952a11ca32
We have bool so use it consistently in all the drivers. The following Coccinelle script was used: @@ identifier T; type t = { char, int }; @@ struct T { ... - t valid; + bool valid; ... } @@ identifier v; @@ ( - v->valid = 0 + v->valid = false | - v->valid = 1 + v->valid = true ) followed by sed to fixup the comments: sed '/bool valid;/{s/!=0/true/;s/zero/false/}' Few whitespace changes were fixed manually. All modified drivers were compile-tested. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924195202.27917-1-fercerpav@gmail.com [groeck: Fixed up 'u8 valid' to 'boool valid' in atxp1.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
916 lines
25 KiB
C
916 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* sis5595.c - Part of lm_sensors, Linux kernel modules
|
|
* for hardware monitoring
|
|
*
|
|
* Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
|
|
* Kyösti Mälkki <kmalkki@cc.hut.fi>, and
|
|
* Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
* Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
|
|
* the help of Jean Delvare <jdelvare@suse.de>
|
|
*/
|
|
|
|
/*
|
|
* SiS southbridge has a LM78-like chip integrated on the same IC.
|
|
* This driver is a customized copy of lm78.c
|
|
*
|
|
* Supports following revisions:
|
|
* Version PCI ID PCI Revision
|
|
* 1 1039/0008 AF or less
|
|
* 2 1039/0008 B0 or greater
|
|
*
|
|
* Note: these chips contain a 0008 device which is incompatible with the
|
|
* 5595. We recognize these by the presence of the listed
|
|
* "blacklist" PCI ID and refuse to load.
|
|
*
|
|
* NOT SUPPORTED PCI ID BLACKLIST PCI ID
|
|
* 540 0008 0540
|
|
* 550 0008 0550
|
|
* 5513 0008 5511
|
|
* 5581 0008 5597
|
|
* 5582 0008 5597
|
|
* 5597 0008 5597
|
|
* 5598 0008 5597/5598
|
|
* 630 0008 0630
|
|
* 645 0008 0645
|
|
* 730 0008 0730
|
|
* 735 0008 0735
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/io.h>
|
|
|
|
/*
|
|
* If force_addr is set to anything different from 0, we forcibly enable
|
|
* the device at the given address.
|
|
*/
|
|
static u16 force_addr;
|
|
module_param(force_addr, ushort, 0);
|
|
MODULE_PARM_DESC(force_addr,
|
|
"Initialize the base address of the sensors");
|
|
|
|
static struct platform_device *pdev;
|
|
|
|
/* Many SIS5595 constants specified below */
|
|
|
|
/* Length of ISA address segment */
|
|
#define SIS5595_EXTENT 8
|
|
/* PCI Config Registers */
|
|
#define SIS5595_BASE_REG 0x68
|
|
#define SIS5595_PIN_REG 0x7A
|
|
#define SIS5595_ENABLE_REG 0x7B
|
|
|
|
/* Where are the ISA address/data registers relative to the base address */
|
|
#define SIS5595_ADDR_REG_OFFSET 5
|
|
#define SIS5595_DATA_REG_OFFSET 6
|
|
|
|
/* The SIS5595 registers */
|
|
#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
|
|
#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
|
|
#define SIS5595_REG_IN(nr) (0x20 + (nr))
|
|
|
|
#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
|
|
#define SIS5595_REG_FAN(nr) (0x28 + (nr))
|
|
|
|
/*
|
|
* On the first version of the chip, the temp registers are separate.
|
|
* On the second version,
|
|
* TEMP pin is shared with IN4, configured in PCI register 0x7A.
|
|
* The registers are the same as well.
|
|
* OVER and HYST are really MAX and MIN.
|
|
*/
|
|
|
|
#define REV2MIN 0xb0
|
|
#define SIS5595_REG_TEMP (((data->revision) >= REV2MIN) ? \
|
|
SIS5595_REG_IN(4) : 0x27)
|
|
#define SIS5595_REG_TEMP_OVER (((data->revision) >= REV2MIN) ? \
|
|
SIS5595_REG_IN_MAX(4) : 0x39)
|
|
#define SIS5595_REG_TEMP_HYST (((data->revision) >= REV2MIN) ? \
|
|
SIS5595_REG_IN_MIN(4) : 0x3a)
|
|
|
|
#define SIS5595_REG_CONFIG 0x40
|
|
#define SIS5595_REG_ALARM1 0x41
|
|
#define SIS5595_REG_ALARM2 0x42
|
|
#define SIS5595_REG_FANDIV 0x47
|
|
|
|
/*
|
|
* Conversions. Limit checking is only done on the TO_REG
|
|
* variants.
|
|
*/
|
|
|
|
/*
|
|
* IN: mV, (0V to 4.08V)
|
|
* REG: 16mV/bit
|
|
*/
|
|
static inline u8 IN_TO_REG(unsigned long val)
|
|
{
|
|
unsigned long nval = clamp_val(val, 0, 4080);
|
|
return (nval + 8) / 16;
|
|
}
|
|
#define IN_FROM_REG(val) ((val) * 16)
|
|
|
|
static inline u8 FAN_TO_REG(long rpm, int div)
|
|
{
|
|
if (rpm <= 0)
|
|
return 255;
|
|
if (rpm > 1350000)
|
|
return 1;
|
|
return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
|
|
}
|
|
|
|
static inline int FAN_FROM_REG(u8 val, int div)
|
|
{
|
|
return val == 0 ? -1 : val == 255 ? 0 : 1350000 / (val * div);
|
|
}
|
|
|
|
/*
|
|
* TEMP: mC (-54.12C to +157.53C)
|
|
* REG: 0.83C/bit + 52.12, two's complement
|
|
*/
|
|
static inline int TEMP_FROM_REG(s8 val)
|
|
{
|
|
return val * 830 + 52120;
|
|
}
|
|
static inline s8 TEMP_TO_REG(long val)
|
|
{
|
|
int nval = clamp_val(val, -54120, 157530) ;
|
|
return nval < 0 ? (nval - 5212 - 415) / 830 : (nval - 5212 + 415) / 830;
|
|
}
|
|
|
|
/*
|
|
* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
|
|
* REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
|
|
*/
|
|
static inline u8 DIV_TO_REG(int val)
|
|
{
|
|
return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
|
|
}
|
|
#define DIV_FROM_REG(val) (1 << (val))
|
|
|
|
/*
|
|
* For each registered chip, we need to keep some data in memory.
|
|
* The structure is dynamically allocated.
|
|
*/
|
|
struct sis5595_data {
|
|
unsigned short addr;
|
|
const char *name;
|
|
struct device *hwmon_dev;
|
|
struct mutex lock;
|
|
|
|
struct mutex update_lock;
|
|
bool valid; /* true if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
char maxins; /* == 3 if temp enabled, otherwise == 4 */
|
|
u8 revision; /* Reg. value */
|
|
|
|
u8 in[5]; /* Register value */
|
|
u8 in_max[5]; /* Register value */
|
|
u8 in_min[5]; /* Register value */
|
|
u8 fan[2]; /* Register value */
|
|
u8 fan_min[2]; /* Register value */
|
|
s8 temp; /* Register value */
|
|
s8 temp_over; /* Register value */
|
|
s8 temp_hyst; /* Register value */
|
|
u8 fan_div[2]; /* Register encoding, shifted right */
|
|
u16 alarms; /* Register encoding, combined */
|
|
};
|
|
|
|
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
|
|
|
|
static int sis5595_probe(struct platform_device *pdev);
|
|
static int sis5595_remove(struct platform_device *pdev);
|
|
|
|
static int sis5595_read_value(struct sis5595_data *data, u8 reg);
|
|
static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
|
|
static struct sis5595_data *sis5595_update_device(struct device *dev);
|
|
static void sis5595_init_device(struct sis5595_data *data);
|
|
|
|
static struct platform_driver sis5595_driver = {
|
|
.driver = {
|
|
.name = "sis5595",
|
|
},
|
|
.probe = sis5595_probe,
|
|
.remove = sis5595_remove,
|
|
};
|
|
|
|
/* 4 Voltages */
|
|
static ssize_t in_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
|
|
}
|
|
|
|
static ssize_t in_min_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
|
|
}
|
|
|
|
static ssize_t in_max_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
|
|
}
|
|
|
|
static ssize_t in_min_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[nr] = IN_TO_REG(val);
|
|
sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t in_max_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[nr] = IN_TO_REG(val);
|
|
sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
|
|
static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
|
|
static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
|
|
static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
|
|
|
|
/* Temperature */
|
|
static ssize_t temp1_input_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
|
|
}
|
|
|
|
static ssize_t temp1_max_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
|
|
}
|
|
|
|
static ssize_t temp1_max_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_over = TEMP_TO_REG(val);
|
|
sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t temp1_max_hyst_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
|
|
}
|
|
|
|
static ssize_t temp1_max_hyst_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_hyst = TEMP_TO_REG(val);
|
|
sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(temp1_input);
|
|
static DEVICE_ATTR_RW(temp1_max);
|
|
static DEVICE_ATTR_RW(temp1_max_hyst);
|
|
|
|
/* 2 Fans */
|
|
static ssize_t fan_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_min_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr])));
|
|
}
|
|
|
|
static ssize_t fan_min_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
|
|
sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t fan_div_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
|
|
}
|
|
|
|
/*
|
|
* Note: we save and restore the fan minimum here, because its value is
|
|
* determined in part by the fan divisor. This follows the principle of
|
|
* least surprise; the user doesn't expect the fan minimum to change just
|
|
* because the divisor changed.
|
|
*/
|
|
static ssize_t fan_div_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int nr = attr->index;
|
|
unsigned long min;
|
|
int reg;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
min = FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr]));
|
|
reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
|
|
|
|
switch (val) {
|
|
case 1:
|
|
data->fan_div[nr] = 0;
|
|
break;
|
|
case 2:
|
|
data->fan_div[nr] = 1;
|
|
break;
|
|
case 4:
|
|
data->fan_div[nr] = 2;
|
|
break;
|
|
case 8:
|
|
data->fan_div[nr] = 3;
|
|
break;
|
|
default:
|
|
dev_err(dev,
|
|
"fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
|
|
val);
|
|
mutex_unlock(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (nr) {
|
|
case 0:
|
|
reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
|
|
break;
|
|
case 1:
|
|
reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
|
|
break;
|
|
}
|
|
sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
|
|
data->fan_min[nr] =
|
|
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
|
|
sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
|
|
|
|
/* Alarms */
|
|
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->alarms);
|
|
}
|
|
static DEVICE_ATTR_RO(alarms);
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = sis5595_update_device(dev);
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
|
|
}
|
|
static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
|
|
static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
|
|
static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 15);
|
|
static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6);
|
|
static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 15);
|
|
|
|
static ssize_t name_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
static DEVICE_ATTR_RO(name);
|
|
|
|
static struct attribute *sis5595_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_div.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_name.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group sis5595_group = {
|
|
.attrs = sis5595_attributes,
|
|
};
|
|
|
|
static struct attribute *sis5595_attributes_in4[] = {
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group sis5595_group_in4 = {
|
|
.attrs = sis5595_attributes_in4,
|
|
};
|
|
|
|
static struct attribute *sis5595_attributes_temp1[] = {
|
|
&dev_attr_temp1_input.attr,
|
|
&dev_attr_temp1_max.attr,
|
|
&dev_attr_temp1_max_hyst.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group sis5595_group_temp1 = {
|
|
.attrs = sis5595_attributes_temp1,
|
|
};
|
|
|
|
/* This is called when the module is loaded */
|
|
static int sis5595_probe(struct platform_device *pdev)
|
|
{
|
|
int err = 0;
|
|
int i;
|
|
struct sis5595_data *data;
|
|
struct resource *res;
|
|
char val;
|
|
|
|
/* Reserve the ISA region */
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!devm_request_region(&pdev->dev, res->start, SIS5595_EXTENT,
|
|
sis5595_driver.driver.name))
|
|
return -EBUSY;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(struct sis5595_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&data->lock);
|
|
mutex_init(&data->update_lock);
|
|
data->addr = res->start;
|
|
data->name = "sis5595";
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/*
|
|
* Check revision and pin registers to determine whether 4 or 5 voltages
|
|
*/
|
|
data->revision = s_bridge->revision;
|
|
/* 4 voltages, 1 temp */
|
|
data->maxins = 3;
|
|
if (data->revision >= REV2MIN) {
|
|
pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
|
|
if (!(val & 0x80))
|
|
/* 5 voltages, no temps */
|
|
data->maxins = 4;
|
|
}
|
|
|
|
/* Initialize the SIS5595 chip */
|
|
sis5595_init_device(data);
|
|
|
|
/* A few vars need to be filled upon startup */
|
|
for (i = 0; i < 2; i++) {
|
|
data->fan_min[i] = sis5595_read_value(data,
|
|
SIS5595_REG_FAN_MIN(i));
|
|
}
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group);
|
|
if (err)
|
|
return err;
|
|
if (data->maxins == 4) {
|
|
err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_in4);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
} else {
|
|
err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group_temp1);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&pdev->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
|
|
return err;
|
|
}
|
|
|
|
static int sis5595_remove(struct platform_device *pdev)
|
|
{
|
|
struct sis5595_data *data = platform_get_drvdata(pdev);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
|
|
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ISA access must be locked explicitly. */
|
|
static int sis5595_read_value(struct sis5595_data *data, u8 reg)
|
|
{
|
|
int res;
|
|
|
|
mutex_lock(&data->lock);
|
|
outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
|
|
res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
|
|
mutex_unlock(&data->lock);
|
|
return res;
|
|
}
|
|
|
|
static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
|
|
{
|
|
mutex_lock(&data->lock);
|
|
outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
|
|
outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
|
|
mutex_unlock(&data->lock);
|
|
}
|
|
|
|
/* Called when we have found a new SIS5595. */
|
|
static void sis5595_init_device(struct sis5595_data *data)
|
|
{
|
|
u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
|
|
if (!(config & 0x01))
|
|
sis5595_write_value(data, SIS5595_REG_CONFIG,
|
|
(config & 0xf7) | 0x01);
|
|
}
|
|
|
|
static struct sis5595_data *sis5595_update_device(struct device *dev)
|
|
{
|
|
struct sis5595_data *data = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
|
|
for (i = 0; i <= data->maxins; i++) {
|
|
data->in[i] =
|
|
sis5595_read_value(data, SIS5595_REG_IN(i));
|
|
data->in_min[i] =
|
|
sis5595_read_value(data,
|
|
SIS5595_REG_IN_MIN(i));
|
|
data->in_max[i] =
|
|
sis5595_read_value(data,
|
|
SIS5595_REG_IN_MAX(i));
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
data->fan[i] =
|
|
sis5595_read_value(data, SIS5595_REG_FAN(i));
|
|
data->fan_min[i] =
|
|
sis5595_read_value(data,
|
|
SIS5595_REG_FAN_MIN(i));
|
|
}
|
|
if (data->maxins == 3) {
|
|
data->temp =
|
|
sis5595_read_value(data, SIS5595_REG_TEMP);
|
|
data->temp_over =
|
|
sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
|
|
data->temp_hyst =
|
|
sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
|
|
}
|
|
i = sis5595_read_value(data, SIS5595_REG_FANDIV);
|
|
data->fan_div[0] = (i >> 4) & 0x03;
|
|
data->fan_div[1] = i >> 6;
|
|
data->alarms =
|
|
sis5595_read_value(data, SIS5595_REG_ALARM1) |
|
|
(sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static const struct pci_device_id sis5595_pci_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
|
|
|
|
static int blacklist[] = {
|
|
PCI_DEVICE_ID_SI_540,
|
|
PCI_DEVICE_ID_SI_550,
|
|
PCI_DEVICE_ID_SI_630,
|
|
PCI_DEVICE_ID_SI_645,
|
|
PCI_DEVICE_ID_SI_730,
|
|
PCI_DEVICE_ID_SI_735,
|
|
PCI_DEVICE_ID_SI_5511, /*
|
|
* 5513 chip has the 0008 device but
|
|
* that ID shows up in other chips so we
|
|
* use the 5511 ID for recognition
|
|
*/
|
|
PCI_DEVICE_ID_SI_5597,
|
|
PCI_DEVICE_ID_SI_5598,
|
|
0 };
|
|
|
|
static int sis5595_device_add(unsigned short address)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + SIS5595_EXTENT - 1,
|
|
.name = "sis5595",
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err)
|
|
goto exit;
|
|
|
|
pdev = platform_device_alloc("sis5595", address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
pr_err("Device allocation failed\n");
|
|
goto exit;
|
|
}
|
|
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
pr_err("Device resource addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
pr_err("Device addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int sis5595_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
u16 address;
|
|
u8 enable;
|
|
int *i;
|
|
|
|
for (i = blacklist; *i != 0; i++) {
|
|
struct pci_dev *d;
|
|
d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL);
|
|
if (d) {
|
|
dev_err(&d->dev,
|
|
"Looked for SIS5595 but found unsupported device %.4x\n",
|
|
*i);
|
|
pci_dev_put(d);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
force_addr &= ~(SIS5595_EXTENT - 1);
|
|
if (force_addr) {
|
|
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
|
|
pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
|
|
}
|
|
|
|
if (PCIBIOS_SUCCESSFUL !=
|
|
pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
|
|
dev_err(&dev->dev, "Failed to read ISA address\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
address &= ~(SIS5595_EXTENT - 1);
|
|
if (!address) {
|
|
dev_err(&dev->dev,
|
|
"Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
|
|
return -ENODEV;
|
|
}
|
|
if (force_addr && address != force_addr) {
|
|
/* doesn't work for some chips? */
|
|
dev_err(&dev->dev, "Failed to force ISA address\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (PCIBIOS_SUCCESSFUL !=
|
|
pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
|
|
dev_err(&dev->dev, "Failed to read enable register\n");
|
|
return -ENODEV;
|
|
}
|
|
if (!(enable & 0x80)) {
|
|
if ((PCIBIOS_SUCCESSFUL !=
|
|
pci_write_config_byte(dev, SIS5595_ENABLE_REG,
|
|
enable | 0x80))
|
|
|| (PCIBIOS_SUCCESSFUL !=
|
|
pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
|
|
|| (!(enable & 0x80))) {
|
|
/* doesn't work for some chips! */
|
|
dev_err(&dev->dev, "Failed to enable HWM device\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (platform_driver_register(&sis5595_driver)) {
|
|
dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
|
|
goto exit;
|
|
}
|
|
|
|
s_bridge = pci_dev_get(dev);
|
|
/* Sets global pdev as a side effect */
|
|
if (sis5595_device_add(address))
|
|
goto exit_unregister;
|
|
|
|
/*
|
|
* Always return failure here. This is to allow other drivers to bind
|
|
* to this pci device. We don't really want to have control over the
|
|
* pci device, we only wanted to read as few register values from it.
|
|
*/
|
|
return -ENODEV;
|
|
|
|
exit_unregister:
|
|
pci_dev_put(dev);
|
|
platform_driver_unregister(&sis5595_driver);
|
|
exit:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct pci_driver sis5595_pci_driver = {
|
|
.name = "sis5595",
|
|
.id_table = sis5595_pci_ids,
|
|
.probe = sis5595_pci_probe,
|
|
};
|
|
|
|
static int __init sm_sis5595_init(void)
|
|
{
|
|
return pci_register_driver(&sis5595_pci_driver);
|
|
}
|
|
|
|
static void __exit sm_sis5595_exit(void)
|
|
{
|
|
pci_unregister_driver(&sis5595_pci_driver);
|
|
if (s_bridge != NULL) {
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&sis5595_driver);
|
|
pci_dev_put(s_bridge);
|
|
s_bridge = NULL;
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
|
|
MODULE_DESCRIPTION("SiS 5595 Sensor device");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sm_sis5595_init);
|
|
module_exit(sm_sis5595_exit);
|