0fea1007f0
Adding support for max11205 16-bit single-channel ultra-low power delta-sigma adc. The MAX11205 is compatible with the 2-wire interface and uses SCLK and RDY/DOUT for serial communications. In this mode, all controls are implemented by timing the high or low phase of the SCLK. The 2-wire serial interface only allows for data to be read out through the RDY/DOUT output. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220831133021.215625-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
184 lines
4.3 KiB
C
184 lines
4.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Maxim MAX11205 16-Bit Delta-Sigma ADC
|
|
*
|
|
* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf
|
|
* Copyright (C) 2022 Analog Devices, Inc.
|
|
* Author: Ramona Bolboaca <ramona.bolboaca@analog.com>
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/adc/ad_sigma_delta.h>
|
|
|
|
#define MAX11205_BIT_SCALE 15
|
|
#define MAX11205A_OUT_DATA_RATE 116
|
|
#define MAX11205B_OUT_DATA_RATE 13
|
|
|
|
enum max11205_chip_type {
|
|
TYPE_MAX11205A,
|
|
TYPE_MAX11205B,
|
|
};
|
|
|
|
struct max11205_chip_info {
|
|
unsigned int out_data_rate;
|
|
const char *name;
|
|
};
|
|
|
|
struct max11205_state {
|
|
const struct max11205_chip_info *chip_info;
|
|
struct regulator *vref;
|
|
struct ad_sigma_delta sd;
|
|
};
|
|
|
|
static const struct ad_sigma_delta_info max11205_sigma_delta_info = {
|
|
.has_registers = false,
|
|
};
|
|
|
|
static int max11205_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct max11205_state *st = iio_priv(indio_dev);
|
|
int reg_mv;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
return ad_sigma_delta_single_conversion(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
reg_mv = regulator_get_voltage(st->vref);
|
|
if (reg_mv < 0)
|
|
return reg_mv;
|
|
reg_mv /= 1000;
|
|
*val = reg_mv;
|
|
*val2 = MAX11205_BIT_SCALE;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = st->chip_info->out_data_rate;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info max11205_iio_info = {
|
|
.read_raw = max11205_read_raw,
|
|
.validate_trigger = ad_sd_validate_trigger,
|
|
};
|
|
|
|
static const struct iio_chan_spec max11205_channels[] = {
|
|
{
|
|
.type = IIO_VOLTAGE,
|
|
.indexed = 1,
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_BE,
|
|
},
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
},
|
|
};
|
|
|
|
static const struct max11205_chip_info max11205_chip_info[] = {
|
|
[TYPE_MAX11205A] = {
|
|
.out_data_rate = MAX11205A_OUT_DATA_RATE,
|
|
.name = "max11205a",
|
|
},
|
|
[TYPE_MAX11205B] = {
|
|
.out_data_rate = MAX11205B_OUT_DATA_RATE,
|
|
.name = "max11205b",
|
|
},
|
|
};
|
|
|
|
static void max11205_reg_disable(void *reg)
|
|
{
|
|
regulator_disable(reg);
|
|
}
|
|
|
|
static int max11205_probe(struct spi_device *spi)
|
|
{
|
|
struct max11205_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info);
|
|
|
|
st->chip_info = device_get_match_data(&spi->dev);
|
|
if (!st->chip_info)
|
|
st->chip_info =
|
|
(const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data;
|
|
|
|
indio_dev->name = st->chip_info->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = max11205_channels;
|
|
indio_dev->num_channels = 1;
|
|
indio_dev->info = &max11205_iio_info;
|
|
|
|
st->vref = devm_regulator_get(&spi->dev, "vref");
|
|
if (IS_ERR(st->vref))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(st->vref),
|
|
"Failed to get vref regulator\n");
|
|
|
|
ret = regulator_enable(st->vref);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static const struct spi_device_id max11205_spi_ids[] = {
|
|
{ "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] },
|
|
{ "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, max11205_spi_ids);
|
|
|
|
static const struct of_device_id max11205_dt_ids[] = {
|
|
{
|
|
.compatible = "maxim,max11205a",
|
|
.data = &max11205_chip_info[TYPE_MAX11205A],
|
|
},
|
|
{
|
|
.compatible = "maxim,max11205b",
|
|
.data = &max11205_chip_info[TYPE_MAX11205B],
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max11205_dt_ids);
|
|
|
|
static struct spi_driver max11205_spi_driver = {
|
|
.driver = {
|
|
.name = "max11205",
|
|
.of_match_table = max11205_dt_ids,
|
|
},
|
|
.probe = max11205_probe,
|
|
.id_table = max11205_spi_ids,
|
|
};
|
|
module_spi_driver(max11205_spi_driver);
|
|
|
|
MODULE_AUTHOR("Ramona Bolboaca <ramona.bolboaca@analog.com>");
|
|
MODULE_DESCRIPTION("MAX11205 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
|