Ville Syrjälä 40478455fe drm/i915: Allow user modes to exceed DVI 165MHz limit
In commit
 commit 6375b768a9850b6154478993e5fb566fa4614a9c
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Mon Mar 3 11:33:36 2014 +0200

    drm/i915: Reject >165MHz modes w/ DVI monitors

the driver started to filter out display modes which exceed the
single-link DVI 165Mz dotclock limits when the monitor doesn't report
itself as being HDMI compliant. The intent was to filter out all
EDID derived modes that require dual-link DVI to operate since we
don't support dual-link.

However the patch went a bit too far and also causes the driver to reject
such modes even when specified by the user. Normally we don't check the
sink limitations when setting a mode from the user. This allows the user
to specify any mode whether the sink reports to support it or not. This
can be useful since often the sinks support more modes than they report
in the EDID.

So relax the checks a bit, and apply the single-link DVI dotclock limit
only when filtering the mode list, and ignore the limit when setting
a user specified mode.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=72961
Tested-by: Nicholas Vinson <nvinson@comcast.net>
Cc: stable@vger.kernel.org [3.14]
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-22 14:33:26 +03:00
..
2014-04-18 13:18:01 +10:00
2013-12-18 11:17:53 +10:00
2014-04-05 16:12:27 +10:00
2013-12-18 11:35:21 +10:00
2013-12-18 11:35:01 +10:00
2013-12-18 11:20:04 +10:00
2013-12-18 11:43:29 +10:00
2013-12-17 18:09:46 +01:00
2014-03-16 12:25:17 +01:00
2013-11-28 14:35:23 +10:00
2014-03-16 12:25:17 +01:00
2013-12-18 11:43:29 +10:00
2014-03-24 00:36:37 +09:00

************************************************************
* For the very latest on DRI development, please see:      *
*     http://dri.freedesktop.org/                          *
************************************************************

The Direct Rendering Manager (drm) is a device-independent kernel-level
device driver that provides support for the XFree86 Direct Rendering
Infrastructure (DRI).

The DRM supports the Direct Rendering Infrastructure (DRI) in four major
ways:

    1. The DRM provides synchronized access to the graphics hardware via
       the use of an optimized two-tiered lock.

    2. The DRM enforces the DRI security policy for access to the graphics
       hardware by only allowing authenticated X11 clients access to
       restricted regions of memory.

    3. The DRM provides a generic DMA engine, complete with multiple
       queues and the ability to detect the need for an OpenGL context
       switch.

    4. The DRM is extensible via the use of small device-specific modules
       that rely extensively on the API exported by the DRM module.


Documentation on the DRI is available from:
    http://dri.freedesktop.org/wiki/Documentation
    http://sourceforge.net/project/showfiles.php?group_id=387
    http://dri.sourceforge.net/doc/

For specific information about kernel-level support, see:

    The Direct Rendering Manager, Kernel Support for the Direct Rendering
    Infrastructure
    http://dri.sourceforge.net/doc/drm_low_level.html

    Hardware Locking for the Direct Rendering Infrastructure
    http://dri.sourceforge.net/doc/hardware_locking_low_level.html

    A Security Analysis of the Direct Rendering Infrastructure
    http://dri.sourceforge.net/doc/security_low_level.html