iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/gpu/drm/tiny/st7735r.c
Andy Shevchenko a3204e2e16 drm/st7735r: Avoid spamming logs if probe is deferred 
The GPIO request can fail and probe may be deferred. Thus,
the error message may be printed again and again. Avoid
this by replacing DRM_DEV_ERROR() by dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421163157.50949-1-andriy.shevchenko@linux.intel.com
2021-04-27 13:13:46 +02:00

281 lines
7.0 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* DRM driver for display panels connected to a Sitronix ST7715R or ST7735R
* display controller in SPI mode.
*
* Copyright 2017 David Lechner <david@lechnology.com>
* Copyright (C) 2019 Glider bvba
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/dma-buf.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
#include <video/mipi_display.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_managed.h>
#include <drm/drm_mipi_dbi.h>
#define ST7735R_FRMCTR1 0xb1
#define ST7735R_FRMCTR2 0xb2
#define ST7735R_FRMCTR3 0xb3
#define ST7735R_INVCTR 0xb4
#define ST7735R_PWCTR1 0xc0
#define ST7735R_PWCTR2 0xc1
#define ST7735R_PWCTR3 0xc2
#define ST7735R_PWCTR4 0xc3
#define ST7735R_PWCTR5 0xc4
#define ST7735R_VMCTR1 0xc5
#define ST7735R_GAMCTRP1 0xe0
#define ST7735R_GAMCTRN1 0xe1
#define ST7735R_MY BIT(7)
#define ST7735R_MX BIT(6)
#define ST7735R_MV BIT(5)
#define ST7735R_RGB BIT(3)
struct st7735r_cfg {
const struct drm_display_mode mode;
unsigned int left_offset;
unsigned int top_offset;
unsigned int write_only:1;
unsigned int rgb:1; /* RGB (vs. BGR) */
};
struct st7735r_priv {
struct mipi_dbi_dev dbidev; /* Must be first for .release() */
const struct st7735r_cfg *cfg;
};
static void st7735r_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv,
dbidev);
struct mipi_dbi *dbi = &dbidev->dbi;
int ret, idx;
u8 addr_mode;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_reset(dbidev);
if (ret)
goto out_exit;
msleep(150);
mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
msleep(500);
mipi_dbi_command(dbi, ST7735R_FRMCTR1, 0x01, 0x2c, 0x2d);
mipi_dbi_command(dbi, ST7735R_FRMCTR2, 0x01, 0x2c, 0x2d);
mipi_dbi_command(dbi, ST7735R_FRMCTR3, 0x01, 0x2c, 0x2d, 0x01, 0x2c,
0x2d);
mipi_dbi_command(dbi, ST7735R_INVCTR, 0x07);
mipi_dbi_command(dbi, ST7735R_PWCTR1, 0xa2, 0x02, 0x84);
mipi_dbi_command(dbi, ST7735R_PWCTR2, 0xc5);
mipi_dbi_command(dbi, ST7735R_PWCTR3, 0x0a, 0x00);
mipi_dbi_command(dbi, ST7735R_PWCTR4, 0x8a, 0x2a);
mipi_dbi_command(dbi, ST7735R_PWCTR5, 0x8a, 0xee);
mipi_dbi_command(dbi, ST7735R_VMCTR1, 0x0e);
mipi_dbi_command(dbi, MIPI_DCS_EXIT_INVERT_MODE);
switch (dbidev->rotation) {
default:
addr_mode = ST7735R_MX | ST7735R_MY;
break;
case 90:
addr_mode = ST7735R_MX | ST7735R_MV;
break;
case 180:
addr_mode = 0;
break;
case 270:
addr_mode = ST7735R_MY | ST7735R_MV;
break;
}
if (priv->cfg->rgb)
addr_mode |= ST7735R_RGB;
mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT,
MIPI_DCS_PIXEL_FMT_16BIT);
mipi_dbi_command(dbi, ST7735R_GAMCTRP1, 0x02, 0x1c, 0x07, 0x12, 0x37,
0x32, 0x29, 0x2d, 0x29, 0x25, 0x2b, 0x39, 0x00, 0x01,
0x03, 0x10);
mipi_dbi_command(dbi, ST7735R_GAMCTRN1, 0x03, 0x1d, 0x07, 0x06, 0x2e,
0x2c, 0x29, 0x2d, 0x2e, 0x2e, 0x37, 0x3f, 0x00, 0x00,
0x02, 0x10);
mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
msleep(100);
mipi_dbi_command(dbi, MIPI_DCS_ENTER_NORMAL_MODE);
msleep(20);
mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = {
.enable = st7735r_pipe_enable,
.disable = mipi_dbi_pipe_disable,
.update = mipi_dbi_pipe_update,
.prepare_fb = drm_gem_simple_display_pipe_prepare_fb,
};
static const struct st7735r_cfg jd_t18003_t01_cfg = {
.mode = { DRM_SIMPLE_MODE(128, 160, 28, 35) },
/* Cannot read from Adafruit 1.8" display via SPI */
.write_only = true,
};
static const struct st7735r_cfg rh128128t_cfg = {
.mode = { DRM_SIMPLE_MODE(128, 128, 25, 26) },
.left_offset = 2,
.top_offset = 3,
.rgb = true,
};
DEFINE_DRM_GEM_CMA_FOPS(st7735r_fops);
static const struct drm_driver st7735r_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
.fops = &st7735r_fops,
DRM_GEM_CMA_DRIVER_OPS_VMAP,
.debugfs_init = mipi_dbi_debugfs_init,
.name = "st7735r",
.desc = "Sitronix ST7735R",
.date = "20171128",
.major = 1,
.minor = 0,
};
static const struct of_device_id st7735r_of_match[] = {
{ .compatible = "jianda,jd-t18003-t01", .data = &jd_t18003_t01_cfg },
{ .compatible = "okaya,rh128128t", .data = &rh128128t_cfg },
{ },
};
MODULE_DEVICE_TABLE(of, st7735r_of_match);
static const struct spi_device_id st7735r_id[] = {
{ "jd-t18003-t01", (uintptr_t)&jd_t18003_t01_cfg },
{ },
};
MODULE_DEVICE_TABLE(spi, st7735r_id);
static int st7735r_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
const struct st7735r_cfg *cfg;
struct mipi_dbi_dev *dbidev;
struct st7735r_priv *priv;
struct drm_device *drm;
struct mipi_dbi *dbi;
struct gpio_desc *dc;
u32 rotation = 0;
int ret;
cfg = device_get_match_data(&spi->dev);
if (!cfg)
cfg = (void *)spi_get_device_id(spi)->driver_data;
priv = devm_drm_dev_alloc(dev, &st7735r_driver,
struct st7735r_priv, dbidev.drm);
if (IS_ERR(priv))
return PTR_ERR(priv);
dbidev = &priv->dbidev;
priv->cfg = cfg;
dbi = &dbidev->dbi;
drm = &dbidev->drm;
dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(dbi->reset))
return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
if (IS_ERR(dc))
return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
dbidev->backlight = devm_of_find_backlight(dev);
if (IS_ERR(dbidev->backlight))
return PTR_ERR(dbidev->backlight);
device_property_read_u32(dev, "rotation", &rotation);
ret = mipi_dbi_spi_init(spi, dbi, dc);
if (ret)
return ret;
if (cfg->write_only)
dbi->read_commands = NULL;
dbidev->left_offset = cfg->left_offset;
dbidev->top_offset = cfg->top_offset;
ret = mipi_dbi_dev_init(dbidev, &st7735r_pipe_funcs, &cfg->mode,
rotation);
if (ret)
return ret;
drm_mode_config_reset(drm);
ret = drm_dev_register(drm, 0);
if (ret)
return ret;
spi_set_drvdata(spi, drm);
drm_fbdev_generic_setup(drm, 0);
return 0;
}
static int st7735r_remove(struct spi_device *spi)
{
struct drm_device *drm = spi_get_drvdata(spi);
drm_dev_unplug(drm);
drm_atomic_helper_shutdown(drm);
return 0;
}
static void st7735r_shutdown(struct spi_device *spi)
{
drm_atomic_helper_shutdown(spi_get_drvdata(spi));
}
static struct spi_driver st7735r_spi_driver = {
.driver = {
.name = "st7735r",
.of_match_table = st7735r_of_match,
},
.id_table = st7735r_id,
.probe = st7735r_probe,
.remove = st7735r_remove,
.shutdown = st7735r_shutdown,
};
module_spi_driver(st7735r_spi_driver);
MODULE_DESCRIPTION("Sitronix ST7735R DRM driver");
MODULE_AUTHOR("David Lechner <david@lechnology.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink