64dbc3d55d
We can now init system timers using the dmtimer and 32k counter based on only devicetree data and drivers/clocksource timers. Let's configure the clocksource and clockevent, and drop the old unused platform data. As we're just dropping platform data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Since the dmtimer can use both 32k clock and system clock as the source, let's also configure the SoC specific default values. The board specific dts files can reconfigure these with assigned-clocks and assigned-clock-parents as needed. Let's also update the dts file to use #include while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
267 lines
5.8 KiB
Plaintext
267 lines
5.8 KiB
Plaintext
/*
|
|
* Device Tree Source for OMAP2420 SoC
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include "omap2.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,omap2420", "ti,omap2";
|
|
|
|
ocp {
|
|
l4: l4@48000000 {
|
|
compatible = "ti,omap2-l4", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x48000000 0x100000>;
|
|
|
|
prcm: prcm@8000 {
|
|
compatible = "ti,omap2-prcm";
|
|
reg = <0x8000 0x1000>;
|
|
|
|
prcm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prcm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
scm: scm@0 {
|
|
compatible = "ti,omap2-scm", "simple-bus";
|
|
reg = <0x0 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#pinctrl-cells = <1>;
|
|
ranges = <0 0x0 0x1000>;
|
|
|
|
omap2420_pmx: pinmux@30 {
|
|
compatible = "ti,omap2420-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x30 0x0113>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
pinctrl-single,register-width = <8>;
|
|
pinctrl-single,function-mask = <0x3f>;
|
|
};
|
|
|
|
scm_conf: scm_conf@270 {
|
|
compatible = "syscon";
|
|
reg = <0x270 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
scm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
scm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
target-module@4000 {
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x4000 0x4>,
|
|
<0x4004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>;
|
|
clocks = <&func_32k_ck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
|
|
counter32k: counter@0 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0 0x20>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@48018000 {
|
|
compatible = "ti,omap2-gpio";
|
|
reg = <0x48018000 0x200>;
|
|
interrupts = <29>;
|
|
ti,hwmods = "gpio1";
|
|
ti,gpio-always-on;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
gpio2: gpio@4801a000 {
|
|
compatible = "ti,omap2-gpio";
|
|
reg = <0x4801a000 0x200>;
|
|
interrupts = <30>;
|
|
ti,hwmods = "gpio2";
|
|
ti,gpio-always-on;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
gpio3: gpio@4801c000 {
|
|
compatible = "ti,omap2-gpio";
|
|
reg = <0x4801c000 0x200>;
|
|
interrupts = <31>;
|
|
ti,hwmods = "gpio3";
|
|
ti,gpio-always-on;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
gpio4: gpio@4801e000 {
|
|
compatible = "ti,omap2-gpio";
|
|
reg = <0x4801e000 0x200>;
|
|
interrupts = <32>;
|
|
ti,hwmods = "gpio4";
|
|
ti,gpio-always-on;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
gpmc: gpmc@6800a000 {
|
|
compatible = "ti,omap2420-gpmc";
|
|
reg = <0x6800a000 0x1000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupts = <20>;
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <4>;
|
|
ti,hwmods = "gpmc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
mcbsp1: mcbsp@48074000 {
|
|
compatible = "ti,omap2420-mcbsp";
|
|
reg = <0x48074000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <59>, /* TX interrupt */
|
|
<60>; /* RX interrupt */
|
|
interrupt-names = "tx", "rx";
|
|
ti,hwmods = "mcbsp1";
|
|
dmas = <&sdma 31>,
|
|
<&sdma 32>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp2: mcbsp@48076000 {
|
|
compatible = "ti,omap2420-mcbsp";
|
|
reg = <0x48076000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <62>, /* TX interrupt */
|
|
<63>; /* RX interrupt */
|
|
interrupt-names = "tx", "rx";
|
|
ti,hwmods = "mcbsp2";
|
|
dmas = <&sdma 33>,
|
|
<&sdma 34>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
msdi1: mmc@4809c000 {
|
|
compatible = "ti,omap2420-mmc";
|
|
ti,hwmods = "msdi1";
|
|
reg = <0x4809c000 0x80>;
|
|
interrupts = <83>;
|
|
dmas = <&sdma 61 &sdma 62>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mailbox: mailbox@48094000 {
|
|
compatible = "ti,omap2-mailbox";
|
|
reg = <0x48094000 0x200>;
|
|
interrupts = <26>, <34>;
|
|
interrupt-names = "dsp", "iva";
|
|
ti,hwmods = "mailbox";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <6>;
|
|
mbox_dsp: dsp {
|
|
ti,mbox-tx = <0 0 0>;
|
|
ti,mbox-rx = <1 0 0>;
|
|
};
|
|
mbox_iva: iva {
|
|
ti,mbox-tx = <2 1 3>;
|
|
ti,mbox-rx = <3 1 3>;
|
|
};
|
|
};
|
|
|
|
timer1_target: target-module@48028000 {
|
|
compatible = "ti,sysc-omap2-timer", "ti,sysc";
|
|
reg = <0x48028000 0x4>,
|
|
<0x48028010 0x4>,
|
|
<0x48028014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_EMUFREE |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
clocks = <&gpt1_fck>, <&gpt1_ick>;
|
|
clock-names = "fck", "ick";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x48028000 0x1000>;
|
|
|
|
timer1: timer@0 {
|
|
compatible = "ti,omap2420-timer";
|
|
reg = <0 0x400>;
|
|
interrupts = <37>;
|
|
ti,timer-alwon;
|
|
};
|
|
};
|
|
|
|
wd_timer2: wdt@48022000 {
|
|
compatible = "ti,omap2-wdt";
|
|
ti,hwmods = "wd_timer2";
|
|
reg = <0x48022000 0x80>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
compatible = "ti,omap2420-i2c";
|
|
};
|
|
|
|
&i2c2 {
|
|
compatible = "ti,omap2420-i2c";
|
|
};
|
|
|
|
#include "omap24xx-clocks.dtsi"
|
|
#include "omap2420-clocks.dtsi"
|
|
|
|
/* Preferred always-on timer for clockevent */
|
|
&timer1_target {
|
|
ti,no-reset-on-init;
|
|
ti,no-idle;
|
|
timer@0 {
|
|
assigned-clocks = <&gpt1_fck>;
|
|
assigned-clock-parents = <&func_32k_ck>;
|
|
};
|
|
};
|