4d75faa044
This patch adds an infrastructure to support regmap-based verb accesses. Because o the asymmetric nature of HD-audio verbs, especially the amp verbs, we need to translate the verbs as a sort of pseudo registers to be mapped uniquely in regmap. In this patch, a pseudo register is built from the NID, the AC_VERB_GET_* and 8bit parameters, i.e. almost in the form to be sent to HD-audio bus but without codec address field. OTOH, for writing, the same pseudo register is translated to AC_VERB_SET_* automatically. The AC_VERB_SET_AMP_* verb is re-encoded from the corresponding AC_VERB_GET_AMP_* verb and parameter at writing. Some verbs has a single command for read but multiple for writes. A write for such a verb is split automatically to multiple verbs. The patch provides also a few handy helper functions. They are designed to be accessible even without regmap. When no regmap is set up (e.g. before the codec device instantiation), the direct hardware access is used. Also, it tries to avoid the unnecessary power-up. The power up/down sequence is performed only on demand. The codec driver needs to call snd_hdac_regmap_exit() and snd_hdac_regmap_exit() at probe and remove if it wants the regmap access. There is one flag added to hdac_device. When the flag lazy_cache is set, regmap helper ignores a write for a suspended device and returns as if it was actually written. It reduces the hardware access pretty much, e.g. when adjusting the mixer volume while in idle. This assumes that the driver will sync the cache later at resume properly, so use it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de>
305 lines
7.0 KiB
C
305 lines
7.0 KiB
C
/*
|
|
* Regmap support for HD-audio verbs
|
|
*
|
|
* A virtual register is translated to one or more hda verbs for write,
|
|
* vice versa for read.
|
|
*
|
|
* A few limitations:
|
|
* - Provided for not all verbs but only subset standard non-volatile verbs.
|
|
* - For reading, only AC_VERB_GET_* variants can be used.
|
|
* - For writing, mapped to the *corresponding* AC_VERB_SET_* variants,
|
|
* so can't handle asymmetric verbs for read and write
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/export.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <sound/core.h>
|
|
#include <sound/hdaudio.h>
|
|
#include <sound/hda_regmap.h>
|
|
|
|
#ifdef CONFIG_PM
|
|
#define codec_is_running(codec) \
|
|
(atomic_read(&(codec)->in_pm) || \
|
|
!pm_runtime_suspended(&(codec)->dev))
|
|
#else
|
|
#define codec_is_running(codec) true
|
|
#endif
|
|
|
|
#define get_verb(reg) (((reg) >> 8) & 0xfff)
|
|
|
|
static bool hda_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
unsigned int verb = get_verb(reg);
|
|
|
|
switch (verb) {
|
|
case AC_VERB_GET_PROC_COEF:
|
|
case AC_VERB_GET_COEF_INDEX:
|
|
case AC_VERB_GET_PROC_STATE:
|
|
case AC_VERB_GET_POWER_STATE:
|
|
case AC_VERB_GET_PIN_SENSE:
|
|
case AC_VERB_GET_HDMI_DIP_SIZE:
|
|
case AC_VERB_GET_HDMI_ELDD:
|
|
case AC_VERB_GET_HDMI_DIP_INDEX:
|
|
case AC_VERB_GET_HDMI_DIP_DATA:
|
|
case AC_VERB_GET_HDMI_DIP_XMIT:
|
|
case AC_VERB_GET_HDMI_CP_CTRL:
|
|
case AC_VERB_GET_HDMI_CHAN_SLOT:
|
|
case AC_VERB_GET_DEVICE_SEL:
|
|
case AC_VERB_GET_DEVICE_LIST: /* read-only volatile */
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool hda_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
unsigned int verb = get_verb(reg);
|
|
|
|
switch (verb & 0xf00) {
|
|
case AC_VERB_GET_STREAM_FORMAT:
|
|
case AC_VERB_GET_AMP_GAIN_MUTE:
|
|
return true;
|
|
case 0xf00:
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
switch (verb) {
|
|
case AC_VERB_GET_CONNECT_SEL:
|
|
case AC_VERB_GET_SDI_SELECT:
|
|
case AC_VERB_GET_CONV:
|
|
case AC_VERB_GET_PIN_WIDGET_CONTROL:
|
|
case AC_VERB_GET_UNSOLICITED_RESPONSE: /* only as SET_UNSOLICITED_ENABLE */
|
|
case AC_VERB_GET_BEEP_CONTROL:
|
|
case AC_VERB_GET_EAPD_BTLENABLE:
|
|
case AC_VERB_GET_DIGI_CONVERT_1:
|
|
case AC_VERB_GET_DIGI_CONVERT_2: /* only for beep control */
|
|
case AC_VERB_GET_VOLUME_KNOB_CONTROL:
|
|
case AC_VERB_GET_CONFIG_DEFAULT:
|
|
case AC_VERB_GET_GPIO_MASK:
|
|
case AC_VERB_GET_GPIO_DIRECTION:
|
|
case AC_VERB_GET_GPIO_DATA: /* not for volatile read */
|
|
case AC_VERB_GET_GPIO_WAKE_MASK:
|
|
case AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK:
|
|
case AC_VERB_GET_GPIO_STICKY_MASK:
|
|
case AC_VERB_GET_CVT_CHAN_COUNT:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool hda_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
unsigned int verb = get_verb(reg);
|
|
|
|
switch (verb) {
|
|
case AC_VERB_PARAMETERS:
|
|
case AC_VERB_GET_CONNECT_LIST:
|
|
case AC_VERB_GET_SUBSYSTEM_ID:
|
|
return true;
|
|
}
|
|
|
|
return hda_writeable_reg(dev, reg);
|
|
}
|
|
|
|
static int hda_reg_read(void *context, unsigned int reg, unsigned int *val)
|
|
{
|
|
struct hdac_device *codec = context;
|
|
|
|
if (!codec_is_running(codec))
|
|
return -EAGAIN;
|
|
reg |= (codec->addr << 28);
|
|
return snd_hdac_exec_verb(codec, reg, 0, val);
|
|
}
|
|
|
|
static int hda_reg_write(void *context, unsigned int reg, unsigned int val)
|
|
{
|
|
struct hdac_device *codec = context;
|
|
unsigned int verb;
|
|
int i, bytes, err;
|
|
|
|
if (!codec_is_running(codec))
|
|
return codec->lazy_cache ? 0 : -EAGAIN;
|
|
|
|
reg &= ~0x00080000U; /* drop GET bit */
|
|
reg |= (codec->addr << 28);
|
|
verb = get_verb(reg);
|
|
|
|
switch (verb & 0xf00) {
|
|
case AC_VERB_SET_AMP_GAIN_MUTE:
|
|
verb = AC_VERB_SET_AMP_GAIN_MUTE;
|
|
if (reg & AC_AMP_GET_LEFT)
|
|
verb |= AC_AMP_SET_LEFT >> 8;
|
|
else
|
|
verb |= AC_AMP_SET_RIGHT >> 8;
|
|
if (reg & AC_AMP_GET_OUTPUT) {
|
|
verb |= AC_AMP_SET_OUTPUT >> 8;
|
|
} else {
|
|
verb |= AC_AMP_SET_INPUT >> 8;
|
|
verb |= reg & 0xf;
|
|
}
|
|
break;
|
|
}
|
|
|
|
switch (verb) {
|
|
case AC_VERB_SET_DIGI_CONVERT_1:
|
|
bytes = 2;
|
|
break;
|
|
case AC_VERB_SET_CONFIG_DEFAULT_BYTES_0:
|
|
bytes = 4;
|
|
break;
|
|
default:
|
|
bytes = 1;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < bytes; i++) {
|
|
reg &= ~0xfffff;
|
|
reg |= (verb + i) << 8 | ((val >> (8 * i)) & 0xff);
|
|
err = snd_hdac_exec_verb(codec, reg, 0, NULL);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config hda_regmap_cfg = {
|
|
.name = "hdaudio",
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.max_register = 0xfffffff,
|
|
.writeable_reg = hda_writeable_reg,
|
|
.readable_reg = hda_readable_reg,
|
|
.volatile_reg = hda_volatile_reg,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.reg_read = hda_reg_read,
|
|
.reg_write = hda_reg_write,
|
|
};
|
|
|
|
int snd_hdac_regmap_init(struct hdac_device *codec)
|
|
{
|
|
struct regmap *regmap;
|
|
|
|
regmap = regmap_init(&codec->dev, NULL, codec, &hda_regmap_cfg);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
codec->regmap = regmap;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_hdac_regmap_init);
|
|
|
|
void snd_hdac_regmap_exit(struct hdac_device *codec)
|
|
{
|
|
if (codec->regmap) {
|
|
regmap_exit(codec->regmap);
|
|
codec->regmap = NULL;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_hdac_regmap_exit);
|
|
|
|
/*
|
|
* helper functions
|
|
*/
|
|
|
|
/* write a pseudo-register value (w/o power sequence) */
|
|
static int reg_raw_write(struct hdac_device *codec, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
if (!codec->regmap)
|
|
return hda_reg_write(codec, reg, val);
|
|
else
|
|
return regmap_write(codec->regmap, reg, val);
|
|
}
|
|
|
|
/**
|
|
* snd_hdac_regmap_write_raw - write a pseudo register with power mgmt
|
|
* @codec: the codec object
|
|
* @reg: pseudo register
|
|
* @val: value to write
|
|
*
|
|
* Returns zero if successful or a negative error code.
|
|
*/
|
|
int snd_hdac_regmap_write_raw(struct hdac_device *codec, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
int err;
|
|
|
|
err = reg_raw_write(codec, reg, val);
|
|
if (err == -EAGAIN) {
|
|
snd_hdac_power_up(codec);
|
|
err = reg_raw_write(codec, reg, val);
|
|
snd_hdac_power_down(codec);
|
|
}
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_hdac_regmap_write_raw);
|
|
|
|
static int reg_raw_read(struct hdac_device *codec, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
if (!codec->regmap)
|
|
return hda_reg_read(codec, reg, val);
|
|
else
|
|
return regmap_read(codec->regmap, reg, val);
|
|
}
|
|
|
|
/**
|
|
* snd_hdac_regmap_read_raw - read a pseudo register with power mgmt
|
|
* @codec: the codec object
|
|
* @reg: pseudo register
|
|
* @val: pointer to store the read value
|
|
*
|
|
* Returns zero if successful or a negative error code.
|
|
*/
|
|
int snd_hdac_regmap_read_raw(struct hdac_device *codec, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
int err;
|
|
|
|
err = reg_raw_read(codec, reg, val);
|
|
if (err == -EAGAIN) {
|
|
snd_hdac_power_up(codec);
|
|
err = reg_raw_read(codec, reg, val);
|
|
snd_hdac_power_down(codec);
|
|
}
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_hdac_regmap_read_raw);
|
|
|
|
/**
|
|
* snd_hdac_regmap_update_raw - update a pseudo register with power mgmt
|
|
* @codec: the codec object
|
|
* @reg: pseudo register
|
|
* @mask: bit mask to udpate
|
|
* @val: value to update
|
|
*
|
|
* Returns zero if successful or a negative error code.
|
|
*/
|
|
int snd_hdac_regmap_update_raw(struct hdac_device *codec, unsigned int reg,
|
|
unsigned int mask, unsigned int val)
|
|
{
|
|
unsigned int orig;
|
|
int err;
|
|
|
|
val &= mask;
|
|
err = snd_hdac_regmap_read_raw(codec, reg, &orig);
|
|
if (err < 0)
|
|
return err;
|
|
val |= orig & ~mask;
|
|
if (val == orig)
|
|
return 0;
|
|
err = snd_hdac_regmap_write_raw(codec, reg, val);
|
|
if (err < 0)
|
|
return err;
|
|
return 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_hdac_regmap_update_raw);
|