cc6ce5ac2c
This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmIfdM8RHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FoiGlQ//UyRpMX9Bv97LAbMDnqIHLYroTLJA3WFQ AaL/DKB1cVjBCoHlp24qaQrmncvifPF7sKJGKWf7yCHL5fraAYL/kHsCo/jECTho QOk9QaPAMP9ChOoVoP8iz5qrdF2qyoFUG69bX+QYeKhSKzcK1QPRTQ13LIL43d9p OJX47Cu7FfFwuAs5VKSVgpcII0tctv+Fdo6BkkeI+6w/vx2sFSzRaqRtc1ZU4Uav s51dM9JMos52e/G8yQAEOC24QUId4EHxo7QR8WjzZ47yIHRulpYwM6pWAtvOqEy9 eV++yz581+Uqs/qaDDk8nJdpa8aEv/NvfAK6gufB9UOWziMoR3G1pPFWoOLbcyIt IcUG+QyyEiIlmlwDE/m2OcSMzsxgrkEHNb3SE7ZkWZKP8OasGdVMHa7yEKCgLmzM S8EY9TsNA50A2VtowAPrdk74TVG2WeIDvEH2MMAUMjgW2DzsW9cmwFrziyj7ZPLX onoEjd/kpL2zzAArEadvzD1z1lLJcOUWn8ST2kbPQG8n/rp5y2u5PvgWRoO9zJlD ztX614XYRgRUhMrgb0q0nCTi07mnBZrR3P8Hnx1HOoZon/DIqPSL7NumITG09cQc fHqewQOU/WqoTH4tNvfywnBL/VAcxKFlc0B2rWIvp6dD5b0TU34ZdebcjLT1zYeC 6YQKbRaRjVg= =UnWv -----END PGP SIGNATURE----- Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ...
974 lines
24 KiB
C
974 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* AD7124 SPI ADC driver
|
|
*
|
|
* Copyright 2018 Analog Devices Inc.
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/adc/ad_sigma_delta.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
/* AD7124 registers */
|
|
#define AD7124_COMMS 0x00
|
|
#define AD7124_STATUS 0x00
|
|
#define AD7124_ADC_CONTROL 0x01
|
|
#define AD7124_DATA 0x02
|
|
#define AD7124_IO_CONTROL_1 0x03
|
|
#define AD7124_IO_CONTROL_2 0x04
|
|
#define AD7124_ID 0x05
|
|
#define AD7124_ERROR 0x06
|
|
#define AD7124_ERROR_EN 0x07
|
|
#define AD7124_MCLK_COUNT 0x08
|
|
#define AD7124_CHANNEL(x) (0x09 + (x))
|
|
#define AD7124_CONFIG(x) (0x19 + (x))
|
|
#define AD7124_FILTER(x) (0x21 + (x))
|
|
#define AD7124_OFFSET(x) (0x29 + (x))
|
|
#define AD7124_GAIN(x) (0x31 + (x))
|
|
|
|
/* AD7124_STATUS */
|
|
#define AD7124_STATUS_POR_FLAG_MSK BIT(4)
|
|
|
|
/* AD7124_ADC_CONTROL */
|
|
#define AD7124_ADC_CTRL_REF_EN_MSK BIT(8)
|
|
#define AD7124_ADC_CTRL_REF_EN(x) FIELD_PREP(AD7124_ADC_CTRL_REF_EN_MSK, x)
|
|
#define AD7124_ADC_CTRL_PWR_MSK GENMASK(7, 6)
|
|
#define AD7124_ADC_CTRL_PWR(x) FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x)
|
|
#define AD7124_ADC_CTRL_MODE_MSK GENMASK(5, 2)
|
|
#define AD7124_ADC_CTRL_MODE(x) FIELD_PREP(AD7124_ADC_CTRL_MODE_MSK, x)
|
|
|
|
/* AD7124 ID */
|
|
#define AD7124_DEVICE_ID_MSK GENMASK(7, 4)
|
|
#define AD7124_DEVICE_ID_GET(x) FIELD_GET(AD7124_DEVICE_ID_MSK, x)
|
|
#define AD7124_SILICON_REV_MSK GENMASK(3, 0)
|
|
#define AD7124_SILICON_REV_GET(x) FIELD_GET(AD7124_SILICON_REV_MSK, x)
|
|
|
|
#define CHIPID_AD7124_4 0x0
|
|
#define CHIPID_AD7124_8 0x1
|
|
|
|
/* AD7124_CHANNEL_X */
|
|
#define AD7124_CHANNEL_EN_MSK BIT(15)
|
|
#define AD7124_CHANNEL_EN(x) FIELD_PREP(AD7124_CHANNEL_EN_MSK, x)
|
|
#define AD7124_CHANNEL_SETUP_MSK GENMASK(14, 12)
|
|
#define AD7124_CHANNEL_SETUP(x) FIELD_PREP(AD7124_CHANNEL_SETUP_MSK, x)
|
|
#define AD7124_CHANNEL_AINP_MSK GENMASK(9, 5)
|
|
#define AD7124_CHANNEL_AINP(x) FIELD_PREP(AD7124_CHANNEL_AINP_MSK, x)
|
|
#define AD7124_CHANNEL_AINM_MSK GENMASK(4, 0)
|
|
#define AD7124_CHANNEL_AINM(x) FIELD_PREP(AD7124_CHANNEL_AINM_MSK, x)
|
|
|
|
/* AD7124_CONFIG_X */
|
|
#define AD7124_CONFIG_BIPOLAR_MSK BIT(11)
|
|
#define AD7124_CONFIG_BIPOLAR(x) FIELD_PREP(AD7124_CONFIG_BIPOLAR_MSK, x)
|
|
#define AD7124_CONFIG_REF_SEL_MSK GENMASK(4, 3)
|
|
#define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
|
|
#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
|
|
#define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
|
|
#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(6, 5)
|
|
#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
|
|
|
|
/* AD7124_FILTER_X */
|
|
#define AD7124_FILTER_FS_MSK GENMASK(10, 0)
|
|
#define AD7124_FILTER_FS(x) FIELD_PREP(AD7124_FILTER_FS_MSK, x)
|
|
#define AD7124_FILTER_TYPE_MSK GENMASK(23, 21)
|
|
#define AD7124_FILTER_TYPE_SEL(x) FIELD_PREP(AD7124_FILTER_TYPE_MSK, x)
|
|
|
|
#define AD7124_SINC3_FILTER 2
|
|
#define AD7124_SINC4_FILTER 0
|
|
|
|
#define AD7124_CONF_ADDR_OFFSET 20
|
|
#define AD7124_MAX_CONFIGS 8
|
|
#define AD7124_MAX_CHANNELS 16
|
|
|
|
enum ad7124_ids {
|
|
ID_AD7124_4,
|
|
ID_AD7124_8,
|
|
};
|
|
|
|
enum ad7124_ref_sel {
|
|
AD7124_REFIN1,
|
|
AD7124_REFIN2,
|
|
AD7124_INT_REF,
|
|
AD7124_AVDD_REF,
|
|
};
|
|
|
|
enum ad7124_power_mode {
|
|
AD7124_LOW_POWER,
|
|
AD7124_MID_POWER,
|
|
AD7124_FULL_POWER,
|
|
};
|
|
|
|
static const unsigned int ad7124_gain[8] = {
|
|
1, 2, 4, 8, 16, 32, 64, 128
|
|
};
|
|
|
|
static const unsigned int ad7124_reg_size[] = {
|
|
1, 2, 3, 3, 2, 1, 3, 3, 1, 2, 2, 2, 2,
|
|
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
|
|
2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3,
|
|
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
|
|
3, 3, 3, 3, 3
|
|
};
|
|
|
|
static const int ad7124_master_clk_freq_hz[3] = {
|
|
[AD7124_LOW_POWER] = 76800,
|
|
[AD7124_MID_POWER] = 153600,
|
|
[AD7124_FULL_POWER] = 614400,
|
|
};
|
|
|
|
static const char * const ad7124_ref_names[] = {
|
|
[AD7124_REFIN1] = "refin1",
|
|
[AD7124_REFIN2] = "refin2",
|
|
[AD7124_INT_REF] = "int",
|
|
[AD7124_AVDD_REF] = "avdd",
|
|
};
|
|
|
|
struct ad7124_chip_info {
|
|
const char *name;
|
|
unsigned int chip_id;
|
|
unsigned int num_inputs;
|
|
};
|
|
|
|
struct ad7124_channel_config {
|
|
bool live;
|
|
unsigned int cfg_slot;
|
|
enum ad7124_ref_sel refsel;
|
|
bool bipolar;
|
|
bool buf_positive;
|
|
bool buf_negative;
|
|
unsigned int vref_mv;
|
|
unsigned int pga_bits;
|
|
unsigned int odr;
|
|
unsigned int odr_sel_bits;
|
|
unsigned int filter_type;
|
|
};
|
|
|
|
struct ad7124_channel {
|
|
unsigned int nr;
|
|
struct ad7124_channel_config cfg;
|
|
unsigned int ain;
|
|
unsigned int slot;
|
|
};
|
|
|
|
struct ad7124_state {
|
|
const struct ad7124_chip_info *chip_info;
|
|
struct ad_sigma_delta sd;
|
|
struct ad7124_channel *channels;
|
|
struct regulator *vref[4];
|
|
struct clk *mclk;
|
|
unsigned int adc_control;
|
|
unsigned int num_channels;
|
|
struct mutex cfgs_lock; /* lock for configs access */
|
|
unsigned long cfg_slots_status; /* bitmap with slot status (1 means it is used) */
|
|
DECLARE_KFIFO(live_cfgs_fifo, struct ad7124_channel_config *, AD7124_MAX_CONFIGS);
|
|
};
|
|
|
|
static const struct iio_chan_spec ad7124_channel_template = {
|
|
.type = IIO_VOLTAGE,
|
|
.indexed = 1,
|
|
.differential = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 24,
|
|
.storagebits = 32,
|
|
.shift = 8,
|
|
.endianness = IIO_BE,
|
|
},
|
|
};
|
|
|
|
static struct ad7124_chip_info ad7124_chip_info_tbl[] = {
|
|
[ID_AD7124_4] = {
|
|
.name = "ad7124-4",
|
|
.chip_id = CHIPID_AD7124_4,
|
|
.num_inputs = 8,
|
|
},
|
|
[ID_AD7124_8] = {
|
|
.name = "ad7124-8",
|
|
.chip_id = CHIPID_AD7124_8,
|
|
.num_inputs = 16,
|
|
},
|
|
};
|
|
|
|
static int ad7124_find_closest_match(const int *array,
|
|
unsigned int size, int val)
|
|
{
|
|
int i, idx;
|
|
unsigned int diff_new, diff_old;
|
|
|
|
diff_old = U32_MAX;
|
|
idx = 0;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
diff_new = abs(val - array[i]);
|
|
if (diff_new < diff_old) {
|
|
diff_old = diff_new;
|
|
idx = i;
|
|
}
|
|
}
|
|
|
|
return idx;
|
|
}
|
|
|
|
static int ad7124_spi_write_mask(struct ad7124_state *st,
|
|
unsigned int addr,
|
|
unsigned long mask,
|
|
unsigned int val,
|
|
unsigned int bytes)
|
|
{
|
|
unsigned int readval;
|
|
int ret;
|
|
|
|
ret = ad_sd_read_reg(&st->sd, addr, bytes, &readval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
readval &= ~mask;
|
|
readval |= val;
|
|
|
|
return ad_sd_write_reg(&st->sd, addr, bytes, readval);
|
|
}
|
|
|
|
static int ad7124_set_mode(struct ad_sigma_delta *sd,
|
|
enum ad_sigma_delta_mode mode)
|
|
{
|
|
struct ad7124_state *st = container_of(sd, struct ad7124_state, sd);
|
|
|
|
st->adc_control &= ~AD7124_ADC_CTRL_MODE_MSK;
|
|
st->adc_control |= AD7124_ADC_CTRL_MODE(mode);
|
|
|
|
return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL, 2, st->adc_control);
|
|
}
|
|
|
|
static void ad7124_set_channel_odr(struct ad7124_state *st, unsigned int channel, unsigned int odr)
|
|
{
|
|
unsigned int fclk, odr_sel_bits;
|
|
|
|
fclk = clk_get_rate(st->mclk);
|
|
/*
|
|
* FS[10:0] = fCLK / (fADC x 32) where:
|
|
* fADC is the output data rate
|
|
* fCLK is the master clock frequency
|
|
* FS[10:0] are the bits in the filter register
|
|
* FS[10:0] can have a value from 1 to 2047
|
|
*/
|
|
odr_sel_bits = DIV_ROUND_CLOSEST(fclk, odr * 32);
|
|
if (odr_sel_bits < 1)
|
|
odr_sel_bits = 1;
|
|
else if (odr_sel_bits > 2047)
|
|
odr_sel_bits = 2047;
|
|
|
|
if (odr_sel_bits != st->channels[channel].cfg.odr_sel_bits)
|
|
st->channels[channel].cfg.live = false;
|
|
|
|
/* fADC = fCLK / (FS[10:0] x 32) */
|
|
st->channels[channel].cfg.odr = DIV_ROUND_CLOSEST(fclk, odr_sel_bits * 32);
|
|
st->channels[channel].cfg.odr_sel_bits = odr_sel_bits;
|
|
}
|
|
|
|
static int ad7124_get_3db_filter_freq(struct ad7124_state *st,
|
|
unsigned int channel)
|
|
{
|
|
unsigned int fadc;
|
|
|
|
fadc = st->channels[channel].cfg.odr;
|
|
|
|
switch (st->channels[channel].cfg.filter_type) {
|
|
case AD7124_SINC3_FILTER:
|
|
return DIV_ROUND_CLOSEST(fadc * 230, 1000);
|
|
case AD7124_SINC4_FILTER:
|
|
return DIV_ROUND_CLOSEST(fadc * 262, 1000);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void ad7124_set_3db_filter_freq(struct ad7124_state *st, unsigned int channel,
|
|
unsigned int freq)
|
|
{
|
|
unsigned int sinc4_3db_odr;
|
|
unsigned int sinc3_3db_odr;
|
|
unsigned int new_filter;
|
|
unsigned int new_odr;
|
|
|
|
sinc4_3db_odr = DIV_ROUND_CLOSEST(freq * 1000, 230);
|
|
sinc3_3db_odr = DIV_ROUND_CLOSEST(freq * 1000, 262);
|
|
|
|
if (sinc4_3db_odr > sinc3_3db_odr) {
|
|
new_filter = AD7124_SINC3_FILTER;
|
|
new_odr = sinc4_3db_odr;
|
|
} else {
|
|
new_filter = AD7124_SINC4_FILTER;
|
|
new_odr = sinc3_3db_odr;
|
|
}
|
|
|
|
if (new_odr != st->channels[channel].cfg.odr)
|
|
st->channels[channel].cfg.live = false;
|
|
|
|
st->channels[channel].cfg.filter_type = new_filter;
|
|
st->channels[channel].cfg.odr = new_odr;
|
|
}
|
|
|
|
static struct ad7124_channel_config *ad7124_find_similar_live_cfg(struct ad7124_state *st,
|
|
struct ad7124_channel_config *cfg)
|
|
{
|
|
struct ad7124_channel_config *cfg_aux;
|
|
ptrdiff_t cmp_size;
|
|
int i;
|
|
|
|
cmp_size = (u8 *)&cfg->live - (u8 *)cfg;
|
|
for (i = 0; i < st->num_channels; i++) {
|
|
cfg_aux = &st->channels[i].cfg;
|
|
|
|
if (cfg_aux->live && !memcmp(cfg, cfg_aux, cmp_size))
|
|
return cfg_aux;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int ad7124_find_free_config_slot(struct ad7124_state *st)
|
|
{
|
|
unsigned int free_cfg_slot;
|
|
|
|
free_cfg_slot = find_first_zero_bit(&st->cfg_slots_status, AD7124_MAX_CONFIGS);
|
|
if (free_cfg_slot == AD7124_MAX_CONFIGS)
|
|
return -1;
|
|
|
|
return free_cfg_slot;
|
|
}
|
|
|
|
static int ad7124_init_config_vref(struct ad7124_state *st, struct ad7124_channel_config *cfg)
|
|
{
|
|
unsigned int refsel = cfg->refsel;
|
|
|
|
switch (refsel) {
|
|
case AD7124_REFIN1:
|
|
case AD7124_REFIN2:
|
|
case AD7124_AVDD_REF:
|
|
if (IS_ERR(st->vref[refsel])) {
|
|
dev_err(&st->sd.spi->dev,
|
|
"Error, trying to use external voltage reference without a %s regulator.\n",
|
|
ad7124_ref_names[refsel]);
|
|
return PTR_ERR(st->vref[refsel]);
|
|
}
|
|
cfg->vref_mv = regulator_get_voltage(st->vref[refsel]);
|
|
/* Conversion from uV to mV */
|
|
cfg->vref_mv /= 1000;
|
|
return 0;
|
|
case AD7124_INT_REF:
|
|
cfg->vref_mv = 2500;
|
|
st->adc_control &= ~AD7124_ADC_CTRL_REF_EN_MSK;
|
|
st->adc_control |= AD7124_ADC_CTRL_REF_EN(1);
|
|
return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL,
|
|
2, st->adc_control);
|
|
default:
|
|
dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ad7124_write_config(struct ad7124_state *st, struct ad7124_channel_config *cfg,
|
|
unsigned int cfg_slot)
|
|
{
|
|
unsigned int tmp;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
cfg->cfg_slot = cfg_slot;
|
|
|
|
tmp = (cfg->buf_positive << 1) + cfg->buf_negative;
|
|
val = AD7124_CONFIG_BIPOLAR(cfg->bipolar) | AD7124_CONFIG_REF_SEL(cfg->refsel) |
|
|
AD7124_CONFIG_IN_BUFF(tmp);
|
|
ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(cfg->cfg_slot), 2, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tmp = AD7124_FILTER_TYPE_SEL(cfg->filter_type);
|
|
ret = ad7124_spi_write_mask(st, AD7124_FILTER(cfg->cfg_slot), AD7124_FILTER_TYPE_MSK,
|
|
tmp, 3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ad7124_spi_write_mask(st, AD7124_FILTER(cfg->cfg_slot), AD7124_FILTER_FS_MSK,
|
|
AD7124_FILTER_FS(cfg->odr_sel_bits), 3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ad7124_spi_write_mask(st, AD7124_CONFIG(cfg->cfg_slot), AD7124_CONFIG_PGA_MSK,
|
|
AD7124_CONFIG_PGA(cfg->pga_bits), 2);
|
|
}
|
|
|
|
static struct ad7124_channel_config *ad7124_pop_config(struct ad7124_state *st)
|
|
{
|
|
struct ad7124_channel_config *lru_cfg;
|
|
struct ad7124_channel_config *cfg;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* Pop least recently used config from the fifo
|
|
* in order to make room for the new one
|
|
*/
|
|
ret = kfifo_get(&st->live_cfgs_fifo, &lru_cfg);
|
|
if (ret <= 0)
|
|
return NULL;
|
|
|
|
lru_cfg->live = false;
|
|
|
|
/* mark slot as free */
|
|
assign_bit(lru_cfg->cfg_slot, &st->cfg_slots_status, 0);
|
|
|
|
/* invalidate all other configs that pointed to this one */
|
|
for (i = 0; i < st->num_channels; i++) {
|
|
cfg = &st->channels[i].cfg;
|
|
|
|
if (cfg->cfg_slot == lru_cfg->cfg_slot)
|
|
cfg->live = false;
|
|
}
|
|
|
|
return lru_cfg;
|
|
}
|
|
|
|
static int ad7124_push_config(struct ad7124_state *st, struct ad7124_channel_config *cfg)
|
|
{
|
|
struct ad7124_channel_config *lru_cfg;
|
|
int free_cfg_slot;
|
|
|
|
free_cfg_slot = ad7124_find_free_config_slot(st);
|
|
if (free_cfg_slot >= 0) {
|
|
/* push the new config in configs queue */
|
|
kfifo_put(&st->live_cfgs_fifo, cfg);
|
|
} else {
|
|
/* pop one config to make room for the new one */
|
|
lru_cfg = ad7124_pop_config(st);
|
|
if (!lru_cfg)
|
|
return -EINVAL;
|
|
|
|
/* push the new config in configs queue */
|
|
free_cfg_slot = lru_cfg->cfg_slot;
|
|
kfifo_put(&st->live_cfgs_fifo, cfg);
|
|
}
|
|
|
|
/* mark slot as used */
|
|
assign_bit(free_cfg_slot, &st->cfg_slots_status, 1);
|
|
|
|
return ad7124_write_config(st, cfg, free_cfg_slot);
|
|
}
|
|
|
|
static int ad7124_enable_channel(struct ad7124_state *st, struct ad7124_channel *ch)
|
|
{
|
|
ch->cfg.live = true;
|
|
return ad_sd_write_reg(&st->sd, AD7124_CHANNEL(ch->nr), 2, ch->ain |
|
|
AD7124_CHANNEL_SETUP(ch->cfg.cfg_slot) | AD7124_CHANNEL_EN(1));
|
|
}
|
|
|
|
static int ad7124_prepare_read(struct ad7124_state *st, int address)
|
|
{
|
|
struct ad7124_channel_config *cfg = &st->channels[address].cfg;
|
|
struct ad7124_channel_config *live_cfg;
|
|
|
|
/*
|
|
* Before doing any reads assign the channel a configuration.
|
|
* Check if channel's config is on the device
|
|
*/
|
|
if (!cfg->live) {
|
|
/* check if config matches another one */
|
|
live_cfg = ad7124_find_similar_live_cfg(st, cfg);
|
|
if (!live_cfg)
|
|
ad7124_push_config(st, cfg);
|
|
else
|
|
cfg->cfg_slot = live_cfg->cfg_slot;
|
|
}
|
|
|
|
/* point channel to the config slot and enable */
|
|
return ad7124_enable_channel(st, &st->channels[address]);
|
|
}
|
|
|
|
static int ad7124_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
|
|
{
|
|
struct ad7124_state *st = container_of(sd, struct ad7124_state, sd);
|
|
int ret;
|
|
|
|
mutex_lock(&st->cfgs_lock);
|
|
ret = ad7124_prepare_read(st, channel);
|
|
mutex_unlock(&st->cfgs_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct ad_sigma_delta_info ad7124_sigma_delta_info = {
|
|
.set_channel = ad7124_set_channel,
|
|
.set_mode = ad7124_set_mode,
|
|
.has_registers = true,
|
|
.addr_shift = 0,
|
|
.read_mask = BIT(6),
|
|
.data_reg = AD7124_DATA,
|
|
.irq_flags = IRQF_TRIGGER_FALLING
|
|
};
|
|
|
|
static int ad7124_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
struct ad7124_state *st = iio_priv(indio_dev);
|
|
int idx, ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* After the conversion is performed, disable the channel */
|
|
ret = ad_sd_write_reg(&st->sd, AD7124_CHANNEL(chan->address), 2,
|
|
st->channels[chan->address].ain | AD7124_CHANNEL_EN(0));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
mutex_lock(&st->cfgs_lock);
|
|
|
|
idx = st->channels[chan->address].cfg.pga_bits;
|
|
*val = st->channels[chan->address].cfg.vref_mv;
|
|
if (st->channels[chan->address].cfg.bipolar)
|
|
*val2 = chan->scan_type.realbits - 1 + idx;
|
|
else
|
|
*val2 = chan->scan_type.realbits + idx;
|
|
|
|
mutex_unlock(&st->cfgs_lock);
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
mutex_lock(&st->cfgs_lock);
|
|
if (st->channels[chan->address].cfg.bipolar)
|
|
*val = -(1 << (chan->scan_type.realbits - 1));
|
|
else
|
|
*val = 0;
|
|
|
|
mutex_unlock(&st->cfgs_lock);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&st->cfgs_lock);
|
|
*val = st->channels[chan->address].cfg.odr;
|
|
mutex_unlock(&st->cfgs_lock);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
mutex_lock(&st->cfgs_lock);
|
|
*val = ad7124_get_3db_filter_freq(st, chan->scan_index);
|
|
mutex_unlock(&st->cfgs_lock);
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ad7124_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long info)
|
|
{
|
|
struct ad7124_state *st = iio_priv(indio_dev);
|
|
unsigned int res, gain, full_scale, vref;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&st->cfgs_lock);
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2 != 0) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
ad7124_set_channel_odr(st, chan->address, val);
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (val != 0) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (st->channels[chan->address].cfg.bipolar)
|
|
full_scale = 1 << (chan->scan_type.realbits - 1);
|
|
else
|
|
full_scale = 1 << chan->scan_type.realbits;
|
|
|
|
vref = st->channels[chan->address].cfg.vref_mv * 1000000LL;
|
|
res = DIV_ROUND_CLOSEST(vref, full_scale);
|
|
gain = DIV_ROUND_CLOSEST(res, val2);
|
|
res = ad7124_find_closest_match(ad7124_gain, ARRAY_SIZE(ad7124_gain), gain);
|
|
|
|
if (st->channels[chan->address].cfg.pga_bits != res)
|
|
st->channels[chan->address].cfg.live = false;
|
|
|
|
st->channels[chan->address].cfg.pga_bits = res;
|
|
break;
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
if (val2 != 0) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
ad7124_set_3db_filter_freq(st, chan->address, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&st->cfgs_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int ad7124_reg_access(struct iio_dev *indio_dev,
|
|
unsigned int reg,
|
|
unsigned int writeval,
|
|
unsigned int *readval)
|
|
{
|
|
struct ad7124_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (reg >= ARRAY_SIZE(ad7124_reg_size))
|
|
return -EINVAL;
|
|
|
|
if (readval)
|
|
ret = ad_sd_read_reg(&st->sd, reg, ad7124_reg_size[reg],
|
|
readval);
|
|
else
|
|
ret = ad_sd_write_reg(&st->sd, reg, ad7124_reg_size[reg],
|
|
writeval);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static IIO_CONST_ATTR(in_voltage_scale_available,
|
|
"0.000001164 0.000002328 0.000004656 0.000009313 0.000018626 0.000037252 0.000074505 0.000149011 0.000298023");
|
|
|
|
static struct attribute *ad7124_attributes[] = {
|
|
&iio_const_attr_in_voltage_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group ad7124_attrs_group = {
|
|
.attrs = ad7124_attributes,
|
|
};
|
|
|
|
static const struct iio_info ad7124_info = {
|
|
.read_raw = ad7124_read_raw,
|
|
.write_raw = ad7124_write_raw,
|
|
.debugfs_reg_access = &ad7124_reg_access,
|
|
.validate_trigger = ad_sd_validate_trigger,
|
|
.attrs = &ad7124_attrs_group,
|
|
};
|
|
|
|
static int ad7124_soft_reset(struct ad7124_state *st)
|
|
{
|
|
unsigned int readval, timeout;
|
|
int ret;
|
|
|
|
ret = ad_sd_reset(&st->sd, 64);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
timeout = 100;
|
|
do {
|
|
ret = ad_sd_read_reg(&st->sd, AD7124_STATUS, 1, &readval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(readval & AD7124_STATUS_POR_FLAG_MSK))
|
|
return 0;
|
|
|
|
/* The AD7124 requires typically 2ms to power up and settle */
|
|
usleep_range(100, 2000);
|
|
} while (--timeout);
|
|
|
|
dev_err(&st->sd.spi->dev, "Soft reset failed\n");
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int ad7124_check_chip_id(struct ad7124_state *st)
|
|
{
|
|
unsigned int readval, chip_id, silicon_rev;
|
|
int ret;
|
|
|
|
ret = ad_sd_read_reg(&st->sd, AD7124_ID, 1, &readval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
chip_id = AD7124_DEVICE_ID_GET(readval);
|
|
silicon_rev = AD7124_SILICON_REV_GET(readval);
|
|
|
|
if (chip_id != st->chip_info->chip_id) {
|
|
dev_err(&st->sd.spi->dev,
|
|
"Chip ID mismatch: expected %u, got %u\n",
|
|
st->chip_info->chip_id, chip_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (silicon_rev == 0) {
|
|
dev_err(&st->sd.spi->dev,
|
|
"Silicon revision empty. Chip may not be present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
|
|
struct device_node *np)
|
|
{
|
|
struct ad7124_state *st = iio_priv(indio_dev);
|
|
struct ad7124_channel_config *cfg;
|
|
struct ad7124_channel *channels;
|
|
struct device_node *child;
|
|
struct iio_chan_spec *chan;
|
|
unsigned int ain[2], channel = 0, tmp;
|
|
int ret;
|
|
|
|
st->num_channels = of_get_available_child_count(np);
|
|
if (!st->num_channels) {
|
|
dev_err(indio_dev->dev.parent, "no channel children\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
|
|
sizeof(*chan), GFP_KERNEL);
|
|
if (!chan)
|
|
return -ENOMEM;
|
|
|
|
channels = devm_kcalloc(indio_dev->dev.parent, st->num_channels, sizeof(*channels),
|
|
GFP_KERNEL);
|
|
if (!channels)
|
|
return -ENOMEM;
|
|
|
|
indio_dev->channels = chan;
|
|
indio_dev->num_channels = st->num_channels;
|
|
st->channels = channels;
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
cfg = &st->channels[channel].cfg;
|
|
|
|
ret = of_property_read_u32(child, "reg", &channel);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (channel >= indio_dev->num_channels) {
|
|
dev_err(indio_dev->dev.parent,
|
|
"Channel index >= number of channels\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = of_property_read_u32_array(child, "diff-channels",
|
|
ain, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
st->channels[channel].nr = channel;
|
|
st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
|
|
AD7124_CHANNEL_AINM(ain[1]);
|
|
|
|
cfg->bipolar = of_property_read_bool(child, "bipolar");
|
|
|
|
ret = of_property_read_u32(child, "adi,reference-select", &tmp);
|
|
if (ret)
|
|
cfg->refsel = AD7124_INT_REF;
|
|
else
|
|
cfg->refsel = tmp;
|
|
|
|
cfg->buf_positive = of_property_read_bool(child, "adi,buffered-positive");
|
|
cfg->buf_negative = of_property_read_bool(child, "adi,buffered-negative");
|
|
|
|
chan[channel] = ad7124_channel_template;
|
|
chan[channel].address = channel;
|
|
chan[channel].scan_index = channel;
|
|
chan[channel].channel = ain[0];
|
|
chan[channel].channel2 = ain[1];
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
of_node_put(child);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7124_setup(struct ad7124_state *st)
|
|
{
|
|
unsigned int fclk, power_mode;
|
|
int i, ret;
|
|
|
|
fclk = clk_get_rate(st->mclk);
|
|
if (!fclk)
|
|
return -EINVAL;
|
|
|
|
/* The power mode changes the master clock frequency */
|
|
power_mode = ad7124_find_closest_match(ad7124_master_clk_freq_hz,
|
|
ARRAY_SIZE(ad7124_master_clk_freq_hz),
|
|
fclk);
|
|
if (fclk != ad7124_master_clk_freq_hz[power_mode]) {
|
|
ret = clk_set_rate(st->mclk, fclk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Set the power mode */
|
|
st->adc_control &= ~AD7124_ADC_CTRL_PWR_MSK;
|
|
st->adc_control |= AD7124_ADC_CTRL_PWR(power_mode);
|
|
ret = ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL, 2, st->adc_control);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&st->cfgs_lock);
|
|
INIT_KFIFO(st->live_cfgs_fifo);
|
|
for (i = 0; i < st->num_channels; i++) {
|
|
|
|
ret = ad7124_init_config_vref(st, &st->channels[i].cfg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* 9.38 SPS is the minimum output data rate supported
|
|
* regardless of the selected power mode. Round it up to 10 and
|
|
* set all channels to this default value.
|
|
*/
|
|
ad7124_set_channel_odr(st, i, 10);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ad7124_reg_disable(void *r)
|
|
{
|
|
regulator_disable(r);
|
|
}
|
|
|
|
static void ad7124_clk_disable(void *c)
|
|
{
|
|
clk_disable_unprepare(c);
|
|
}
|
|
|
|
static int ad7124_probe(struct spi_device *spi)
|
|
{
|
|
const struct ad7124_chip_info *info;
|
|
struct ad7124_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int i, ret;
|
|
|
|
info = of_device_get_match_data(&spi->dev);
|
|
if (!info)
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->chip_info = info;
|
|
|
|
ad_sd_init(&st->sd, indio_dev, spi, &ad7124_sigma_delta_info);
|
|
|
|
indio_dev->name = st->chip_info->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &ad7124_info;
|
|
|
|
ret = ad7124_of_parse_channel_config(indio_dev, spi->dev.of_node);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(st->vref); i++) {
|
|
if (i == AD7124_INT_REF)
|
|
continue;
|
|
|
|
st->vref[i] = devm_regulator_get_optional(&spi->dev,
|
|
ad7124_ref_names[i]);
|
|
if (PTR_ERR(st->vref[i]) == -ENODEV)
|
|
continue;
|
|
else if (IS_ERR(st->vref[i]))
|
|
return PTR_ERR(st->vref[i]);
|
|
|
|
ret = regulator_enable(st->vref[i]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, ad7124_reg_disable,
|
|
st->vref[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
st->mclk = devm_clk_get(&spi->dev, "mclk");
|
|
if (IS_ERR(st->mclk))
|
|
return PTR_ERR(st->mclk);
|
|
|
|
ret = clk_prepare_enable(st->mclk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ad7124_soft_reset(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ad7124_check_chip_id(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ad7124_setup(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
|
|
}
|
|
|
|
static const struct of_device_id ad7124_of_match[] = {
|
|
{ .compatible = "adi,ad7124-4",
|
|
.data = &ad7124_chip_info_tbl[ID_AD7124_4], },
|
|
{ .compatible = "adi,ad7124-8",
|
|
.data = &ad7124_chip_info_tbl[ID_AD7124_8], },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad7124_of_match);
|
|
|
|
static struct spi_driver ad71124_driver = {
|
|
.driver = {
|
|
.name = "ad7124",
|
|
.of_match_table = ad7124_of_match,
|
|
},
|
|
.probe = ad7124_probe,
|
|
};
|
|
module_spi_driver(ad71124_driver);
|
|
|
|
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7124 SPI driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
|