32ada6b098
Properties with standard unit suffixes already have a type and don't need type definitions. They also default to a single entry, so 'maxItems: 1' can be dropped. adi,ad5758 is an oddball which defined an enum of arrays. While a valid schema, it is simpler as a whole to only define scalar constraints. Cc: Jean Delvare <jdelvare@suse.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-input@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
127 lines
3.7 KiB
YAML
127 lines
3.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
|
|
|
|
maintainers:
|
|
- patches@opensource.cirrus.com
|
|
|
|
description: |
|
|
These devices are audio SoCs with extensive digital capabilities and a
|
|
range of analogue I/O.
|
|
|
|
This document lists Extcon specific bindings, see the primary binding
|
|
document ../mfd/arizona.yaml
|
|
|
|
properties:
|
|
wlf,hpdet-channel:
|
|
description:
|
|
Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the
|
|
headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
|
|
to HPDETR. If this node is not included or if the value is unknown,
|
|
then headphone detection mode is set to HPDETL.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
minimum: 1
|
|
maximum: 2
|
|
|
|
wlf,use-jd2:
|
|
description:
|
|
Use the additional JD input along with JD1 for dual pin jack detection.
|
|
type: boolean
|
|
|
|
wlf,use-jd2-nopull:
|
|
description:
|
|
Internal pull on JD2 is disabled when used for jack detection.
|
|
type: boolean
|
|
|
|
wlf,jd-invert:
|
|
description:
|
|
Invert the polarity of the jack detection switch.
|
|
type: boolean
|
|
|
|
wlf,micd-software-compare:
|
|
description:
|
|
Use a software comparison to determine mic presence.
|
|
type: boolean
|
|
|
|
wlf,micd-detect-debounce:
|
|
description:
|
|
Additional software microphone detection debounce specified in
|
|
milliseconds.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
|
|
wlf,micd-pol-gpio:
|
|
description:
|
|
GPIO specifier for the GPIO controlling the headset polarity if one
|
|
exists.
|
|
maxItems: 1
|
|
|
|
wlf,micd-bias-start-time:
|
|
description:
|
|
Time allowed for MICBIAS to startup prior to performing microphone
|
|
detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
minimum: 0
|
|
maximum: 12
|
|
|
|
wlf,micd-rate:
|
|
description:
|
|
Delay between successive microphone detection measurements, specified
|
|
as per the ARIZONA_MICD_TIME_XXX defines.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
minimum: 0
|
|
maximum: 12
|
|
|
|
wlf,micd-dbtime:
|
|
description:
|
|
Microphone detection hardware debounces specified as the number of
|
|
measurements to take.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
enum: [2, 4]
|
|
|
|
wlf,micd-timeout-ms:
|
|
description:
|
|
Timeout for microphone detection, specified in milliseconds.
|
|
|
|
wlf,micd-force-micbias:
|
|
description:
|
|
Force MICBIAS continuously on during microphone detection.
|
|
type: boolean
|
|
|
|
wlf,micd-configs:
|
|
description:
|
|
Headset polarity configurations (generally used for detection of
|
|
CTIA / OMTP headsets), the field can be of variable length but
|
|
should always be a multiple of 3 cells long, each three cell group
|
|
represents one polarity configuration.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32-matrix"
|
|
items:
|
|
items:
|
|
- description:
|
|
The first cell defines the accessory detection pin, zero
|
|
will use MICDET1 and 0x2000 will use MICDET2.
|
|
enum: [ 0, 0x2000 ]
|
|
- description:
|
|
The second cell represents the MICBIAS to be used. Zero
|
|
will use MICVDD, 1-3 will use MICBIASx.
|
|
minimum: 0
|
|
maximum: 3
|
|
- description:
|
|
The third cell represents the value of the micd-pol-gpio
|
|
pin.
|
|
minimum: 0
|
|
maximum: 1
|
|
|
|
wlf,gpsw:
|
|
description:
|
|
Settings for the general purpose switch, set as one of the
|
|
ARIZONA_GPSW_XXX defines.
|
|
$ref: "/schemas/types.yaml#/definitions/uint32"
|
|
minimum: 0
|
|
maximum: 3
|
|
|
|
additionalProperties: true
|