linux/tools/testing/selftests/x86/fsgsbase.c
Andy Lutomirski 8e259031c6 selftests/x86/fsgsbase: Add a missing memory constraint
The manual call to set_thread_area() via int $0x80 was missing any
indication that the descriptor was a pointer, causing gcc to
occasionally generate wrong code.  Add the missing constraint.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/432968af67259ca92d68b774a731aff468eae610.1593192140.git.luto@kernel.org
2020-07-01 15:27:20 +02:00

611 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* fsgsbase.c, an fsgsbase test
* Copyright (c) 2014-2016 Andy Lutomirski
*/
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <err.h>
#include <sys/user.h>
#include <asm/prctl.h>
#include <sys/prctl.h>
#include <signal.h>
#include <limits.h>
#include <sys/ucontext.h>
#include <sched.h>
#include <linux/futex.h>
#include <pthread.h>
#include <asm/ldt.h>
#include <sys/mman.h>
#include <stddef.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <setjmp.h>
#ifndef __x86_64__
# error This test is 64-bit only
#endif
static volatile sig_atomic_t want_segv;
static volatile unsigned long segv_addr;
static unsigned short *shared_scratch;
static int nerrs;
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
{
struct sigaction sa;
memset(&sa, 0, sizeof(sa));
sa.sa_sigaction = handler;
sa.sa_flags = SA_SIGINFO | flags;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
err(1, "sigaction");
}
static void clearhandler(int sig)
{
struct sigaction sa;
memset(&sa, 0, sizeof(sa));
sa.sa_handler = SIG_DFL;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
err(1, "sigaction");
}
static void sigsegv(int sig, siginfo_t *si, void *ctx_void)
{
ucontext_t *ctx = (ucontext_t*)ctx_void;
if (!want_segv) {
clearhandler(SIGSEGV);
return; /* Crash cleanly. */
}
want_segv = false;
segv_addr = (unsigned long)si->si_addr;
ctx->uc_mcontext.gregs[REG_RIP] += 4; /* Skip the faulting mov */
}
static jmp_buf jmpbuf;
static void sigill(int sig, siginfo_t *si, void *ctx_void)
{
siglongjmp(jmpbuf, 1);
}
static bool have_fsgsbase;
static inline unsigned long rdgsbase(void)
{
unsigned long gsbase;
asm volatile("rdgsbase %0" : "=r" (gsbase) :: "memory");
return gsbase;
}
static inline unsigned long rdfsbase(void)
{
unsigned long fsbase;
asm volatile("rdfsbase %0" : "=r" (fsbase) :: "memory");
return fsbase;
}
static inline void wrgsbase(unsigned long gsbase)
{
asm volatile("wrgsbase %0" :: "r" (gsbase) : "memory");
}
static inline void wrfsbase(unsigned long fsbase)
{
asm volatile("wrfsbase %0" :: "r" (fsbase) : "memory");
}
enum which_base { FS, GS };
static unsigned long read_base(enum which_base which)
{
unsigned long offset;
/*
* Unless we have FSGSBASE, there's no direct way to do this from
* user mode. We can get at it indirectly using signals, though.
*/
want_segv = true;
offset = 0;
if (which == FS) {
/* Use a constant-length instruction here. */
asm volatile ("mov %%fs:(%%rcx), %%rax" : : "c" (offset) : "rax");
} else {
asm volatile ("mov %%gs:(%%rcx), %%rax" : : "c" (offset) : "rax");
}
if (!want_segv)
return segv_addr + offset;
/*
* If that didn't segfault, try the other end of the address space.
* Unless we get really unlucky and run into the vsyscall page, this
* is guaranteed to segfault.
*/
offset = (ULONG_MAX >> 1) + 1;
if (which == FS) {
asm volatile ("mov %%fs:(%%rcx), %%rax"
: : "c" (offset) : "rax");
} else {
asm volatile ("mov %%gs:(%%rcx), %%rax"
: : "c" (offset) : "rax");
}
if (!want_segv)
return segv_addr + offset;
abort();
}
static void check_gs_value(unsigned long value)
{
unsigned long base;
unsigned short sel;
printf("[RUN]\tARCH_SET_GS to 0x%lx\n", value);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, value) != 0)
err(1, "ARCH_SET_GS");
asm volatile ("mov %%gs, %0" : "=rm" (sel));
base = read_base(GS);
if (base == value) {
printf("[OK]\tGSBASE was set as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
printf("[FAIL]\tGSBASE was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}
if (syscall(SYS_arch_prctl, ARCH_GET_GS, &base) != 0)
err(1, "ARCH_GET_GS");
if (base == value) {
printf("[OK]\tARCH_GET_GS worked as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
printf("[FAIL]\tARCH_GET_GS was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}
}
static void mov_0_gs(unsigned long initial_base, bool schedule)
{
unsigned long base, arch_base;
printf("[RUN]\tARCH_SET_GS to 0x%lx then mov 0 to %%gs%s\n", initial_base, schedule ? " and schedule " : "");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, initial_base) != 0)
err(1, "ARCH_SET_GS");
if (schedule)
usleep(10);
asm volatile ("mov %0, %%gs" : : "rm" (0));
base = read_base(GS);
if (syscall(SYS_arch_prctl, ARCH_GET_GS, &arch_base) != 0)
err(1, "ARCH_GET_GS");
if (base == arch_base) {
printf("[OK]\tGSBASE is 0x%lx\n", base);
} else {
nerrs++;
printf("[FAIL]\tGSBASE changed to 0x%lx but kernel reports 0x%lx\n", base, arch_base);
}
}
static volatile unsigned long remote_base;
static volatile bool remote_hard_zero;
static volatile unsigned int ftx;
/*
* ARCH_SET_FS/GS(0) may or may not program a selector of zero. HARD_ZERO
* means to force the selector to zero to improve test coverage.
*/
#define HARD_ZERO 0xa1fa5f343cb85fa4
static void do_remote_base()
{
unsigned long to_set = remote_base;
bool hard_zero = false;
if (to_set == HARD_ZERO) {
to_set = 0;
hard_zero = true;
}
if (syscall(SYS_arch_prctl, ARCH_SET_GS, to_set) != 0)
err(1, "ARCH_SET_GS");
if (hard_zero)
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
unsigned short sel;
asm volatile ("mov %%gs, %0" : "=rm" (sel));
printf("\tother thread: ARCH_SET_GS(0x%lx)%s -- sel is 0x%hx\n",
to_set, hard_zero ? " and clear gs" : "", sel);
}
static __thread int set_thread_area_entry_number = -1;
static unsigned short load_gs(void)
{
/*
* Sets GS != 0 and GSBASE != 0 but arranges for the kernel to think
* that GSBASE == 0 (i.e. thread.gsbase == 0).
*/
/* Step 1: tell the kernel that we have GSBASE == 0. */
if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0)
err(1, "ARCH_SET_GS");
/* Step 2: change GSBASE without telling the kernel. */
struct user_desc desc = {
.entry_number = 0,
.base_addr = 0xBAADF00D,
.limit = 0xfffff,
.seg_32bit = 1,
.contents = 0, /* Data, grow-up */
.read_exec_only = 0,
.limit_in_pages = 1,
.seg_not_present = 0,
.useable = 0
};
if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) == 0) {
printf("\tusing LDT slot 0\n");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0x7));
return 0x7;
} else {
/* No modify_ldt for us (configured out, perhaps) */
struct user_desc *low_desc = mmap(
NULL, sizeof(desc),
PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_32BIT, -1, 0);
memcpy(low_desc, &desc, sizeof(desc));
low_desc->entry_number = set_thread_area_entry_number;
/* 32-bit set_thread_area */
long ret;
asm volatile ("int $0x80"
: "=a" (ret), "+m" (*low_desc)
: "a" (243), "b" (low_desc)
: "r8", "r9", "r10", "r11");
memcpy(&desc, low_desc, sizeof(desc));
munmap(low_desc, sizeof(desc));
if (ret != 0) {
printf("[NOTE]\tcould not create a segment -- test won't do anything\n");
return 0;
}
printf("\tusing GDT slot %d\n", desc.entry_number);
set_thread_area_entry_number = desc.entry_number;
unsigned short gs = (unsigned short)((desc.entry_number << 3) | 0x3);
asm volatile ("mov %0, %%gs" : : "rm" (gs));
return gs;
}
}
void test_wrbase(unsigned short index, unsigned long base)
{
unsigned short newindex;
unsigned long newbase;
printf("[RUN]\tGS = 0x%hx, GSBASE = 0x%lx\n", index, base);
asm volatile ("mov %0, %%gs" : : "rm" (index));
wrgsbase(base);
remote_base = 0;
ftx = 1;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
asm volatile ("mov %%gs, %0" : "=rm" (newindex));
newbase = rdgsbase();
if (newindex == index && newbase == base) {
printf("[OK]\tIndex and base were preserved\n");
} else {
printf("[FAIL]\tAfter switch, GS = 0x%hx and GSBASE = 0x%lx\n",
newindex, newbase);
nerrs++;
}
}
static void *threadproc(void *ctx)
{
while (1) {
while (ftx == 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 0, NULL, NULL, 0);
if (ftx == 3)
return NULL;
if (ftx == 1) {
do_remote_base();
} else if (ftx == 2) {
/*
* On AMD chips, this causes GSBASE != 0, GS == 0, and
* thread.gsbase == 0.
*/
load_gs();
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
} else {
errx(1, "helper thread got bad command");
}
ftx = 0;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
}
}
static void set_gs_and_switch_to(unsigned long local,
unsigned short force_sel,
unsigned long remote)
{
unsigned long base;
unsigned short sel_pre_sched, sel_post_sched;
bool hard_zero = false;
if (local == HARD_ZERO) {
hard_zero = true;
local = 0;
}
printf("[RUN]\tARCH_SET_GS(0x%lx)%s, then schedule to 0x%lx\n",
local, hard_zero ? " and clear gs" : "", remote);
if (force_sel)
printf("\tBefore schedule, set selector to 0x%hx\n", force_sel);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, local) != 0)
err(1, "ARCH_SET_GS");
if (hard_zero)
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
if (read_base(GS) != local) {
nerrs++;
printf("[FAIL]\tGSBASE wasn't set as expected\n");
}
if (force_sel) {
asm volatile ("mov %0, %%gs" : : "rm" (force_sel));
sel_pre_sched = force_sel;
local = read_base(GS);
/*
* Signal delivery seems to mess up weird selectors. Put it
* back.
*/
asm volatile ("mov %0, %%gs" : : "rm" (force_sel));
} else {
asm volatile ("mov %%gs, %0" : "=rm" (sel_pre_sched));
}
remote_base = remote;
ftx = 1;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
asm volatile ("mov %%gs, %0" : "=rm" (sel_post_sched));
base = read_base(GS);
if (base == local && sel_pre_sched == sel_post_sched) {
printf("[OK]\tGS/BASE remained 0x%hx/0x%lx\n",
sel_pre_sched, local);
} else {
nerrs++;
printf("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n",
sel_pre_sched, local, sel_post_sched, base);
}
}
static void test_unexpected_base(void)
{
unsigned long base;
printf("[RUN]\tARCH_SET_GS(0), clear gs, then manipulate GSBASE in a different thread\n");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0)
err(1, "ARCH_SET_GS");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
ftx = 2;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
base = read_base(GS);
if (base == 0) {
printf("[OK]\tGSBASE remained 0\n");
} else {
nerrs++;
printf("[FAIL]\tGSBASE changed to 0x%lx\n", base);
}
}
#define USER_REGS_OFFSET(r) offsetof(struct user_regs_struct, r)
static void test_ptrace_write_gsbase(void)
{
int status;
pid_t child = fork();
if (child < 0)
err(1, "fork");
if (child == 0) {
printf("[RUN]\tPTRACE_POKE(), write GSBASE from ptracer\n");
*shared_scratch = load_gs();
if (ptrace(PTRACE_TRACEME, 0, NULL, NULL) != 0)
err(1, "PTRACE_TRACEME");
raise(SIGTRAP);
_exit(0);
}
wait(&status);
if (WSTOPSIG(status) == SIGTRAP) {
unsigned long gs, base;
unsigned long gs_offset = USER_REGS_OFFSET(gs);
unsigned long base_offset = USER_REGS_OFFSET(gs_base);
gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL);
if (gs != *shared_scratch) {
nerrs++;
printf("[FAIL]\tGS is not prepared with nonzero\n");
goto END;
}
if (ptrace(PTRACE_POKEUSER, child, base_offset, 0xFF) != 0)
err(1, "PTRACE_POKEUSER");
gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL);
base = ptrace(PTRACE_PEEKUSER, child, base_offset, NULL);
/*
* In a non-FSGSBASE system, the nonzero selector will load
* GSBASE (again). But what is tested here is whether the
* selector value is changed or not by the GSBASE write in
* a ptracer.
*/
if (gs != *shared_scratch) {
nerrs++;
printf("[FAIL]\tGS changed to %lx\n", gs);
/*
* On older kernels, poking a nonzero value into the
* base would zero the selector. On newer kernels,
* this behavior has changed -- poking the base
* changes only the base and, if FSGSBASE is not
* available, this may have no effect once the tracee
* is resumed.
*/
if (gs == 0)
printf("\tNote: this is expected behavior on older kernels.\n");
} else if (have_fsgsbase && (base != 0xFF)) {
nerrs++;
printf("[FAIL]\tGSBASE changed to %lx\n", base);
} else {
printf("[OK]\tGS remained 0x%hx", *shared_scratch);
if (have_fsgsbase)
printf(" and GSBASE changed to 0xFF");
printf("\n");
}
}
END:
ptrace(PTRACE_CONT, child, NULL, NULL);
}
int main()
{
pthread_t thread;
shared_scratch = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
/* Probe FSGSBASE */
sethandler(SIGILL, sigill, 0);
if (sigsetjmp(jmpbuf, 1) == 0) {
rdfsbase();
have_fsgsbase = true;
printf("\tFSGSBASE instructions are enabled\n");
} else {
printf("\tFSGSBASE instructions are disabled\n");
}
clearhandler(SIGILL);
sethandler(SIGSEGV, sigsegv, 0);
check_gs_value(0);
check_gs_value(1);
check_gs_value(0x200000000);
check_gs_value(0);
check_gs_value(0x200000000);
check_gs_value(1);
for (int sched = 0; sched < 2; sched++) {
mov_0_gs(0, !!sched);
mov_0_gs(1, !!sched);
mov_0_gs(0x200000000, !!sched);
}
/* Set up for multithreading. */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0)
err(1, "sched_setaffinity to CPU 0"); /* should never fail */
if (pthread_create(&thread, 0, threadproc, 0) != 0)
err(1, "pthread_create");
static unsigned long bases_with_hard_zero[] = {
0, HARD_ZERO, 1, 0x200000000,
};
for (int local = 0; local < 4; local++) {
for (int remote = 0; remote < 4; remote++) {
for (unsigned short s = 0; s < 5; s++) {
unsigned short sel = s;
if (s == 4)
asm ("mov %%ss, %0" : "=rm" (sel));
set_gs_and_switch_to(
bases_with_hard_zero[local],
sel,
bases_with_hard_zero[remote]);
}
}
}
test_unexpected_base();
if (have_fsgsbase) {
unsigned short ss;
asm volatile ("mov %%ss, %0" : "=rm" (ss));
test_wrbase(0, 0);
test_wrbase(0, 1);
test_wrbase(0, 0x200000000);
test_wrbase(0, 0xffffffffffffffff);
test_wrbase(ss, 0);
test_wrbase(ss, 1);
test_wrbase(ss, 0x200000000);
test_wrbase(ss, 0xffffffffffffffff);
}
ftx = 3; /* Kill the thread. */
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
if (pthread_join(thread, NULL) != 0)
err(1, "pthread_join");
test_ptrace_write_gsbase();
return nerrs == 0 ? 0 : 1;
}