Linus Torvalds 752451f01c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux ...

Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...

2012-12-18 16:51:10 -08:00

..

testcases

of: Add of_property_match_string() to find index into a string list

2012-01-28 10:29:20 -07:00

aks-cdu.dts

ARM: at91: Add support for board aks-cdu

2012-07-09 20:45:31 +02:00

am33xx.dtsi

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2012-12-12 18:07:07 -08:00

am335x-bone.dts

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2012-12-12 18:07:07 -08:00

am335x-evm.dts

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2012-12-12 18:07:07 -08:00

am335x-evmsk.dts

ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk

2012-11-06 15:45:53 +01:00

am3517_mt_ventoux.dts

arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board

2012-03-05 13:48:03 -08:00

am3517-evm.dts

arm/dts: Add support for TI AM3517/05 EVM board

2012-07-02 01:27:44 -07:00

animeo_ip.dts

ARM: at91: Animeo IP: add mmc support

2012-11-20 01:10:28 +08:00

armada-370-db.dts

Marvell boards changes related to Ethernet, for 3.8

2012-11-20 23:35:16 +01:00

armada-370-mirabox.dts

arm: mvebu: remove 'clock-frequency' properties from Armada 370/XP Ethernet nodes

2012-11-20 23:15:56 +01:00

armada-370-xp.dtsi

Merge branch 'mvebu-misc-fixes' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

2012-11-24 04:08:49 +00:00

armada-370.dtsi

arm: mvebu: add Aurora L2 Cache Controller to the DT

2012-11-27 15:35:34 +00:00

armada-xp-db.dts

Marvell Ethernet DT update for clk support

2012-11-20 23:38:00 +01:00

armada-xp-mv78230.dtsi

clk: armada-370-xp: add support for clock framework

2012-11-20 14:46:48 +01:00

armada-xp-mv78260.dtsi

clk: armada-370-xp: add support for clock framework

2012-11-20 14:46:48 +01:00

armada-xp-mv78460.dtsi

clk: armada-370-xp: add support for clock framework

2012-11-20 14:46:48 +01:00

armada-xp-openblocks-ax3-4.dts

ARM: mvebu: Add SATA support for OpenBlocks AX3-4

2012-11-21 23:20:35 +01:00

armada-xp.dtsi

arm: mvebu: add Aurora L2 Cache Controller to the DT

2012-11-27 15:35:34 +00:00

at91rm9200.dtsi

ARM: AT91: Add AT91RM9200 device tree

2012-11-19 07:51:10 +08:00

at91rm9200ek.dts

ARM: AT91: Add AT91RM9200EK board device tree

2012-11-19 07:51:10 +08:00

at91sam9g15.dtsi

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g15ek.dts

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g20.dtsi

ARM: dts: add twi nodes for atmel SoCs

2012-09-12 14:49:16 +02:00

at91sam9g20ek_2mmc.dts

ARM: at91: dt: add mmc pinctrl for Atmel reference boards

2012-11-20 01:10:27 +08:00

at91sam9g20ek_common.dtsi

Sound updates for 3.8-rc1

2012-12-13 11:51:23 -08:00

at91sam9g20ek.dts

ARM: at91: add at91sam9g20ek boards dt support

2012-04-20 23:17:05 +08:00

at91sam9g25.dtsi

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g25ek.dts

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g35.dtsi

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g35ek.dts

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9g45.dtsi

Sound updates for 3.8-rc1

2012-12-13 11:51:23 -08:00

at91sam9m10g45ek.dts

ARM: at91: dt: add mmc pinctrl for Atmel reference boards

2012-11-20 01:10:27 +08:00

at91sam9n12.dtsi

ARM: at91: dt: at91sam9: add mmc pinctrl support

2012-11-20 01:10:27 +08:00

at91sam9n12ek.dts

ARM: at91: dt: add mmc pinctrl for Atmel reference boards

2012-11-20 01:10:27 +08:00

at91sam9x5.dtsi

Sound updates for 3.8-rc1

2012-12-13 11:51:23 -08:00

at91sam9x5cm.dtsi

ARM: at91: dt: remove unit-address part for memory nodes

2012-04-04 18:35:52 +02:00

at91sam9x5ek.dtsi

ARM: at91: dt: add mmc pinctrl for Atmel reference boards

2012-11-20 01:10:27 +08:00

at91sam9x25.dtsi

ARM: at91sam9: add macb pinctrl support

2012-11-19 06:54:25 +08:00

at91sam9x25ek.dts

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9x35.dtsi

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9x35ek.dts

arm: at91: dt: at91sam9 add serial pinctrl support

2012-10-13 09:21:44 +08:00

at91sam9260.dtsi

Sound updates for 3.8-rc1

2012-12-13 11:51:23 -08:00

at91sam9263.dtsi

Sound updates for 3.8-rc1

2012-12-13 11:51:23 -08:00

at91sam9263ek.dts

ARM: at91: dt: add mmc pinctrl for Atmel reference boards

2012-11-20 01:10:27 +08:00

bcm2835-rpi-b.dts

ARM: bcm2835: enable GPIO/pinctrl

2012-10-25 20:42:51 -06:00

bcm2835.dtsi

ARM: bcm2835: enable GPIO/pinctrl

2012-10-25 20:42:51 -06:00

bcm11351-brt.dts

Add support for generic BCM SoC chipsets

2012-11-19 22:39:07 -08:00

bcm11351.dtsi

Add support for generic BCM SoC chipsets

2012-11-19 22:39:07 -08:00

ccu9540.dts

ARM: ux500: List DT compatibility using platform names rather than by board

2012-11-01 13:02:25 +01:00

cros5250-common.dtsi

ARM: dts: Add board dts file for Snow board (ARM Chromebook)

2012-11-21 13:32:21 +09:00

da850-enbw-cmc.dts

ARM: davinci: add support for am1808 based EnBW CMC board

2012-10-29 15:43:43 +05:30

da850-evm.dts

ARM: davinci: da850 evm: add DT data

2012-10-29 15:43:13 +05:30

da850.dtsi

ARM: davinci: da850: add SoC DT data

2012-10-29 15:42:21 +05:30

dbx5x0.dtsi

Highlights:

2012-12-13 19:26:04 -08:00

dove-cm-a510.dts

ARM: dove: add device tree descriptors

2012-09-21 17:07:24 +00:00

dove-cubox.dts

ARM: Dove: Add CuBox pinhog for led

2012-11-24 02:57:27 +00:00

dove-dove-db.dts

ARM: dove: add device tree descriptors

2012-09-21 17:07:24 +00:00

dove.dtsi

ARM: arm-soc: Updates for Marvell mvebu/kirkwood

2012-12-14 14:54:26 -08:00

ea3250.dts

ARM: LPC32xx: Extend dts for EA3250 board

2012-09-06 11:40:48 +02:00

ecx-2000.dts

ARM: dts: Add Calxeda ECX-2000 support

2012-10-31 13:46:17 -05:00

ecx-common.dtsi

ARM: dts: Add Calxeda ECX-2000 support

2012-10-31 13:46:17 -05:00

elpida_ecb240abacn.dtsi

ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards

2012-09-07 19:18:40 +02:00

emev2-kzm9d.dts

mach-shmobile: Use DT_MACHINE for KZM9D V3

2012-05-18 00:14:03 +02:00

emev2.dtsi

mach-shmobile: Emma Mobile EV2 DT support V3

2012-05-18 00:14:03 +02:00

ethernut5.dts

Ethernut 5 board support

2012-04-27 23:23:22 +08:00

evk-pro3.dts

ARM: at91/dts: evk-pro3: enable watchdog

2012-11-16 15:48:48 +01:00

exynos4.dtsi

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

exynos4x12-pinctrl.dtsi

ARM: dts: Use drive strength 3 for SD pins for exynos4

2012-11-22 00:39:01 +09:00

exynos4x12.dtsi

ARM: dts: Add nodes for pin controllers for exynos4x12

2012-11-19 10:03:07 +09:00

exynos4210-origen.dts

ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen

2012-11-22 00:38:56 +09:00

exynos4210-pinctrl.dtsi

ARM: dts: Use drive strength 3 for SD pins for exynos4

2012-11-22 00:39:01 +09:00

exynos4210-smdkv310.dts

ARM: dts: Enable serial controllers on Origen and SMDKV310

2012-10-17 18:13:40 +09:00

exynos4210-trats.dts

ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats

2012-11-20 20:17:20 +09:00

exynos4210.dtsi

ARM: dts: Set up power domains for exynos4

2012-11-22 00:39:00 +09:00

exynos4212.dtsi

ARM: dts: Add support for EXYNOS4X12 SoCs

2012-11-07 08:52:25 +09:00

exynos4412-smdk4412.dts

ARM: dts: add board dts file for EXYNOS4412 based SMDK board

2012-11-07 09:12:10 +09:00

exynos4412.dtsi

ARM: dts: Add support for EXYNOS4X12 SoCs

2012-11-07 08:52:25 +09:00

exynos5250-smdk5250.dts

Merge branch 'next/dt-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

2012-11-26 00:06:23 -08:00

exynos5250-snow.dts

ARM: dts: Add board dts file for Snow board (ARM Chromebook)

2012-11-21 13:32:21 +09:00

exynos5250.dtsi

ARM: arm-soc: SoC updates, take 2

2012-12-14 14:38:28 -08:00

exynos5440-ssdk5440.dts

ARM: dts: add initial dts file for EXYNOS5440, SSDK5440

2012-11-22 13:42:49 +09:00

exynos5440.dtsi

ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC

2012-11-22 13:50:14 +09:00

ge863-pro3.dtsi

ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3

2012-07-09 20:22:00 +02:00

highbank.dts

ARM: dts: Add Calxeda ECX-2000 support

2012-10-31 13:46:17 -05:00

href.dtsi

ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF

2012-11-01 12:59:32 +01:00

hrefprev60.dts

ARM: ux500: Move board specific GPIO info out to subordinate DTS files

2012-11-27 10:58:27 +00:00

hrefv60plus.dts

ARM: ux500: Add SDI (MMC) support to the HREF Device Tree

2012-11-20 16:10:43 +00:00

imx6q-arm2.dts

ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'

2012-10-16 10:07:04 -07:00

imx6q-sabreauto.dts

ARM: dts: imx6q-sabreauto: Add basic support

2012-11-16 14:18:52 +08:00

imx6q-sabrelite.dts

ARM: dts: imx6q-sabrelite: add usbotg pinctrl support

2012-09-19 11:25:42 +08:00

imx6q-sabresd.dts

ARM: dts: imx6q-sabresd: add volume up/down gpio keys

2012-11-16 14:18:53 +08:00

imx6q.dtsi

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

imx23-evk.dts

ARM: mxs: Let mmc0 pin detect be generic

2012-08-23 10:01:30 +08:00

imx23-olinuxino.dts

ARM: imx23-olinuxino: Add spi support

2012-11-20 21:46:14 +08:00

imx23-stmp378x_devb.dts

ARM: mxs: Rename 'hog-gpios'

2012-08-23 10:01:11 +08:00

imx23.dtsi

They are a few mxs dts updates coming a little bit late. I'm sending

2012-11-25 23:26:53 -08:00

imx25-karo-tx25.dts

ARM i.MX: Add Ka-Ro TX25 devicetree

2012-11-12 12:11:27 +01:00

imx25.dtsi

ARM i.MX25: Add devicetree

2012-11-12 12:11:23 +01:00

imx27-3ds.dts

ARM: dts: imx27-3ds: Remove local watchdog inclusion

2012-11-16 16:21:48 +01:00

imx27-apf27.dts

Add device tree file for the armadeus apf27

2012-11-16 09:12:00 +01:00

imx27-phytec-phycore.dts

Merge branch 'next/dt' into HEAD

2012-10-01 14:23:11 -07:00

imx27.dtsi

ARM i.MX dts: Consistently add labels to devicenodes

2012-11-16 14:18:53 +08:00

imx28-apf28.dts

ARM: mxs: Add support for the Armadeus Systems APF28 module

2012-10-19 16:45:20 +08:00

imx28-apf28dev.dts

ARM: mxs: apf28dev: Add I2C and SPI support

2012-11-12 10:07:43 +08:00

imx28-apx4devkit.dts

ARM: mxs: Rename 'hog-gpios'

2012-08-23 10:01:11 +08:00

imx28-cfa10036.dts

ARM: dts: mxs: add oled support for the cfa-10036

2012-11-22 09:03:40 +08:00

imx28-cfa10049.dts

Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

2012-12-18 16:51:10 -08:00

imx28-evk.dts

ARM: dts: imx28-evk: Use pinctrl for gpio-led

2012-10-15 10:51:48 +08:00

imx28-m28evk.dts

ARM: dts: m28evk: Fix MMC WP pin being inverted

2012-09-05 11:53:11 +08:00

imx28-sps1.dts

ARM: mxs: Add SchulerControl SPS1 DTS file

2012-11-20 22:09:05 +08:00

imx28-tx28.dts

ARM: mxs: Rename 'hog-gpios'

2012-08-23 10:01:11 +08:00

imx28.dtsi

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

imx31-bug.dts

arm/dts: Add support for i.MX31 bug 1.x board from buglabs.

2012-07-10 19:23:03 +02:00

imx31.dtsi

ARM i.MX31: Add devicetree support

2012-07-10 19:23:03 +02:00

imx51-babbage.dts

ARM i.MX51 babbage: Add display support

2012-11-16 16:34:18 +01:00

imx51.dtsi

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

imx53-ard.dts

ARM: dts: imx53-ard: add pinctrl settings

2012-09-11 16:26:51 +08:00

imx53-evk.dts

ARM: dts: imx53-evk: add pinctrl settings

2012-09-11 16:26:52 +08:00

imx53-qsb.dts

ARM: dts: imx53-qsb: Make DA9053 regulator functional

2012-11-16 14:18:52 +08:00

imx53-smd.dts

ARM: dts: imx53-smd: add pinctrl settings

2012-09-11 16:26:52 +08:00

imx53.dtsi

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

integrator.dtsi

ARM: 7519/1: integrator: convert platform devices to Device Tree

2012-09-17 23:20:23 +01:00

integratorap.dts

ARM: integrator: hook the AP into the SoC bus

2012-11-16 22:25:50 +01:00

integratorcp.dts

ARM: integrator: hook the CP into the SoC bus

2012-11-16 22:26:07 +01:00

kirkwood-98dx4122.dtsi

ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl

2012-11-24 02:58:43 +00:00

kirkwood-6281.dtsi

ARM: kirkwood: Convert mplcec4 board to pinctrl

2012-11-24 02:58:52 +00:00

kirkwood-6282.dtsi

ARM: kirkwood: Add support DT of second I2C bus

2012-11-24 02:58:56 +00:00

kirkwood-dns320.dts

ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi

2012-07-27 16:49:53 +02:00

kirkwood-dns325.dts

ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi

2012-07-27 16:49:53 +02:00

kirkwood-dnskw.dtsi

ARM: Kirkwood: Convert dnskw to pinctrl

2012-11-24 02:57:56 +00:00

kirkwood-dockstar.dts

ARM: Kirkwood: Convert dockstar to pinctrl.

2012-11-24 02:58:05 +00:00

kirkwood-dreamplug.dts

ARM: Kirkwood: Convert dreamplug to pinctrl.

2012-11-24 02:58:11 +00:00

kirkwood-goflexnet.dts

ARM: Kirkwood: Convert GoFlex Net to pinctrl.

2012-11-24 02:58:18 +00:00

kirkwood-ib62x0.dts

ARM: Kirkwood: Convert ib62x0 to pinctrl.

2012-11-24 02:58:25 +00:00

kirkwood-iconnect.dts

ARM: Kirkwood: Convert iConnect to pinctrl.

2012-11-24 02:57:47 +00:00

kirkwood-iomega_ix2_200.dts

ARM: Kirkwood: Convert IX2-200 to pinctrl.

2012-11-24 02:58:36 +00:00

kirkwood-is2.dts

ARM: kirkwood: DT board setup for Network Space v2 and parents

2012-11-21 20:58:35 +00:00

kirkwood-km_kirkwood.dts

ARM: Kirkwood: Convert km_kirkwood to pinctrl

2012-11-24 02:58:48 +00:00

kirkwood-lschlv2.dts

ARM: Kirkwood: Replace mrvl with marvell

2012-07-27 16:50:57 +02:00

kirkwood-lsxhl.dts

ARM: Kirkwood: Replace mrvl with marvell

2012-07-27 16:50:57 +02:00

kirkwood-lsxl.dtsi

ARM: Kirkwood: Convert lsxl boards to pinctrl.

2012-11-24 02:58:30 +00:00

kirkwood-mplcec4.dts

ARM: kirkwood: Convert mplcec4 board to pinctrl

2012-11-24 02:58:52 +00:00

kirkwood-ns2-common.dtsi

ARM: kirkwood: DT board setup for Network Space v2 and parents

2012-11-21 20:58:35 +00:00

kirkwood-ns2.dts

ARM: kirkwood: DT board setup for Network Space v2 and parents

2012-11-21 20:58:35 +00:00

kirkwood-ns2lite.dts

ARM: kirkwood: DT board setup for Network Space Lite v2

2012-11-21 20:58:43 +00:00

kirkwood-ns2max.dts

ARM: kirkwood: DT board setup for Network Space v2 and parents

2012-11-21 20:58:35 +00:00

kirkwood-ns2mini.dts

ARM: kirkwood: DT board setup for Network Space Mini v2

2012-11-21 20:58:49 +00:00

kirkwood-nsa310.dts

arm: kirkwood: add support for ZyXEL NSA310

2012-11-21 20:59:30 +00:00

kirkwood-openblocks_a6.dts

ARM: Kirkwood: Add support LED of OpenBlocks A6

2012-11-24 02:59:12 +00:00

kirkwood-topkick.dts

ARM: Kirkwood: new board USI Topkick

2012-11-21 20:59:22 +00:00

kirkwood-ts219-6281.dts

ARM: Kirkwood: Convert TS219 to pinctrl.

2012-11-24 02:57:43 +00:00

kirkwood-ts219-6282.dts

ARM: Kirkwood: Convert TS219 to pinctrl.

2012-11-24 02:57:43 +00:00

kirkwood-ts219.dtsi

ARM: Kirkwood: Replace mrvl with marvell

2012-07-27 16:50:57 +02:00

kirkwood.dtsi

ARM: arm-soc: Updates for Marvell mvebu/kirkwood

2012-12-14 14:54:26 -08:00

kizbox.dts

ARM: at91: add kizbox board dt support.

2012-04-20 23:17:33 +08:00

lpc32xx.dtsi

ARM: LPC32xx: Add the motor PWM to base dts file

2012-11-14 15:41:18 +01:00

Makefile

ARM: arm-soc: Updates for Marvell mvebu/kirkwood

2012-12-14 14:54:26 -08:00

mmp2-brownstone.dts

ARM: dts: update memory size on brownstone

2012-06-05 16:42:38 +08:00

mmp2.dtsi

ARM: mmp: enable tauros2 cache in mmp2 dt

2012-08-16 16:17:10 +08:00

msm8660-surf.dts

ARM: msm: Move 8660 to DT timer

2012-09-13 11:14:54 -07:00

msm8960-cdp.dts

ARM: msm: Add DT support for 8960

2012-09-13 11:16:47 -07:00

omap2.dtsi

ARM: dts: OMAP: Add timer nodes

2012-10-29 16:56:32 +01:00

omap3-beagle-xm.dts

ARM: dts: Add omap3-beagle.dts

2012-10-29 16:56:24 +01:00

omap3-beagle.dts

ARM: dts: Add omap3-beagle.dts

2012-10-29 16:56:24 +01:00

omap3-evm.dts

ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM

2012-09-07 19:22:44 +02:00

omap3-overo.dtsi

ARM: dts: omap3-overo: Add support for the blue LED

2012-09-10 15:44:45 +02:00

omap3-tobi.dts

ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board

2012-09-10 12:07:22 +02:00

omap3.dtsi

ARM: dts: OMAP: Add counter-32k nodes

2012-10-29 16:56:33 +01:00

omap4-panda-a4.dts

ARM: dts: omap4-panda: Add pinmux configuration for HDMI

2012-11-07 11:50:28 +01:00

omap4-panda-es.dts

ARM: dts: omap4-panda: Add pinmux configuration for HDMI

2012-11-07 11:50:28 +01:00

omap4-panda.dts

ARM: dts: omap4-panda: Add pinmux configuration for HDMI

2012-11-07 11:50:28 +01:00

omap4-sdp-es23plus.dts

ARM: dts: omap4-sdp: Add pinmux configuration for HDMI

2012-11-07 11:50:29 +01:00

omap4-sdp.dts

ARM: dts: omap4-sdp: Add pinmux configuration for HDMI

2012-11-07 11:50:29 +01:00

omap4-var-som.dts

ARM: dts: OMAP: Rename pandaES and var_som for consistency

2012-10-29 16:56:35 +01:00

omap4.dtsi

ARM: dts: OMAP4: Update timer addresses

2012-11-01 17:03:31 +01:00

omap5-evm.dts

ARM: dts: omap5-evm: LPDDR2 memory device details for EVM

2012-11-05 18:38:27 +01:00

omap5.dtsi

ARM: dts: omap5: EMIF device tree data for OMAP5 boards

2012-11-05 18:38:03 +01:00

omap36xx.dtsi

arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm

2012-09-10 10:34:51 -07:00

omap2420-h4.dts

ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2

2012-09-07 19:22:49 +02:00

omap2420.dtsi

ARM: dts: OMAP: Add counter-32k nodes

2012-10-29 16:56:33 +01:00

omap2430.dtsi

ARM: dts: OMAP: Add counter-32k nodes

2012-10-29 16:56:33 +01:00

orion5x-lacie-ethernet-disk-mini-v2.dts

arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree

2012-11-21 21:00:51 +00:00

orion5x.dtsi

arm: orion5x: basic Device Tree support

2012-11-21 21:00:45 +00:00

phy3250.dts

ARM: LPC32xx: LED fix in PHY3250 DTS file

2012-09-25 10:11:41 +02:00

picoxcell-pc3x2.dtsi

picoxcell: add the DTS for pc3x2 and pc3x3 devices

2011-09-26 16:12:06 +01:00

picoxcell-pc3x3.dtsi

picoxcell: add the DTS for pc3x2 and pc3x3 devices

2011-09-26 16:12:06 +01:00

picoxcell-pc7302-pc3x2.dts

picoxcell: add the DTS for the PC7302 board

2011-09-26 16:12:07 +01:00

picoxcell-pc7302-pc3x3.dts

picoxcell: add the DTS for the PC7302 board

2011-09-26 16:12:07 +01:00

pm9g45.dts

ARM: at91: pm9g45: add mmc support

2012-11-20 01:10:28 +08:00

prima2-evb.dts

pinctrl: sirf: add DT-binding pinmux mapping support

2012-09-05 14:48:10 +08:00

prima2.dtsi

pinctrl: sirf: add DT-binding pinmux mapping support

2012-09-05 14:48:10 +08:00

pxa2xx.dtsi

ARM: pxa: add .dtsi files

2012-08-16 16:15:25 +08:00

pxa3xx.dtsi

ARM: pxa: add .dtsi files

2012-08-16 16:15:25 +08:00

pxa27x.dtsi

ARM: pxa: add .dtsi files

2012-08-16 16:15:25 +08:00

pxa168-aspenite.dts

ARM: dts: append DTS file of pxa168

2012-03-07 09:32:40 +08:00

pxa168.dtsi

ARM: dts: refresh dts file for arch mmp

2012-05-05 16:39:29 +08:00

pxa910-dkb.dts

ARM: dts: Enable 88pm860x pmic

2012-10-02 11:43:17 +02:00

pxa910.dtsi

MFD bits for the 3.7 merge window.

2012-10-05 12:01:30 +09:00

r8a7740-armadillo800eva.dts

ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva

2012-05-14 23:23:42 +02:00

r8a7740.dtsi

ARM: mach-shmobile: r8a7740 generic board support via DT

2012-07-06 21:03:35 +02:00

samsung_k3pe0e000b.dtsi

ARM: dts: omap5-evm: LPDDR2 memory device details for EVM

2012-11-05 18:38:27 +01:00

sh73a0-kzm9g.dts

ARM: shmobile: fix smp build

2012-05-16 22:16:30 +02:00

sh7372-mackerel.dts

ARM: mach-shmobile: Use DT_MACHINE for mackerel

2012-10-30 15:25:53 +08:00

sh7372.dtsi

ARM: mach-shmobile: sh7372 generic board support via DT V2

2012-04-11 12:19:31 +02:00

skeleton.dtsi

arm/dt: Add skeleton dtsi file

2011-07-25 09:52:11 -06:00

snowball.dts

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

socfpga_cyclone5.dts

ARM: socfpga: initial support for Altera's SOCFPGA platform

2012-07-19 10:39:00 +02:00

socfpga.dtsi

ARM: socfpga: Enable SMP for socfpga

2012-10-26 14:59:39 +02:00

spear3xx.dtsi

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear13xx.dtsi

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear300-evb.dts

ARM: SPEAr: DT: add uart state to fix warning

2012-11-26 15:53:52 +05:30

spear300.dtsi

ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor

2012-11-26 16:55:32 +05:30

spear310-evb.dts

ARM: SPEAr: DT: add uart state to fix warning

2012-11-26 15:53:52 +05:30

spear310.dtsi

ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor

2012-11-26 16:55:32 +05:30

spear320-evb.dts

ARM: SPEAr: DT: add uart state to fix warning

2012-11-26 15:53:52 +05:30

spear320-hmi.dts

ARM: SPEAr320: DT: Add SPEAr 320 HMI board support

2012-11-26 16:55:33 +05:30

spear320.dtsi

ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor

2012-11-26 16:55:32 +05:30

spear600-evb.dts

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear600.dtsi

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear1310-evb.dts

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear1310.dtsi

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear1340-evb.dts

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

spear1340.dtsi

ARM: SPEAr: DT: Update device nodes

2012-11-26 16:55:28 +05:30

stuib.dtsi

ARM: ux500: Change the type of interrupt to something compatible

2012-11-01 13:02:26 +01:00

sun4i-cubieboard.dts

ARM: sunxi: Add sun4i and cubieboard support

2012-11-20 15:36:34 +01:00

sun4i.dtsi

ARM: sunxi: Add missing sun4i.dtsi file

2012-11-26 19:02:40 +01:00

sun5i-olinuxino.dts

ARM: sunxi: Restructure sunxi dts/dtsi files

2012-11-20 15:36:00 +01:00

sun5i.dtsi

ARM: sunxi: Restructure sunxi dts/dtsi files

2012-11-20 15:36:00 +01:00

sunxi.dtsi

ARM: sunxi: Add sunxi restart function via onchip watchdog

2012-11-21 09:25:25 +01:00

tegra20-harmony.dts

ARM: tegra: harmony: enable HDMI port

2012-11-16 09:14:26 -07:00

tegra20-medcom-wide.dts

ARM: tegra: Add Avionic Design Medcom-Wide support

2012-09-20 09:34:00 -06:00

tegra20-paz00.dts

ARM: tegra: update *.dts for regulator-compatible deprecation

2012-11-05 11:36:04 -07:00

tegra20-plutux.dts

ARM: tegra: plutux: Enable HDMI output

2012-11-16 09:17:08 -07:00

tegra20-seaboard.dts

ARM: arm-soc: device tree conversions and enablement

2012-12-13 10:39:26 -08:00

tegra20-tamonten.dtsi

ARM: tegra: tamonten: Add host1x support

2012-11-16 09:17:08 -07:00

tegra20-tec.dts

ARM: tegra: tec: Enable HDMI output

2012-11-16 09:17:09 -07:00

tegra20-trimslice.dts

ARM: tegra: trimslice: enable HDMI port

2012-11-16 09:14:40 -07:00

tegra20-ventana.dts

ARM: tegra: ventana: Add NCT1008 temperature sensor

2012-11-15 15:07:30 -07:00

tegra20-whistler.dts

ARM: tegra: whistler: enable HDMI port

2012-11-16 10:56:38 -07:00

tegra20.dtsi

ARM: tegra: add TWD to device tree

2012-11-16 12:22:16 -07:00

tegra30-cardhu-a02.dts

ARM: dt: t30 cardhu: set pinmux and power for wlan

2012-11-15 15:07:28 -07:00

tegra30-cardhu-a04.dts

ARM: dt: t30 cardhu: set pinmux and power for wlan

2012-11-15 15:07:28 -07:00

tegra30-cardhu.dtsi

ARM: tegra: dts: cardhu: enable SLINK4

2012-11-15 15:07:29 -07:00

tegra30.dtsi

ARM: arm-soc: multiplatform conversion patches

2012-12-13 10:57:16 -08:00

tny_a9g20.dts

arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support

2012-04-20 23:17:00 +08:00

tny_a9260_common.dtsi

arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support

2012-04-20 23:17:00 +08:00

tny_a9260.dts

arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support

2012-04-20 23:17:00 +08:00

tny_a9263.dts

ARM: at91: DT: add Calao TNY A9263 board support

2012-04-20 23:17:30 +08:00

tps65217.dtsi

arm/dts: regulator: Add tps65217 device tree data

2012-08-30 13:59:17 -07:00

tps65910.dtsi

arm/dts: regulator: Add tps65910 device tree data

2012-08-30 13:57:53 -07:00

twl4030.dtsi

ARM: dts: Add twl4030-usb data

2012-10-29 16:56:29 +01:00

twl6030.dtsi

ARM: dts: Add twl6030-usb data

2012-10-29 16:56:29 +01:00

u9540.dts

ARM: ux500: Enable all MMC devices on the u9540 when booting with DT

2012-11-20 16:10:46 +00:00

usb_a9g20-dab-mmx.dtsi

ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20

2012-03-15 23:29:54 +08:00

usb_a9g20.dts

ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common

2012-04-20 23:17:11 +08:00

usb_a9260_common.dtsi

ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common

2012-04-20 23:17:11 +08:00

usb_a9260.dts

ARM: at91: DT: add Calao USB A9260 DT support

2012-04-20 23:17:15 +08:00

usb_a9263.dts

ARM: at91: DT: add Calao USB A9263 board support

2012-04-20 23:17:27 +08:00

versatile-ab.dts

ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs

2012-04-23 15:46:15 +01:00

versatile-pb.dts

ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs

2012-04-23 15:46:15 +01:00

vexpress-v2m-rs1.dtsi

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vexpress-v2m.dtsi

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vexpress-v2p-ca5s.dts

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vexpress-v2p-ca9.dts

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vexpress-v2p-ca15_a7.dts

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vexpress-v2p-ca15-tc1.dts

ARM: vexpress: Remove motherboard dependencies in the DTS files

2012-11-05 17:09:52 +00:00

vt8500-bv07.dts

arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

2012-09-21 19:23:54 +12:00

vt8500.dtsi

arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

2012-09-21 19:23:54 +12:00

wm8505-ref.dts

arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

2012-09-21 19:23:54 +12:00

wm8505.dtsi

dtb: fix interrupt assignment for ehci/uhci on wm8505

2012-10-15 21:12:52 -07:00

wm8650-mid.dts

arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

2012-09-21 19:23:54 +12:00

wm8650.dtsi

arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

2012-09-21 19:23:54 +12:00

xenvm-4.2.dts

arm: introduce a DTS for Xen unprivileged virtual machines

2012-09-24 16:40:52 +00:00

zynq-7000.dtsi

ARM: zynq: add clk binding support to the ttc

2012-11-14 16:10:42 +01:00

zynq-zc702.dts

ARM: zynq: add clk binding support to the ttc

2012-11-14 16:10:42 +01:00