
PLL_1443X_RATE(519750000U, 173, 2, 2, 16384),
|
|
};
|
|
|
|
struct imx_pll14xx_clk imx_1443x_pll = {
|
|
.type = PLL_1443X,
|
|
.rate_table = imx_pll1443x_tbl,
|
|
.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
|
|
};
|
|
EXPORT_SYMBOL_GPL(imx_1443x_pll);
|
|
|
|
struct imx_pll14xx_clk imx_1443x_dram_pll = {
|
|
.type = PLL_1443X,
|
|
.rate_table = imx_pll1443x_tbl,
|
|
.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
|
|
.flags = CLK_GET_RATE_NOCACHE,
|
|
};
|
|
EXPORT_SYMBOL_GPL(imx_1443x_dram_pll);
|
|
|
|
struct imx_pll14xx_clk imx_1416x_pll = {
|
|
.type = PLL_1416X,
|
|
.rate_table = imx_pll1416x_tbl,
|
|
.rate_count = ARRAY_SIZE(imx_pll1416x_tbl),
|
|
};
|
|
EXPORT_SYMBOL_GPL(imx_1416x_pll);
|
|
|
|
static const struct imx_pll14xx_rate_table *imx_get_pll_settings(
|
|
struct clk_pll14xx *pll, unsigned long rate)
|
|
{
|
|
const struct imx_pll14xx_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
for (i = 0; i < pll->rate_count; i++)
|
|
if (rate == rate_table[i].rate)
|
|
return &rate_table[i];
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static long pll14xx_calc_rate(struct clk_pll14xx *pll, int mdiv, int pdiv,
|
|
int sdiv, int kdiv, unsigned long prate)
|
|
{
|
|
u64 fvco = prate;
|
|
|
|
/* fvco = (m * 65536 + k) * Fin / (p * 65536) */
|
|
fvco *= (mdiv * 65536 + kdiv);
|
|
pdiv *= 65536;
|
|
|
|
do_div(fvco, pdiv << sdiv);
|
|
|
|
return fvco;
|
|
}
|
|
|
|
static long pll1443x_calc_kdiv(int mdiv, int pdiv, int sdiv,
|
|
unsigned long rate, unsigned long prate)
|
|
{
|
|
long kdiv;
|
|
|
|
/* calc kdiv = round(rate * pdiv * 65536 * 2^sdiv / prate) - (mdiv * 65536) */
|
|
kdiv = ((rate * ((pdiv * 65536) << sdiv) + prate / 2) / prate) - (mdiv * 65536);
|
|
|
|
return clamp_t(short, kdiv, KDIV_MIN, KDIV_MAX);
|
|
}
|
|
|
|
static void imx_pll14xx_calc_settings(struct clk_pll14xx *pll, unsigned long rate,
|
|
unsigned long prate, struct imx_pll14xx_rate_table *t)
|
|
{
|
|
u32 pll_div_ctl0, pll_div_ctl1;
|
|
int mdiv, pdiv, sdiv, kdiv;
|
|
long fvco, rate_min, rate_max, dist, best = LONG_MAX;
|
|
const struct imx_pll14xx_rate_table *tt;
|
|
|
|
/*
|
|
* Fractional PLL constrains:
|
|
*
|
|
* a) 1 <= p <= 63
|
|
* b) 64 <= m <= 1023
|
|
* c) 0 <= s <= 6
|
|
* d) -32768 <= k <= 32767
|
|
*
|
|
* fvco = (m * 65536 + k) * prate / (p * 65536)
|
|
*/
|
|
|
|
/* First try if we can get the desired rate from one of the static entries */
|
|
tt = imx_get_pll_settings(pll, rate);
|
|
if (tt) {
|
|
pr_debug("%s: in=%ld, want=%ld, Using PLL setting from table\n",
|
|
clk_hw_get_name(&pll->hw), prate, rate);
|
|
t->rate = tt->rate;
|
|
t->mdiv = tt->mdiv;
|
|
t->pdiv = tt->pdiv;
|
|
t->sdiv = tt->sdiv;
|
|
t->kdiv = tt->kdiv;
|
|
return;
|
|
}
|
|
|
|
pll_div_ctl0 = readl_relaxed(pll->base + DIV_CTL0);
|
|
mdiv = FIELD_GET(MDIV_MASK, pll_div_ctl0);
|
|
pdiv = FIELD_GET(PDIV_MASK, pll_div_ctl0);
|
|
sdiv = FIELD_GET(SDIV_MASK, pll_div_ctl0);
|
|
pll_div_ctl1 = readl_relaxed(pll->base + DIV_CTL1);
|
|
|
|
/* Then see if we can get the desired rate by only adjusting kdiv (glitch free) */
|
|
rate_min = pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, KDIV_MIN, prate);
|
|
rate_max = pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, KDIV_MAX, prate);
|
|
|
|
if (rate >= rate_min && rate <= rate_max) {
|
|
kdiv = pll1443x_calc_kdiv(mdiv, pdiv, sdiv, rate, prate);
|
|
pr_debug("%s: in=%ld, want=%ld Only adjust kdiv %ld -> %d\n",
|
|
clk_hw_get_name(&pll->hw), prate, rate,
|
|
FIELD_GET(KDIV_MASK, pll_div_ctl1), kdiv);
|
|
fvco = pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, kdiv, prate);
|
|
t->rate = (unsigned int)fvco;
|
|
t->mdiv = mdiv;
|
|
t->pdiv = pdiv;
|
|
t->sdiv = sdiv;
|
|
t->kdiv = kdiv;
|
|
return;
|
|
}
|
|
|
|
/* Finally calculate best values */
|
|
for (pdiv = 1; pdiv <= 63; pdiv++) {
|
|
for (sdiv = 0; sdiv <= 6; sdiv++) {
|
|
/* calc mdiv = round(rate * pdiv * 2^sdiv) / prate) */
|
|
mdiv = DIV_ROUND_CLOSEST(rate * (pdiv << sdiv), prate);
|
|
mdiv = clamp(mdiv, 64, 1023);
|
|
|
|
kdiv = pll1443x_calc_kdiv(mdiv, pdiv, sdiv, rate, prate);
|
|
fvco = pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, kdiv, prate);
|
|
|
|
/* best match */
|
|
dist = abs((long)rate - (long)fvco);
|
|
if (dist < best) {
|
|
best = dist;
|
|
t->rate = (unsigned int)fvco;
|
|
t->mdiv = mdiv;
|
|
t->pdiv = pdiv;
|
|
t->sdiv = sdiv;
|
|
t->kdiv = kdiv;
|
|
|
|
if (!dist)
|
|
goto found;
|
|
}
|
|
}
|
|
}
|
|
found:
|
|
pr_debug("%s: in=%ld, want=%ld got=%d (pdiv=%d sdiv=%d mdiv=%d kdiv=%d)\n",
|
|
clk_hw_get_name(&pll->hw), prate, rate, t->rate, t->pdiv, t->sdiv,
|
|
t->mdiv, t->kdiv);
|
|
}
|
|
|
|
static long clk_pll1416x_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
const struct imx_pll14xx_rate_table *rate_table = pll->rate_table;
|
|
int i;
|
|
|
|
/* Assuming rate_table is in descending order */
|
|
for (i = 0; i < pll->rate_count; i++)
|
|
if (rate >= rate_table[i].rate)
|
|
return rate_table[i].rate;
|
|
|
|
/* return minimum supported value */
|
|
return rate_table[pll->rate_count - 1].rate;
|
|
}
|
|
|
|
static long clk_pll1443x_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
struct imx_pll14xx_rate_table t;
|
|
|
|
imx_pll14xx_calc_settings(pll, rate, *prate, &t);
|
|
|
|
return t.rate;
|
|
}
|
|
|
|
static unsigned long clk_pll14xx_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
u32 mdiv, pdiv, sdiv, kdiv, pll_div_ctl0, pll_div_ctl1;
|
|
|
|
pll_div_ctl0 = readl_relaxed(pll->base + DIV_CTL0);
|
|
mdiv = FIELD_GET(MDIV_MASK, pll_div_ctl0);
|
|
pdiv = FIELD_GET(PDIV_MASK, pll_div_ctl0);
|
|
sdiv = FIELD_GET(SDIV_MASK, pll_div_ctl0);
|
|
|
|
if (pll->type == PLL_1443X) {
|
|
pll_div_ctl1 = readl_relaxed(pll->base + DIV_CTL1);
|
|
kdiv = (s16)FIELD_GET(KDIV_MASK, pll_div_ctl1);
|
|
} else {
|
|
kdiv = 0;
|
|
}
|
|
|
|
return pll14xx_calc_rate(pll, mdiv, pdiv, sdiv, kdiv, parent_rate);
|
|
}
|
|
|
|
static inline bool clk_pll14xx_mp_change(const struct imx_pll14xx_rate_table *rate,
|
|
u32 pll_div)
|
|
{
|
|
u32 old_mdiv, old_pdiv;
|
|
|
|
old_mdiv = FIELD_GET(MDIV_MASK, pll_div);
|
|
old_pdiv = FIELD_GET(PDIV_MASK, pll_div);
|
|
|
|
return rate->mdiv != old_mdiv || rate->pdiv != old_pdiv;
|
|
}
|
|
|
|
static int clk_pll14xx_wait_lock(struct clk_pll14xx *pll)
|
|
{
|
|
u32 val;
|
|
|
|
return readl_poll_timeout(pll->base + GNRL_CTL, val, val & LOCK_STATUS, 0,
|
|
LOCK_TIMEOUT_US);
|
|
}
|
|
|
|
static int clk_pll1416x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
const struct imx_pll14xx_rate_table *rate;
|
|
u32 tmp, div_val;
|
|
int ret;
|
|
|
|
rate = imx_get_pll_settings(pll, drate);
|
|
if (!rate) {
|
|
pr_err("Invalid rate %lu for pll clk %s\n", drate,
|
|
clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl_relaxed(pll->base + DIV_CTL0);
|
|
|
|
if (!clk_pll14xx_mp_change(rate, tmp)) {
|
|
tmp &= ~SDIV_MASK;
|
|
tmp |= FIELD_PREP(SDIV_MASK, rate->sdiv);
|
|
writel_relaxed(tmp, pll->base + DIV_CTL0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Bypass clock and set lock to pll output lock */
|
|
tmp = readl_relaxed(pll->base + GNRL_CTL);
|
|
tmp |= LOCK_SEL_MASK;
|
|
writel_relaxed(tmp, pll->base + GNRL_CTL);
|
|
|
|
/* Enable RST */
|
|
tmp &= ~RST_MASK;
|
|
writel_relaxed(tmp, pll->base + GNRL_CTL);
|
|
|
|
/* Enable BYPASS */
|
|
tmp |= BYPASS_MASK;
|
|
writel(tmp, pll->base + GNRL_CTL);
|
|
|
|
div_val = FIELD_PREP(MDIV_MASK, rate->mdiv) | FIELD_PREP(PDIV_MASK, rate->pdiv) |
|
|
FIELD_PREP(SDIV_MASK, rate->sdiv);
|
|
writel_relaxed(div_val, pll->base + DIV_CTL0);
|
|
|
|
/*
|
|
* According to SPEC, t3 - t2 need to be greater than
|
|
* 1us and 1/FREF, respectively.
|
|
* FREF is FIN / Prediv, the prediv is [1, 63], so choose
|
|
* 3us.
|
|
*/
|
|
udelay(3);
|
|
|
|
/* Disable RST */
|
|
tmp |= RST_MASK;
|
|
writel_relaxed(tmp, pll->base + GNRL_CTL);
|
|
|
|
/* Wait Lock */
|
|
ret = clk_pll14xx_wait_lock(pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Bypass */
|
|
tmp &= ~BYPASS_MASK;
|
|
writel_relaxed(tmp, pll->base + GNRL_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_pll1443x_set_rate(struct clk_hw *hw, unsigned long drate,
|
|
unsigned long prate)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
struct imx_pll14xx_rate_table rate;
|
|
u32 gnrl_ctl, div_ctl0;
|
|
int ret;
|
|
|
|
imx_pll14xx_calc_settings(pll, drate, prate, &rate);
|
|
|
|
div_ctl0 = readl_relaxed(pll->base + DIV_CTL0);
|
|
|
|
if (!clk_pll14xx_mp_change(&rate, div_ctl0)) {
|
|
/* only sdiv and/or kdiv changed - no need to RESET PLL */
|
|
div_ctl0 &= ~SDIV_MASK;
|
|
div_ctl0 |= FIELD_PREP(SDIV_MASK, rate.sdiv);
|
|
writel_relaxed(div_ctl0, pll->base + DIV_CTL0);
|
|
|
|
writel_relaxed(FIELD_PREP(KDIV_MASK, rate.kdiv),
|
|
pll->base + DIV_CTL1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Enable RST */
|
|
gnrl_ctl = readl_relaxed(pll->base + GNRL_CTL);
|
|
gnrl_ctl &= ~RST_MASK;
|
|
writel_relaxed(gnrl_ctl, pll->base + GNRL_CTL);
|
|
|
|
/* Enable BYPASS */
|
|
gnrl_ctl |= BYPASS_MASK;
|
|
writel_relaxed(gnrl_ctl, pll->base + GNRL_CTL);
|
|
|
|
div_ctl0 = FIELD_PREP(MDIV_MASK, rate.mdiv) |
|
|
FIELD_PREP(PDIV_MASK, rate.pdiv) |
|
|
FIELD_PREP(SDIV_MASK, rate.sdiv);
|
|
writel_relaxed(div_ctl0, pll->base + DIV_CTL0);
|
|
|
|
writel_relaxed(FIELD_PREP(KDIV_MASK, rate.kdiv), pll->base + DIV_CTL1);
|
|
|
|
/*
|
|
* According to SPEC, t3 - t2 need to be greater than
|
|
* 1us and 1/FREF, respectively.
|
|
* FREF is FIN / Prediv, the prediv is [1, 63], so choose
|
|
* 3us.
|
|
*/
|
|
udelay(3);
|
|
|
|
/* Disable RST */
|
|
gnrl_ctl |= RST_MASK;
|
|
writel_relaxed(gnrl_ctl, pll->base + GNRL_CTL);
|
|
|
|
/* Wait Lock*/
|
|
ret = clk_pll14xx_wait_lock(pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Bypass */
|
|
gnrl_ctl &= ~BYPASS_MASK;
|
|
writel_relaxed(gnrl_ctl, pll->base + GNRL_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_pll14xx_prepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
u32 val;
|
|
int ret;
|
|
|
|
/*
|
|
* RESETB = 1 from 0, PLL starts its normal
|
|
* operation after lock time
|
|
*/
|
|
val = readl_relaxed(pll->base + GNRL_CTL);
|
|
if (val & RST_MASK)
|
|
return 0;
|
|
val |= BYPASS_MASK;
|
|
writel_relaxed(val, pll->base + GNRL_CTL);
|
|
val |= RST_MASK;
|
|
writel_relaxed(val, pll->base + GNRL_CTL);
|
|
|
|
ret = clk_pll14xx_wait_lock(pll);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~BYPASS_MASK;
|
|
writel_relaxed(val, pll->base + GNRL_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int clk_pll14xx_is_prepared(struct clk_hw *hw)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(pll->base + GNRL_CTL);
|
|
|
|
return (val & RST_MASK) ? 1 : 0;
|
|
}
|
|
|
|
static void clk_pll14xx_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct clk_pll14xx *pll = to_clk_pll14xx(hw);
|
|
u32 val;
|
|
|
|
/*
|
|
* Set RST to 0, power down mode is enabled and
|
|
* every digital block is reset
|
|
*/
|
|
val = readl_relaxed(pll->base + GNRL_CTL);
|
|
val &= ~RST_MASK;
|
|
writel_relaxed(val, pll->base + GNRL_CTL);
|
|
}
|
|
|
|
static const struct clk_ops clk_pll1416x_ops = {
|
|
.prepare = clk_pll14xx_prepare,
|
|
.unprepare = clk_pll14xx_unprepare,
|
|
.is_prepared = clk_pll14xx_is_prepared,
|
|
.recalc_rate = clk_pll14xx_recalc_rate,
|
|
.round_rate = clk_pll1416x_round_rate,
|
|
.set_rate = clk_pll1416x_set_rate,
|
|
};
|
|
|
|
static const struct clk_ops clk_pll1416x_min_ops = {
|
|
.recalc_rate = clk_pll14xx_recalc_rate,
|
|
};
|
|
|
|
static const struct clk_ops clk_pll1443x_ops = {
|
|
.prepare = clk_pll14xx_prepare,
|
|
.unprepare = clk_pll14xx_unprepare,
|
|
.is_prepared = clk_pll14xx_is_prepared,
|
|
.recalc_rate = clk_pll14xx_recalc_rate,
|
|
.round_rate = clk_pll1443x_round_rate,
|
|
.set_rate = clk_pll1443x_set_rate,
|
|
};
|
|
|
|
struct clk_hw *imx_dev_clk_hw_pll14xx(struct device *dev, const char *name,
|
|
const char *parent_name, void __iomem *base,
|
|
const struct imx_pll14xx_clk *pll_clk)
|
|
{
|
|
struct clk_pll14xx *pll;
|
|
struct clk_hw *hw;
|
|
struct clk_init_data init;
|
|
int ret;
|
|
u32 val;
|
|
|
|
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
|
if (!pll)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.flags = pll_clk->flags;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
|
|
switch (pll_clk->type) {
|
|
case PLL_1416X:
|
|
if (!pll_clk->rate_table)
|
|
init.ops = &clk_pll1416x_min_ops;
|
|
else
|
|
init.ops = &clk_pll1416x_ops;
|
|
break;
|
|
case PLL_1443X:
|
|
init.ops = &clk_pll1443x_ops;
|
|
break;
|
|
default:
|
|
pr_err("Unknown pll type for pll clk %s\n", name);
|
|
kfree(pll);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
pll->base = base;
|
|
pll->hw.init = &init;
|
|
pll->type = pll_clk->type;
|
|
pll->rate_table = pll_clk->rate_table;
|
|
pll->rate_count = pll_clk->rate_count;
|
|
|
|
val = readl_relaxed(pll->base + GNRL_CTL);
|
|
val &= ~BYPASS_MASK;
|
|
writel_relaxed(val, pll->base + GNRL_CTL);
|
|
|
|
hw = &pll->hw;
|
|
|
|
ret = clk_hw_register(dev, hw);
|
|
if (ret) {
|
|
pr_err("failed to register pll %s %d\n", name, ret);
|
|
kfree(pll);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return hw;
|
|
}
|
|
EXPORT_SYMBOL_GPL(imx_dev_clk_hw_pll14xx);
|