477632dff5
This reverts commit 7dd09a1af2c7150269350aaa567a11b06e831003. Many xHCI host controllers can only handle 32-bit addresses, and writing 64-bits at a time causes them to fail. Rafał reports that USB devices simply do not enumerate, and reverting this patch helps. Branimir reports that his host controller doesn't respond to an Enable Slot command and dies: [ 75.576160] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 88.991634] xhci_hcd 0000:03:00.0: Stopped the command ring failed, maybe the host is dead [ 88.991748] xhci_hcd 0000:03:00.0: Abort command ring failed [ 88.991845] xhci_hcd 0000:03:00.0: HC died; cleaning up [ 93.985489] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 93.985494] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 98.982586] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 98.982591] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead. [ 103.979696] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 103.979702] xhci_hcd 0000:03:00.0: Abort the command ring, but the xHCI is dead Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Reported-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Branimir Maksimovic <branimir.maksimovic@gmail.com> Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
To understand all the Linux-USB framework, you'll use these resources: * This source code. This is necessarily an evolving work, and includes kerneldoc that should help you get a current overview. ("make pdfdocs", and then look at "usb.pdf" for host side and "gadget.pdf" for peripheral side.) Also, Documentation/usb has more information. * The USB 2.0 specification (from www.usb.org), with supplements such as those for USB OTG and the various device classes. The USB specification has a good overview chapter, and USB peripherals conform to the widely known "Chapter 9". * Chip specifications for USB controllers. Examples include host controllers (on PCs, servers, and more); peripheral controllers (in devices with Linux firmware, like printers or cell phones); and hard-wired peripherals like Ethernet adapters. * Specifications for other protocols implemented by USB peripheral functions. Some are vendor-specific; others are vendor-neutral but just standardized outside of the www.usb.org team. Here is a list of what each subdirectory here is, and what is contained in them. core/ - This is for the core USB host code, including the usbfs files and the hub class driver ("khubd"). host/ - This is for USB host controller drivers. This includes UHCI, OHCI, EHCI, and others that might be used with more specialized "embedded" systems. gadget/ - This is for USB peripheral controller drivers and the various gadget drivers which talk to them. Individual USB driver directories. A new driver should be added to the first subdirectory in the list below that it fits into. image/ - This is for still image drivers, like scanners or digital cameras. ../input/ - This is for any driver that uses the input subsystem, like keyboard, mice, touchscreens, tablets, etc. ../media/ - This is for multimedia drivers, like video cameras, radios, and any other drivers that talk to the v4l subsystem. ../net/ - This is for network drivers. serial/ - This is for USB to serial drivers. storage/ - This is for USB mass-storage drivers. class/ - This is for all USB device drivers that do not fit into any of the above categories, and work for a range of USB Class specified devices. misc/ - This is for all USB device drivers that do not fit into any of the above categories.