cff1d293bb
Now that we have yaml bindings for the thermal subsystem, get rid of the old bindings (thermal.txt). Replace all references to thermal.txt in the Documentation with a link to the appropriate YAML bindings using the following search and replace pattern: - If the reference is specific to the thermal-sensor-cells property, replace with a pointer to thermal-sensor.yaml - If the reference is to the cooling-cells property, replace with a pointer to thermal-cooling-devices.yaml - If the reference is generic thermal bindings, replace with a reference to thermal*.yaml. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/e9aacd33071a00568b67e110fa3bcc4d86d3e1e4.1595245166.git.amit.kucheria@linaro.org
34 lines
768 B
Plaintext
34 lines
768 B
Plaintext
Amazon's Annapurna Labs Thermal Sensor
|
|
|
|
Simple thermal device that allows temperature reading by a single MMIO
|
|
transaction.
|
|
|
|
Required properties:
|
|
- compatible: "amazon,al-thermal".
|
|
- reg: The physical base address and length of the sensor's registers.
|
|
- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
|
|
|
|
Example:
|
|
thermal: thermal {
|
|
compatible = "amazon,al-thermal";
|
|
reg = <0x0 0x05002860 0x0 0x1>;
|
|
#thermal-sensor-cells = <0x1>;
|
|
};
|
|
|
|
thermal-zones {
|
|
thermal-z0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&thermal 0>;
|
|
trips {
|
|
critical {
|
|
temperature = <105000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
};
|
|
};
|
|
|