Martin Blumenstingl 406df18f1f ath9k: Fix NF CCA limits for AR9287 and AR9227 ... The FreeBSD driver [0] uses the same 2G values as for the AR9280 chips. Using the same values in ath9k results in much better throughput for me. Before this patch I had a huge amount of packet loss (sometimes up to 40%) and the max transfer speed was somewhere around 5Mbit/s. With this patch applied I have zero packet loss and ten times the throughput. My device uses a AR9227 which is the PCI variant of the AR9287. [0] http://bxr.su/FreeBSD/sys/dev/ath/ath_hal/ar9002/ar9287.h Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>		2015-10-14 14:05:00 +03:00
..
ar5523	mac80211: convert HW flags to unsigned long bitmap	2015-06-10 16:05:36 +02:00
ath5k	ath5k: use DECLARE_EWMA	2015-08-20 14:10:22 -07:00
ath6kl	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next	2015-09-03 08:08:17 -07:00
ath9k	ath9k: Fix NF CCA limits for AR9287 and AR9227	2015-10-14 14:05:00 +03:00
ath10k	Major changes:	2015-10-12 19:39:18 -07:00
carl9170	Major changes:	2015-10-12 19:39:18 -07:00
wcn36xx	mac80211: allow to transmit A-MSDU within A-MPDU	2015-09-22 15:21:23 +02:00
wil6210	drivers/net/wireless/ath/wil6210: use seq_hex_dump() to dump buffers	2015-09-10 13:29:01 -07:00
ath.h	ath9k: Add a new debug flag for FFT spectral scan	2015-05-09 16:46:08 +03:00
debug.c	ath: Make ath_opmode_to_string understand OCB mode	2015-08-10 22:21:15 +03:00
dfs_pattern_detector.c	ath: use PRI value given by spec for fixed PRI	2015-09-27 15:50:30 +03:00
dfs_pattern_detector.h	ath: use PRI value given by spec for fixed PRI	2015-09-27 15:50:30 +03:00
dfs_pri_detector.c	ath: use PRI value given by spec for fixed PRI	2015-09-27 15:50:30 +03:00
dfs_pri_detector.h
hw.c
Kconfig
key.c
main.c
Makefile
reg.h
regd_common.h
regd.c
regd.h
spectral_common.h
trace.c
trace.h